2015 AUDI R8 SPYDER start stop button

.... N
l'­
N "1: .... I.O
"' N
"' ....
Instruments and warn ing /indicator lights
Tachometer (engine rev counter )
The tachometer indicates the engine RPM (revo­
lutions per minutes).
If engine RPM drops below 1,500, you should
downshift to the next lower gear. The red area at
the end of the scale indicates max imum permis­
sible eng ine RPM after the break-in period . Be­
fore reach ing th is area, move the selector lever to
position "A (Automatic ope rat ion)" or ease your
foot off the accelerator pedal.
(D Note
The tachometer needle should only br iefly be
in the red zone: you could damage your en­
gine! The beginning of the red zone varies de­
pending on the engine.
@) For the sake of the environment
Upshift ing early saves fuel and reduces eng ine
noise.
Digital clock with date display
Your vehicle is equipped with a quartz controlled
digital clock.
Fig. 4 In str um ent cluster w ith the digital clock
To set the hour
.. Pull the knob (hour display flashes) and turn it
to the left or right.
To set the minutes
.. Pull the knob as many times as necessary until
the minute display flashes .
.. Turn the knob to the left or right.
To set the date
.. Pull the knob as many times as necessary until
the day, month or year display flashes.
.. Turn the knob to the left or right.
To hide or display the date
"' Pull the knob as many times as necessary until
the date dis play flashes.
"' Tur n the knob to the left or right.
When the date d isplay stops blinking, this means
the time and date have been successfully stored .
With the ignition off, pushing or pu lling the Set/
Check button
¢ page 8, fig . 3 Q) can turn on the
display field lighting for a few seconds.
Engine coolant temperature gauge
The engine coolant gauge¢ page 8, fig. 3@ only
works when the ignition is on. To prevent damage
to yo ur engi ne, please note the following impor­
tant points .
Engine cold
As long as the needle remains at the bottom of
the ga uge, the engine still has not reached its op­
erating temperature. Avoid high engine speeds,
heavy engine loads and heavy throttle.
Normal temperature
When the engine has reached its operating tem­
perature, the needle will move into the midd le of
the gauge and remain there.
If the engine is
working hard at high outside temperatures, the
need le may t urn further to the right. This is no
cause for concern as long as the. warning light
in the instrument cluster does not illuminate.
When the. warning light starts to flash, this
can mean one of two things: either the coolant
temperature is too high, or the coolant level is
too low¢
page 14.
A WARNING
-
-Always observe the warn ing in¢ page 155,
Working in the engine compartment
before
open ing the engine compartment lid and
checking the engine coolant level. ""
9

.... N
l'­
N "1: .... I.O
"' N
"' ....
Lap timer
Introduction
You can record and evaluate lap times with the
lap timer in the display¢
page 25, fig. 17. The
time is measured in minutes, seconds and 1/10
seconds. The hours are also shown when the lap
time exceeds
60 minutes . The maximum individ­
ua l measurement is
99 hours.
A WARNING
Please devote your full attention to driving.
As the driver, you have complete responsib ili­
ty for safety in traffic. Only use the functions
in such a way that you always ma inta in com­
plete control over your vehicle in all traffic sit­
uations.
0) Tips
When the lap t imer stopwatch is running, you
can call up the trip computer information
w ith the
! RESET I button.
Calling up the lap timer and timing
A ppl ies to vehicles: with la p t ime r
'---- ®
Fig. 16 Controls
Fig. 17 D isplay: Lap timer
Driver inform atio n sy stem
Calling up the lap timer
.,. Press the I RESET !¢ fig. 16 @ button until the
lap timer ¢
fig. 17 appears.
Timing laps
"' To start timing, press the upper section of the
w iper sw itch @. The time meas urement is
shown in line(!)¢
fig. 17.
.,. To stop timing, press the upper section of the
wiper switch @again. This a lso starts timing
the next round. The previous time moves one
line up, first to line @and then to line@. Line
@ shows the current lap number, for example
LAP 5.
Di splaying inte rm ed iat e time and pau sing
timing
"' To display an intermediate time, press the low­
er section of the wiper switch@. The inter­
mediate time appears in line(!) and is marked
w ith *.
"' To pause timing, press the lowe r section of the
w iper sw itch @again.
"' To conti nue tim ing, press the uppe r section of
t he wiper swi tch @ .
If timing is paused, you can continue it later even
if you sw itch the igni tion off.
Evaluating times and continuing or
resetting timing
You can evaluate the fastest, slowest and aver ­
age lap times.
LAP 5
+ 45:12 .9
59:08.8
9J 51:10.8
F ig. 18 Display: lap time evaluat ion
"' To evaluate lap times, press and ho ld the
IRESE TI ¢ page 25, fig . 16 @ button for ap-
proximately 2 seconds. The display shows the
Iii>
25

