M N
er
u..
co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the right direction.
Using a replacement tire with a tre ad
patte rn intend ed for us e in a specific
directi on
When us ing a replacement t ire with a tread
pattern intended for use in a specific direc
tion, please note the fo llowing:
- T he direction of rotation is marked by an
ar
row on th e side of the tire.
- If the replacement tire has to be installed in
t h e incorrect d irection, use the tire only
temporarily since the tire will no t be able to
achieve its optimum performance character
istics with regard to aquaplaning, noise and
wear .
- We recommend that you pay particular at
tention to this fact during wet weather and
that you adjust your speed to match road conditions.
- Replace the flat tire with a new one and
have it installed on your veh icle as soon as
poss ible to restore the handling advantages
of a unid irect ional tire.
Notes on wheel changing
P lease read the information ¢ page 230, New
tires and replacing tires and wheels
i f you are
go ing to use a replacement tire w hich is dif
fe rent from the tires on your vehicle.
After you change a ti re:
- Chec k the ti re p ress ure on the rep lacement
t ire immed ia tel y aft er in stall ation.
- Ha ve the wheel bolt tightening torque
checked w ith a to rqu e wrench as soon as
possible by your autho riz ed Aud i dealer o r
qualifi ed wor kshop .
- With steel and allo y wheel rims , the wheel
bol ts are correctl y tightened at a to rque of
9 0 ft lb s. (120 Nm ).
- If y ou no tice th at the whee l bolts are cor
roded and d ifficult to tu rn whil e cha nging
What do I do now? 249
a tire , th ey s hould be repl aced before you
c heck the tightening torq ue.
- Repl ac e th e flat ti re with a new on e and
ha ve it in sta lled on you r veh icle as s oon a s
po ssible. Remount the whee l cove r.
Until then , dri ve with extr a care and at r e
du ced sp ee ds.
A WARNING
-=
- If you are going to equip your vehicle
with tires or rims which differ from those
which were factory installed, then be sure to read the information ¢
page 230,
New tires and replacing tires and
wheels.
- Always make sure the damaged wheel or
even a flat tire and the jack and tool kit
are properly secured in the luggage com
partment and are not loose in the pas
senger compartment.
- In an accident or sudden maneuver they
co uld fly forwa rd, injuring anyone in the
veh icle.
- Always sto re damaged wheel, jack and
too ls securely in the luggage compa rt
men t. Othe rwise, in an accident or s ud
den maneuver they co uld f ly forward,
causing injury to passengers in the vehi
cle.
([) Note
Do not use commercially avai lab le tire
sea lants. O therwise, the e lectr ica l compo
nents of the tire pressure monitoring sys
tem * wi ll no longer work properly and the
sensor for the tire pressure mon itor ing
system* will have to be replaced by quali
fied workshop. •
•
