132 Homelink
@ Tips
To open the garage door, press the button,
but do not press it for longer ten seconds
or the Homelink modu le will switch to
programming mode.
Programming transmitters
Applies to vehicles: with Home link
Fig. 152 Left front area of the bumper
You can program both fixed code and rolling
code systems using these instructions .
Programming a button
> Make sure your vehicle is wi thin operating
range of the remote controlled garage door
opener .
> Set the parking brake¢.&. in General infor
mation on page 131.
> Switch the ign ition on. Do not start the en
gine!
> There are two ways to program a button: press the button that you would like to pro
gram. The MMI will display instruct ions to
guide you through the programming. Or
> Se lect: I CAR I function button> Car systems
control button > Vehicle settings > Garage
door opener
> Program garage door open
er .
.. Se lect the b utton that you wo uld like to pro
gram.
.. Follow the instructions in the MMI.
• If the garage door open ing must also be
synchronized with the Homelink module,
refer to the owner's manual for the garage
doo r opener .
Erasing the button programming
> Select: I CAR I function button > Car systems
function key > Vehicle settings> Garage
door opener
> Clear program settings >
Yes.
Displaying the version/status/country
code
.. Select: I CAR I function button > Car systems
contro l button > Vehicle settings > Garage
door opener > Version information .
Programming a button
Th e requ ired distan ce between the handheld
transmitter and the Homelink module in the
bumper depends on the system that you are
programming. When programming a new de
vice, keep the button pressed for at least 15
seconds before trying aga in with the transmit
ter in a different position.
Each of the buttons can be reprogrammed in
dividua lly. The procedure is the same as for in
itial programm ing.
c> page 132, Programming
a button.
Erasing the button programming
Individual buttons can be reprogrammed . Fol
l ow the same steps used when first program
ming the button.
If you wo uld like to erase all prog rammed but
tons at the same time, select Erase button
programming.
(D Tips
- To ensure your safety, eras ing the pro
grammed Homelink buttons before sell
ing the vehicle is recommended.
- Depending on the model of the garage
door opener, you may need to release the
button on the remote and press it again
when programming.
188 Child Safet y
@ Tips
-In Canada, the terms "top tether" with
"lower universa l anchorages" (or "lower
universal anchorage bars") are used to
describe the system.
- In other countries, the term "ISO FIX" is used to describe the lower anchorages .
Location
Fig. 180 Sch ematic overv ie w: LA TCH ancho rage point
l oca tion s
The illustration shows the seating locations in
your veh icle which are equipped w ith the low
e r anchorages system.
Description
The lower anchorage positions are marked
for quick locating .
Fig. 181 Re ar seatbacks : loca tor b utto ns fo r low er an
chor ages
Fig. 182 Rea r seats: lowe r an cho rage b racket loc ations
Atta chment l ocato r marker s for lowe r
anchorages
Circular locator buttons on the rear seatback
indica te t he lower an chorage locations on the
rear seating posi tions
¢ fig. 181.
Lower anch orages
The lower anchorage attachment po ints are
located between the rea r seatback and rear
seat cushion
¢ fig . 182.
Lower anchorages secure the chi ld res train t in
the seat without using the vehicle's safety belts . Ancho rages provide a secure and easy
to-use attachment and minimize the possibili
ty of imp roper ch ild restra int installa tion.
All child restraints manufactured after Sep
tember 1, 2002 , must have lower anchorage
attachments for the
LATCH system.
Remember that the lower anchorage po ints
are o nly intended for installation and attach
ment of child restraints specifically certified
for use with
LATCH lower anchorages. Chi ld
rest raints that are not equipped wi th the low
er anchorage attachments can still be insta l
led in compliance with the child restraint
manufacturer 's instructions on us ing vehicle
safety belts .
Ln._ WARNING
-Improper use of LATCH lower anchorages
can cause serious personal injury in an ac
cident.
- Always carefu lly follow the child re
straints manufacturer's instructions for
proper installation of the child restraint
