2015 Citroen BERLINGO MULTISPACE belt

85
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Row 3 seat adjustments
Placing the seat backrest in the
table position
- 
Lower
  the   head   restraint   fully.
-
o perate the control to fold the seat
backrest
  onto   the   seat   cushion.
Returning the seat backrest to the
sitting position
-
 
Release
  the   seat   backrest   by  
pullin

g the control, then return it to
its
  original   position.
-
 
Check
  that   it   has   correctly   locked   in  
place. Returning the seat to its original
position
-

 
Push
  the   red   control.
-
 
Unfold
  the   entire   seat.
Placing the seat in the fully folded
position
-
 
Place
  the   seat   in   the   table   position.
-
 
Raise
  the   bar   fitted   with   a   red  
strap, located behind the seat, to
release

  feet   of   the   seat   from   their  
anchorage

  on   the   floor.
-
 
T
ilt   the   entire   seat   forwards.Ensure
  that:
-
 
the
  seat   is   locked   securely   on  
the

  floor,
-

the seat belt is available for
the

  passenger.
EaSE oF USE and CoMFoRT
4
Seats

86
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Entering, exiting from Row 3
Entering
-
Place the row 2 seat in the table
position.
Exiting
-

 
Lower
  the   head   restraint   fully.
-
o perate the yellow control, located
on
  the   back   of   the   row   2   seat  
backrest.
-

 
Fold
  the   seat   backrest   to   the   table  
position.Ensure that the centre seat belt is
stowed correctly in its housing in
the

  headlining.
-

T
ilt it to the fully folded position to
allow
  access. -

Pull the red strap to place the seat
in

  the   fully   folded   position.
-  T ilt   the   entire   seat   forwards.
-  
Exit
  via   the   side   door.
Before
  folding   it   back,   ensure   that  
the feet of the passenger in row 3
are not obstructing the row 2 seat
anchoring

  points.
Seats

88
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Operating the Row 3 seats
Removing the seat
- 
Lower
  the   head   restraint.
-

Place the seat in the fully folded
position.
-

 
T
ilt   the   entire   seat   forwards.
-
 
On
  each   side,   take   hold   of   the  
uprights of the folded seat, tilting it
forward

  slightly,   and   lift   it.Refitting the seat
The label on the seat indicates the
position
  in   which   it   must   be   installed.
-
 
Place
  the   hooks   of   the   front   feet  
between

  the   two   bars.
-
 
Ensure
  that   no   object   or   foot   is  
obstructing the rear anchorage
points and that the seat belt is
positioned correctly and available
for

  use.
-
 
Fold
  back   the   seat   to   fix   its   rear  
anchoring

  feet.
-
o perate the control to raise the
seat
  back   to   its   initial   position.
-
 
Raise
  the   head   restraint.
Good practice
Following the various operations:
-  
do
  not   remove   a   head   restraint  
without stowing it; secure it inside
the vehicle,
-


ensure that the passengers can
always access the seat belts and
fasten

  them   easily,
-
 
passengers
  must   never   take  
their

  seat   without   adjusting   and  
fastening

  their   seat   belt.
-
 
a
  passenger   seated   in   row   3   must  
ensure that he does not obstruct
the row 2 seat anchorage points,
-

 
a
  passenger   seated   in   row   3   must  
not

  have   the   seat   in   front   of   them   in  
row 2 in the folded position; this is
in case the seat could tip towards
the passenger unexpectedly and
injure

  them.
Do
  not   place   hard   or   heavy   objects   on  
the

  seat   backs   forming   a   table,   they  
could

  become   dangerous   projectiles   in  
the

  event   or   sharp   braking   or   impact.
Seats

104
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
REAR FITTINGS
(7 SEAT VERSION )
Cup holder
Any liquid carried in a cup (mug or other) on board which could spill,
presents   a   risk.
Take
  care.
12 volt socket (120 W max)
It is advisable to limit the use of this socket   to   avoid   discharging   the   battery.
Stowing rings
Use the stowing rings on the floor to secure  and   retain   your   loads   firmly.
The
  seat   belt   anchorages   must   not   be  
used

  for   this   purpose.
It
  is   recommended   that   the   load   is
 immobilised

  by   securing   it   firmly
 using

  the   stowing   rings   on   the   floor.
Practical information

105
Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015Berlingo-2-VP_en_Chap04_Ergonomie_ed01-2015
Storage flaps
Raise the corresponding flap.next to the boot sill, the recess is
intended to receive the roller tube
containing
  the   load   space   cover.
Seat belts
Ensure that the centre seat belt has
reeled in correctly to its carrier in the
roof.
Prevent
  the   row   3   seat   belt   buckles  
from

  knocking   by   raising   them   as   close  
as possible to the anchorages in the
roof.
The

  seat   belt   buckle   attachment   rings  
on

  each   side   of   the   boot   must   not   be  
used

  to   retain   loads.
EaSE oF USE and CoMFoRT
4
Practical information

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
123
SEAT BELTS
Height adjustment
Squeeze the control with the return and
slide  the   assembly   on   the   driver's   seat  
side and on the individual passenger
seat

  side.
Fastening
Pull the strap, then insert the tongue
into  the   buckle.
Check
  that   the   seat   belt   is   fastened  
correctly

  by   pulling   the   strap.
Seat belt(s) not fastened
warning lamp Unfastening
Press the red button.
When the vehicle is started,
this
  warning   lamp   comes   on  
if a user at the front has not
fastened

  their   seat   belt.
Good practice
The driver must ensure that passengers use the seat belts correctly
and that they are all strapped in
securely  before   moving   off.
Wherever you are seated in the
vehicle, always fasten your seat belt,
even
  for   short   journeys.
The
  seat   belts   are   fitted   with   an   inertia  
reel