.... N
l'­
N "1: .... I.O
"' N
"' ....
on the vehicle to make sure it is properly
l ocked.
- Do not use the remote control if you are in­
side the car, otherwise you may unintention­
ally lock the vehicle, and then you would set
off the ant i-theft a larm when you try to
start the engine or open a door . In case this
happens anyhow, push the unlock button©.
- Use the panic funct ion only if you are in an
emergency situa tion.
Resetting the remote control
The remote control must be reset if the vehicle
does no t unlock .
.. Press the unlock button 0 on the remote con­
trol.
.. Manually unlock the driver's door lock with the
mechan ical key wi thin 30 se cond s.
.. Press e ither the lock-
{fl or the unlock CD button
to comple te the reset sequence .
Operating locks with the key
To lock and unlock the vehicle from the outside ,
turn the key in the lock of the driver's door .
Fig. 24 Key turn s for op ening and closin g
.. To un lock the vehicle, tu rn t he key to the open ­
ing position @¢
fig. 24 .
.. To lock the vehicle , turn the key in the lock of
the driver's door to the lock position @
c:> .&_.
A WARNING
Always read and heed WARNING c> A in Gen­
eral description on page 29 .
Opening and clo sing
Locking and unlocking the vehicle from
inside
The vehicle can be locked or unlocked from the
inside using the power locking swi tch .
Fig . 2 5 Sect ion fro m drive r's door : Powe r loc king switc h
.. Press the upper part of the powe r lock ing
sw itch@ to lock the vehicle ¢,&. .
.,. Press lower part o f the sw itch@ to unlo ck the
veh icle .
If you lock the veh icle using the power locking
switch, p lease no te t he following:
- You cannot open the doors from the
outside
(increased security, for examp le when you are
stopped at a red light) .
- The LED in the switch~ lights up when all the
doors and the front lid a re closed and locked.
- Yo u can un lock and open the doors from the in­
side by pulling on the door hand le .
- You ca nnot lock the ve hicle w it h the central
locking switch when the d river's door is open .
- If you have a crash and the airbag is activated,
the doors a utomatically unlock.
A WARNING
-
- If you use the power loc king switch with the
doors closed, remember that all the veh icle
doors w ill lock.
- Locked doors make it more difficult for
emergency workers to get into the veh icle,
which puts lives at r isk. Do not leave anyone
behind in the vehicle, especially children .
31

On the road
- The engine cannot be started by pushing or
towing the vehicle .
@I For the sake of the environment
To avoid unnecessary eng ine wear and to re­
duce exhaust emissions , do not let your vehi ­
cle stand and warm up. Be ready to drive
off
immediately after starting your vehicle.
Stopping the engine
On vehicle s wi th S tron ic*, the engine can be
turned
off in the neutral position N and in each
gear (1 -7 and R) .
.. Tu rn the ignition key to posit ion (!) co
page 66,
fig. 77 .
A WARNING
- Never turn off the engine until the vehicle
has come to a complete stop .
- The brake booster and servotronic only work
when the eng ine is running . W ith the igni ­
t ion turned
off , you have to apply more force
when steering or braking. Since you cannot
steer and stop normally , this can lead to ac­
c idents and serious injuries .
(D Note
-If the engine has been under heavy load for
an extended period of time, heat builds up
i n the eng ine compartment after the engine
i s switched
off -there is a r isk of damag ing
the engine . A llow the engine to continue to
run at id le for a short time or drive until it
has coo led down before you turn it off
q page 73.
-If the engine has been under heavy load for
an extended period of time, it can become
extremely hot . You should not park your ve­
hicle over easily combustible objects or
areas (e .g . grass or leaves) . There is a risk of
starting a fire .
{!) Tips
After the engine has been switched off, the ra­
diator fan can continue to run for up to 10 m i­
nutes - even w ith the ignition switched
off . It
68
can also switch on again after some time if
the coo lant temperature rises as the result of
heat bu ildup or if the engine compartment is
heated by the sun's rays and the engine is hot .
Parking brake
Parking brake
When the parking brake is set, it prevents the ve­
hicle from rolling away unintentionally.
Fig . 78 C ente r co nsol e: Park ing bra ke set
S etting th e pa rking brak e
.. Pull th e parking brake lever all the way up.
Releasing the p arkin g brake
.. Pull the parking brake lever up slightly and
press the release button at the same time
c::> fig . 78 -arrow- .
.. Keep the release button pressed and lower the
parking brak e
q &_.
If you shou ld drive off with the parking bra ke st ill
set, a warning tone will sound and the fo llow ing
message wi ll appear in the instrument cluster to
r e mind you to release the parking brake:
H and brake i s appli ed
T he park ing brake warn ing comes on only after
you have driven for longer than 3 seconds and
faster than 3 mph (5 km/h) .
The parking brake warning ligh t. (USA)/ .
(CON) illuminates whe n the park ing brake is set
and you sw itch on the ign it ion .

