173
Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2015Berlingo-2-VP_en_Chap08_aide-rapide_ed01-2015
4. Procedure
- Place the foot of the jack in contact with the ground directly below the
jacking
point closest to the wheel to
be
changed.
-
Extend
the jack until its head
comes
into contact with the jacking
point used; the vehicle's contact
area
A must be engaged with the
head
of the jack.
-
Raise the vehicle until there is
sufficient
space between the wheel
and the ground, so that
(not punctured) spare wheel can be
easily
fitted.
-
Resume
and complete the
unscrewing
of the wheel bolts.
-
Remove
the bolts and remove the
wheel.
-
Remove
the
wheel
trim.
-
Loosen the wheel bolts and start
unscrewing
them. Ensure
that the jack is stable, the foot of
the jack must be in contact with the
ground,
and directly below the jacking
point
used.
If the ground is slippery or loose, the
jack
may slip or drop - Risk of injury!
Ensure
that the jack is positioned only
at
one of the jacking points under the
vehicle,
making sure that the vehicle's
contact surface is centred on the head
of
the jack.
Otherwise
there is a risk of damage
to
the vehicle and/or of the jack
dropping -
Risk of injury!
Do
not extend the jack until you have
started unscrewing the bolts on the
wheel to be changed and have placed
the
chock under the wheel diagonally
opposite.
QUICk HELP
8
Changing a wheel
