2015 AUDI RS5 CABRIOLET homelink

40 Opening and clo sing
-I «:s I button on the master key
- Handle in the rear lid
When the valet parking feature is activated,
the message
V ale t park ing activat ed appea rs
in the ins trument cluster display when you
switc h the ignition on.
Garage door opener
(Homelink)
Description
App lies to vehicles: with garage door opener ( Homelink)
Fig. 33 Garage door ope ner: exa mples of u sing wit h
diff erent sy stems
You can activate various systems such as ga ­
rage doors, sec urity systems and home light­
ing from inside yo ur vehicle using the ga rage
door opener (Homelink). There are three but­
tons for this in the vehicle headliner that can
be in used in place of up to three hand -he ld
transmitters.
To operate systems using the garage door
opener , the three buttons in the roof headlin­
er must be programmed first .
A WARNING
Make sure no people or objects are in the
immediate vicinity of the equipment when
using or programm ing the garage doo r
opene r. People can be injured and objects
can be damaged if they are caught in the
equipment .
@ Tips
-Fo r security reasons, we recommend that
you clear the programmed buttons be­
fore se lling the vehicle. -
For add itiona l information about Home­
Link, visit www.homelink .com.
- For Declara tion of Compliance to United
States FCC and Ind ustry Canada reg ula ­
tions
c::> page 267.
' . Operation
Applies to vehicles: with garage door opener (Homelink)
Fig. 3 4 Headli ner: con tro l uni t
Requir ement: The buttons in the roof head lin­
er must be programmed
c::> page 40 or
c::> page 41 and the ve hicle must be within
range of the system, such as the garage door
opener.
.,. Press the b utton to open t he garage door.
The LED @ blinks o r turns on .
.,. Press the button aga in to close the garage
door.
(D Tip s
To open or close the garage door, press the
button, but do not hold it for longer than
10 seconds or the garage door opener
module will switch to programming mode.
Programming the buttons (version A)
Applies to vehicles: with garage door opener (Homelink)
You can program both fixed code and rol ling
code systems using this procedu re .
Pro gramming or repr ogramm ing buttons
.,. Switch the ignition on .
.,. Press and hold the button in the roof head­
liner
c::> page 40, fig . 34 that you wou ld like
to prog ram for at least 10 seconds. Or
.,. Select:
!CARI function button> Car sy ste m s*
contro l butto n > Vehicle setting s > Garage IJJI,

"' N
a: LL co
rl I.O
"' rl
"' rl
door opener> Program garage door open­
er.
If this path is not available, program the
button as described in version
Bqpage41 .
.,. Follow the instructions in the MMI.
Erasing button programming
The programmed buttons cannot be erased
individually. They must all be erased together.
Reprogram the buttons if necessary .
.,. Select:
ICARI function button> Car systems*
control button > Vehicle settings > Garage
door opener> Clear program settings
>
Yes .
Displaying the version/status/country
code
.,. Select: I CARI function button > Car systems*
control button > Vehicle settings > Garage
door opener > Version information.
@ Tips
-Programming through the MMI* is not
possible with all infotainment systems.
If this is the case, program the buttons
as described in version B
c:> page 41.
- The required distance between the hand
transmitter and the HomeLink module in
the radiator grille
c:> page 41; fig. 35
depends on the system that you are pro­
gram ming.
- Depending on the model of the system,
you may need to release the button on
the remote control during programming
and press it again. Hold each position
you try for at least 15 seconds before
trying another position. Keep the turn
signals on your vehicle in view when do­
ing this.
- After programming the garage door
opener, it may be necessary to synchron­i ze the motor with the system. Refer to
the manufacturer's instructions.
Opening and closing 41
Programming the buttons (version 8)
Applies to vehicles: with garage door opener (Homelink)
Fig. 35 Distance be tween the ra diato r grille and the
hand transmitter
Programming the button: Part 1 with the
controls
1. Switch the ignition on.
2. Press and hold both outer buttons in the
roof headliner
c:> page 40, fig. 34 until the
LED @turns off completely (after about
20 seconds). This procedure clears the
standard codes that were set at the facto ­
ry and does
not need to be repeated again
to program the other buttons.
3. Briefly press the button on the roof head­
liner that you would like to program.
4. Wait until the LED @ begins to blink
quickly. Programming mode is active for 5
minutes.
5. Move in front of your vehicle while hold­
ing the original remote control for the
system that would like to program to a
button in the roof headliner.
Programming the button: Part 2 at the
radiator grille
6. Hold the remote control up to the radiator
grille on your vehicle
c:> fig. 35.
7. Press and hold the remote control until
the turn signals on your vehicle blink. This
may take up to 30 seconds.
8. If the emergency flashers blink three
times, the programming was successful.
If the emergency flashers only blink one
time, the 5 minute time limit for the pro­
gramming has ended or the programming
was not successful. Repeat the program­
ming from the third step, or try changing
t he distance to the radiator grille. .,.