.... N
l'­
N "1: .... I.O
"' N
"' ....
To store maximum speed
•Turnoff the ignit ion.
• Briefly press the button in the instrument clus ­
ter
9 page 70, fig. 79. The odometer and the
digital clock are now illuminated.
• Press the button for at least 2 seconds. The cur­
rently stored maximum speed appears in the
display
or the crossed out symbol for warning
threshold 2, if no maximum speed was set pre­
viously.
• Press the function selector sw itch in the wiper
lever @r=>
fig. 80 up or down to change the set
val ue. Values run up or down in steps of 6 mph
(10 km/h).
To delete maximum speed
•Turnoff the ignition .
• Briefly press the button in the instrument clus­
ter
9 page 70, fig. 79 . The odometer and the
digital clock are now illum inated.
• Press the button for at least 2 seconds. The cur­
rently stored maximum speed appears in the
display.
• Press the
iRESETI button in the wiper lever @
r:=> fig. 80 until the crossed out speed warning
symbol for warning threshold 2 appears in the
display.
A few seconds after the adjustment is completed,
the illumination for the odometer and the digital
clock w ill go out.
@ Tips
This warning threshold can also be controlled
through the trip computer
r=> page 23, Navi­
gating the menu.
On the road
Cruise control
Switching the system on
The cruise control system makes it possible to
drive at a constant speed starting at 20 mph (30kmlh).
Fig. 81 Contro l lever with set button
• Pull the lever to position (Dr=> fig . 81 to switch
the system on .
• Drive at the speed you wish to set.
• Press button @to set that speed.
The display may vary depending on the type of
display in your vehicle. The indicator light
(lj;jl)~i~ (US model)/ . (Canadian model) will al­
so light up in the instrument cluster.
A WARNING
--
-Always pay attention to traffic even when
the cruise control is switched on. You are al­
ways responsible for your speed and the dis­
tance between your veh icle and other
veh icles.
- For safety reasons, the cruise control should
not be used in the city, in stop-and -go traf­
fic, on twisting roads and when road condi­
tions are poor (such as ice, fog, gravel,
heavy rain and hydroplaning) -risk of acci­
dent .
- T urn off the cruise control temporarily when
entering turn lanes, highway exit lanes or in
construction zones.
- Please note that inadvertently "resting"
your foot on the accelerator pedal causes
the cruise control not to brake. This is be­
cause the cruise control is overridden by the
driver's acce lerat ion.
71

