2015 CHRYSLER 200 warning

[x] Cancel search: warning

Page 224 of 698

CHRYSLER 200 2015 2.G Owners Manual ParkSense® Sensors
The four ParkSense® sensors, located in the rear fascia/
bumper, monitor the area behind the vehicle that is
within the sensors’ field of view. The sensors can detect
obstacles

Page 228 of 698

CHRYSLER 200 2015 2.G Owners Manual The vehicle is close to the obstacle when the warning
display shows one flashing arc and sounds a continuous
tone. The following chart shows the warning alert opera-
tion when the system is detecting

Page 229 of 698

CHRYSLER 200 2015 2.G Owners Manual WARNING ALERTS
Audible Alert
Chime None Single 1/2-
SecondTone
(for rear centeronly) Slow
(for rear centeronly) Slow
(for rear centeronly) Fast
(for rear centeronly) Fast Continuous
Radio Vol- ume Re-

Page 233 of 698

CHRYSLER 200 2015 2.G Owners Manual CAUTION!
•ParkSense® is only a parking aid and it is unable to
recognize every obstacle, including small obstacles.
Parking curbs might be temporarily detected or not
detected at all. Obstacles loc

Page 234 of 698

CHRYSLER 200 2015 2.G Owners Manual WARNING!(Continued)
•Before using ParkSense®, it is strongly recom-
mended that the ball mount and hitch ball assem-
bly is disconnected from the vehicle when the
vehicle is not used for towing. Fa

Page 236 of 698

CHRYSLER 200 2015 2.G Owners Manual until the vehicle speed is increased to approximately
7 mph (11 km/h) or above. When in REVERSE and above
the system’s operating speed, a warning will appear in
the EVIC/DID indicating the vehicle s

Page 237 of 698

CHRYSLER 200 2015 2.G Owners Manual The ParkSense® Warning screen is located within the
Electronic Vehicle Information Center (EVIC) or Driver
Information Display (DID). It provides visual warnings
to indicate the distance between the

Page 241 of 698

CHRYSLER 200 2015 2.G Owners Manual The vehicle is close to the obstacle when the warning
display shows one flashing arc and sounds a continuous
tone. The following chart shows the warning alert opera-
tion when the system is detecting