42 Openin g and clo sing
9 . I f the garage door or other system does
not open using the buttons in the roof
headliner even though the programming
was successful, the system may use a roll­ ing code instead of a fixed code.
Roll ing
code pro gramming
must be performed
¢ page 42.
The other two buttons in the roof headliner
can be programmed according to the instruc­
tions above . Begin with the third step .
Erasing butt on progr amming
The programmed buttons cannot be erased
individually . They must all be erased together.
Reprogram the buttons if necessary.
.. Switch the ignition on.
.. Press and ho ld both outer buttons in the
roof headline r until the LE D @ turns off
completely (after about 20 seconds).
Re prog ramming th e button s
.. Switch the ignition on.
.. To reprogram an individual button, press
and hold the button until the LED@ starts
to flash quick ly (after about 10 seconds) .
Re lease the button immediately. Program­
ming mode is active for 5 minutes .
.. Continue with the fifth step .
(D Tips
-Programming using the buttons in the
roof headliner is not possible with all In­
fota inment systems. If this is the case,
program the buttons as described in ver­
s ion A¢ page 40 .
- The requ ired distance between the hand
transmitter and the Home Link module in
the radiato r grille ¢ fig. 35 depends on
the system tha t you are programming.
- Depend ing on the model of the system,
you may need to release the but ton on
the remote contro l during programming
and press it again . Ho ld each position
you try for at least 15 seconds before
trying another position. Keep the turn
s ignals on your vehicle in v iew when do­
i ng th is.
Rolling code programming
Applies to vehicles: with garage door opener (Homelink)
Rolling code programming is also needed for
some systems .
Identifying a rolling cod e
.. Press and hold the button in the roof head ­
liner that was already programmed .
.. Watch the LED@¢ page 40, fig. 34. If the
LE D blinks quickly, the systems (such as a
garage door) is equipped with a rolling code .
.. Program the rolling code as follows:
Acti vating the moto r unit in a system
.. Locate the programming button on the sys­
tem's motor un it. The exact location and
color of the button may vary depend ing o n
the brand of the system.
.,. Press the programming button on the ga­
rage door opene r moto r unit (this will usual ­
ly activate an " indicator" on the motor unit) .
Yo u now have approximate ly
30 second s to
program the b utton in the roof headliner .
Programming the button in the roof
headlin er
.,. Press and hold the previo usly programmed
button in the roof headliner for 2 seconds .
.. To end ro lling code programming , press and
hold the button again for 2 seconds.
.. With some systems, the button may need to
be pressed a third t ime to end the program­
m ing process .
After programm ing, the system sho uld detect
the signal and begin moving when the button
in the roof headliner is pressed . Now you may
program the other buttons as needed .
(D Tips
-The rolling code can be programmed
more quickly and more easily with the
help of a second person.
- If you have difficulty programming the
roll ing code, referr ing to the user guide
for the system may help .