Transmission
Transmission Manual transmission
Gearshift lever
Applies to vehicles: with manua l transmission
The clutch pedal must be depressed all the way
before you can start the engine .
The manual transmission in your Audi is equipped
with an
interlock-feature.
• Depress the clutch pedal all the way.
• Start the engine with the gearshift lever in Neu­
tral and the clutch pedal depressed.
(D Note
Always depress the clutch pedal fully when
changing gears. Do not hold the vehicle on a
hill with the clutch pedal partially depressed.
This may cause premature clutch wear or
damage.
(D Tips
- Resting your hand on the gearshift lever
knob while driving will cause premature
wear in the transmission.
- The back-up lights go on when you shift into
Reverse with the ignition on.
Gearshift pattern (6-speed manual
transmission)
App lies to vehicles: with 6-speed manual transmission
Fig. 83 Gearshift pattern: 6-speed manual transm iss ion
Drive in 6th gear for optimum fuel economy
when cruising. However, if more acceleration is
required (when passing, for examp le), sh ift
down.
74
Engaging reverse gear (R)
• Move the shift lever all the way to the left,
press it down, then push it backward.
Especially after driving forward, stop the vehicle
completely, shift into
Neutral and rest the shift
l ever briefly in Neutral before shifting into
Re­
verse.
Launch Control Program
Applies to vehicles : wit h VlO engin e and manual t ra nsmissio n
The Launch Control Program enables maximum
acceleration.
Requirement: The engine must be at operat ing
temperature and the steering wheel must not be
turned.
• With the engine running, press the button
l:fil
one time. The ESC indicator light II in the
Dr iver Informat ion System display illum inat es
and the message
ESC sport -Warning! Re­
stricted stability appears .
• Press the clutch and hold it down.
• Engage the first gear.
• Press the accelerator pedal all the way down
until the engine speed remains steady at 6500
RPM .
• Release the clutch carefully~,&. .
A WARNING
- Always adapt your driving to the traffic flow.
- Only use Launch Control when road and traf-
fic conditions allow it and other drivers will
not be endange red or annoyed by your driv­
ing and the vehicle's acceleration .
- Please note that the driving wheels can spin
and the vehicle can break away when ESC is
sw itched off, especially when the road is
slippery .
- Once you have accelerated, you should
switch the ESC back on by pressing the but­
ton
00 .
(D Tips
- When accelerating using the Launch Control
program, all vehicle parts are subject to .,..

Parking system
Parallel parking
Applies to vehicles: with parking system advanced
Use parking mode 2 to help you parallel park
along the side of a street.
Fig . 97 Na vigation system d isplay : Blue sur face aligned
wit h parking spot
0
-
Fig. 98 Navigatio n system display: The blue cu rved line
contacting the curb
The following steps app ly only when there is no
obstacle such as a wall near the parking spot.
Otherwise, please read the information provided
in the "Parking Next to Obstacles" section .
• Activate the turn signal.
• Position your vehicle parallel to the edge of the
street, approximately 3 ft . (1 m) from a parked
vehicle.
" Switch the navigation system and the naviga­
tion system display on .
• Se lect reverse gear. The parking aid t urns on
and parki ng mode 1 appears on the display.
• Press the control button
1 on the navigat ion
system
9fig . 97. Parking mode 2 appears.
•B ackup and align your vehicle so the blue area
@ borde rs on the rear end of the vehicle or on
the parking spot line. The blue area represents
an extension of the vehicle's outline by approxi­
mately 16 ft (5 meters) to the rear. The long
84
side o f the b lue area should be on the curb . The
entire blue area must fit into the parking spot .
"W ith the vehicle stopped, turn the steering
wheel to the right as far as it will go.
• Back into the parking spot until the blue curve
touches the curb
9 fig . 98. Stop the veh icle .
" With the vehicle stopped, turn the steering
wheel to the left as far as it wi ll go .
• Con tinue to back into the parking spot until the
veh icle is parked parallel to the curb .@ marks
the rear bumper. Stop the vehicle when the red
orientation line@ borders an object
9 ,&.
Keep an eye on the front of yo ur vehicle while
doing this
c> (D.
Parking next to obstacles
When there is an obstacle (such as a wall) next to
the parking spot, choose a spot with more space
on the sides . Position the long side of the blue
area so that there is sufficient space from the
curb. The area must not be on the curb . You will
also need to start turning the steering wheel
much earlier. There should be a sufficient amoun t
of space between the curb and the blue curve,
and the blue curve¢
fig. 98 must not touch the
cu rb.
_& WARNING
- The rearview camera does not show the en­
tire area behind the vehicle
c> page 80,
fig .
92. Watch out especially for small chil­
dren and animals. Th e rear view camera can­
not a lways detect them, posing risk of an
accident!
- Please note that objects not touching the
ground can appear to be farther away than
they really are (for example, the bumper of
a vehicle or the rear of a truck). In this case,
you should not use the orientation lines to
he lp with parking, wh ich poses danger of an
accident!
(D Note
In the navigation system disp lay, the direction
of travel of the vehicle rear is represented de­
pending on the steering wheel angle. The ve­
hicl e front swings out more than the vehicle
rear . Maintain plenty of distance so that your
lllJ,,