2015 BMW ACTIVE HYBRID 5 Owner's Manual

Page 105 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual Settings on the Control
Display
Time
Setting the time zone1."Settings"2."Time/Date"3."Time zone:"4.Select the desired time zone.
The time zone is stored.
Setting the time
1."Settings"2."Time/Date"3."T

Page 106 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual Units of measure
Setting the units of measure
To set the units for fuel consumption, route/
distance and temperature:1."Settings"2."Language/Units"3.Select the desired menu item.4.Select the desired u

Page 107 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual Display
Overview▷Speed.▷Navigation system.▷Check Control messages.▷Selection list from the instrument cluster.▷Driver assistance systems.
Some of this information is only displayed
briefly a

Page 108 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual LightsVehicle features and optionsThis chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in

Page 109 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual Headlight courtesy delay featureThe low beams stay lit for a short while after
the radio-ready state is switched off if the
lights are turned off and the headlight flasher is
switched on.
Setting the

Page 110 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual In tight curves, e.g., on mountainous roads or
when turning, an additional, corner-illuminating
lamp is switched on that lights up the inside of
the curve when the vehicle is moving below a
certain sp

Page 111 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual Switching the high beams on and off
manually▷High beams on, arrow 1.▷High beams off/headlight flasher, arrow 2.
The High-beam Assistant can be switched off
when manually adjusting the light. To re

Page 112 of 257

BMW ACTIVE HYBRID 5 2015 F10H Owners Manual Overview1Interior lights2Reading lamp
Switching the interior lights on and offPress button.
To reel off permanently: press the button for
approx. 3 seconds.
Switch back on: press button.
Reading light