  which   automatically   adjusts   the  
length

  of   the   strap   to   your   size.
d

o not use accessories (clothes pegs,
clips,
  safety   pins,   etc.)   which   allow   the  
seat

  belt   straps   to   fit   loosely.
Ensure that the seat belt has reeled in
correctly
  after   use.
After
  folding   or   moving   a   seat   or   a   rear  
bench seat, ensure that the seat belt
has reeled in correctly and that the
buckle

  is   ready   to   accommodate   the  
tongue.
d

epending on the nature and
seriousness
  of   any   impact,   the  
pretensioning

  device   may   be   deployed  
before

  and   independently   of   inflation  
of

  the   airbags.   It   instantly   tightens  
the seat belts against the body of the
occupants.
Deployment

  of   the   pretensioners   is  
accompanied

  by   a   slight   discharge  
of

  harmless   smoke   and   a   noise,   due  
to the activation of the pyrotechnic
cartridge

  incorporated   in   the   system.
The
 
front
 
passenger's
 
seat
 
may
 
be
 
fitted

 
with

 
a

 
presence

 
detector

,
 
in

 
which

 
case you should not place anything
heavy on this seat as this could trigger
the

 
alert.
Seat belts
SaFETY
5

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
124
Recommendations for children:
-
use a suitable child seat if the
passenger is less than 12 years old
or

  shorter   than   one   metre   fifty,
-

never allow a child to travel on
your lap, even with the seat belt
fastened. For

  more   information   on   child  
seats, refer to the "Children on
board"

  section   of   chapter   5.
Clean the seat belt straps with
soapy water or a textile cleaning
product, sold by CITR
o Ë n
dealers.
In accordance with current safety
regulations, your CITR
o Ë n dealer can
guarantee
  all   work   or   any   checks,   from  
testing

  to   maintenance,   on   your   seat  
belt

  equipment.
Have
  the   seat   belts   checked   regularly  
(even

  after   a   minor   impact)   by   a  
CITROËN

  dealer   or   a   qualified  
workshop:

  they   must   not   show   any  
signs of wear

, cutting or fraying
and
  they   must   not   be   converted   or  
modified.
The

 
force
 
limiter
 
reduces
 
the
 
pressure
 of the seat belt against the body of the
occupants.
The pretensioning seat belts are active
when
 
the
 
ignition
 
is
 
switched
 
on.
The
 
inertia
 
reels
 
are
 
fitted
 
with
 
a
 
device
 
which

 
automatically
 
locks
 
the
 
strap
 
in
 
the

 
event
 
of
 
a
 
collision
 
or
 
emergency
 
braking

 
or
 
if
 
the
 
vehicle
 
rolls
 
over.
You can unfasten the seat belt by
pressing
 
the
 
red
 
button
 
on
 
the
 
buckle.
 
Guide

 
the
 
seat
 
belt
 
after
 
unfastening.
The
 
airbag
 
warning
 
lamp
 
comes
 
on
 
if

 
the
 
pretensioners
 
are
 
deployed.
 
Contact a CITR

o
Ë
n
dealer or a
qualified
 
workshop.
In
 
order
 
to
 
be
 
effective,
 
a
 
seat
 
belt:
-
 
must

 
restrain
 
one
 
person
 
only,
-
 
must

 
not
 
be
 
twisted,
 
check
 
by
 
pullin

g in front of you with an even
movement,
-
 
must

 
be
 
tightened
 
as
 
close
 
to
 
the
 
body

 
as
 
possible.
The upper part of the seat belt should
be positioned in the hollow of the
shoulder.
The lap part should be placed as low
as
 
possible
 
on
 
the
 
pelvis.
d

o not interchange the seat belt
buckles
 
as
 
they
 
will
 
not
 
fulfil
 
their
 
role
 
properly

.
 
If
 
the
 
seats
 
are
 
fitted
 
with
 
armrests,

 
the
 
lap
 
part
 
of
 
the
 
seat
 
belt
 
should

 
always
 
pass
 
under
 
the
 
armrest.
Check
 
that
 
the
 
seat
 
belt
 
is
 
fastened
 
correctly

 
by
 
pulling
 
the
 
strap
 
firmly.Front seat belts
The front seats are fitted with pretensioners   and   force   limiters.
Rear seat belts
(5 seat version)
The rear seats are fitted with three-
point   inertia   reel   seat   belts.
Seat belts

Berlingo-2-VP_en_Chap05_Securite_ed01-2015
125
Rear seat belts
(7 seat version)
In row 2
The  three   seats   are   fitted   with   three-
point
  inertia   reel   seat   belts.
When folding the side seats or the
seat
  backs   to   the   table   position,   avoid  
trapping the strap of the centre seat
belt.
When handling the side seats
(removing/installin

g)   or   when  
accessing

  row   3,   avoid   hooking   the  
centre

  seat   belt.
Ensure that the centre seat belt is
rolled up correctly in its strengthener
on
  the   roof. In row 3
The
  two   seats   are   fitted   with   three-
point   inertia   reel   seat   belts.d
o not attach the seat belts to the
stowing
  rings   marked   with   a   red   cross,  
represented

  on   the   label.
Take
  care   to   hook   the   seat   belts  
correctly on the rings provided for this
purpose.The row 3 seat belts which are not in
use can be stored to clear the load
space

  and   make   use   of   the   load   space  cover
  easier.
Hook   the   snap   hook   in   the   location  provided
  on   the   rear   pillar   trim.
Seat belts
SaFETY
5