M N
er
u..
co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
No. Consumer
A/C system pressure sensor,
electromechanical parking
brake, Homelink, automatic
3 dimming interior rear view
m
irror, air quality/outside
air sensor, Electronic Stab ili-
zation Control (button)
5 Sound
actuator
6 Headlight
range cont rol/
head light (cornering light)
7 Headlight (corner
ing light)
Contro l modu les (e lectro-
8 mechanical parking brake,
shock absorber, quattro
sport), DCDC converter
9 Adaptive cru ise contro l
10 Shift gate/clutch
sensor
1 1 Side ass ist
1 2 Headlight range
control,
park ing system
13 Airbag
14 Rear wiper (allroad)
1 5 Auxi
liary fuse (instrument
pane l)
16 Aux
iliary fuse terminal 15
(engine area)
Fuse p anel @ (brown )
No. Con sumer
2 Brake light sensor
3 Fuel
pump
4 Clutc h sensor
5 Left
seat heating with/w ith-
out seat vent ilation
6 Electronic Stab
il iz at ion Con-
tro l (e lectric)
7 Horn
Front left door (window reg-
8 ulator, centra
l locking, mir-
ror, switch, lighting)
9 Winds hield wipe r motor
1 0 Electronic
Stabilizat ion Con-
trol (valves)
Fuses and bulb s 251
Amp s No. Consumer Amps
•
Two-door models: rear left
• window regulator; Four-
11 door models:
rear left door
30
5 (window regulator, central
lock
ing, switch, lighting)
12 Rain and light sensor
5
5
Fuse pan el© (r e d )
5/7,5 No . Consumer Amps
3 Lumbar support 10
7,5 4 Dynamic steering 35
s Interior lighting (Cabriolet)
5
5 6 W
indshield washer system,
35
h eadlight washe r system
5 7 Vehicle electrical
system
20
control module 1
5
5
8
Vehicle e lectr ica l system
30
control module 1
5 9 Left rear window regulator
7,5/20
motor (Cabriolet)/sunroof
5
15 10 Vehicle e
lectrical system
30
control module 1
10 11 R
ight rea r window regulato r
7,5/20
(Cabriolet)/sun shade motor
40 12 Anti-theft
alarm warning
5
system
Amps
5
25 5
15/30
5
15
30
30
25

M N
er
u..
co ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Technical Modifications
Our guidelines must be complied with when technical modifications are made .
Always consult an authorized Aud i dealer be ­
fore starting work on any modifications.
This will he lp ensure that vehicle function,
performance and safety are not impaired
¢ .&. .
Attempting to work on electronic components
and the software used with them can cause
malfunctions. Beca use of the way electronic
components are interconnected with each
other, such malfunctions can also have an ad­
verse affect on other systems that are not di ­
rectly involved . Th is means that you r isk both
a substantial reduction in the operational
safety of you r vehicle and an inc reased wea r of
vehi cle parts¢ _&..
Author ized Audi dealers w ill perform th is
wo rk in a professiona l and competent ma nner
or, in spec ial cases, refer you to a p rofessional
company that specializes in such mod ifi ca­
tions .
_& WARNING t= -
Improper repairs and modifications can
change the way vehicle systems wo rk and
cause se rious personal injury.
0 Note
If emergency repairs must be perfo rmed
elsewhere, have the ve hicle examined by
an authorized A udi dealer as soon as possi­
ble.
Con sumer In formation 267
Declaration of
Compliance, Telecom­
munications and
Electronic Systems
Radio Frequency Devices and Radiocommuni­
cation Equipment User Manual Notice.
The manufact urer is not responsib le for any
radio or TV interference caused by unauthor­
ized modifications to this equipment.
Device s
The following devices each comply wi th FCC
Part 15 .19, FCC Part 15.2 1 and RSS -Gen Iss ue
1:
- Adaptive cr uise con trol*
- Conven ience key*
- Side assist*
- Cell phone package*
- Electron ic immobilizer
- Homelink universa l remote control *
- Remote control key
FCC Part 15.19
Th is device complies with part 15 of the FCC
Ru les . Operation is subject to the fo llow ing
t wo conditions:
(1) This device may not cause harmful i nter ­
ference, and
(2) this device must accept any interference
received, including interference that may
cause undes ired operation .
FCC Part 15 .21
CAUTION:
Changes or mod ificat ions no t expressly ap ­
proved by the pa rty responsible fo r compli­
ance could void the user's aut hority to operate
the eq uipment .
RSS-Gen Issue 1
Operation is sub ject to the fo llow ing two con­
di tions :
(1) this device may not ca use inte rference,
and
•
•