2015 AUDI R8 SPYDER light

Convertible top
Convertible top
Convertible top
General information
The fabr ic conv ert ible top opens and closes auto­
matica lly. W hen it is open, it is sto red in t he con­
ver tible top storage bay. The convert ible top may
be opened or closed at speeds up to 31 mph
(SO km/h).
T he conve rtible top is wind- and wate rproof un­
de r n orma l conditions. Some mois ture may co l­
lec t in the vehicle interior, but on ly unde r ex ­
tremely adverse weathe r co ndit ions such as tor­
rentia l rain . That is normal and no cause for con­
cern.
F ollow t he clean ing and maintenance instr uc­
tions ~
page 145 to ensu re the convertib le to p
remains wind- an d waterproof. A lso note the fol ­
lowing points:
- Only stow the convertib le top when i t is clean
and dry. Gra ins of sand or coa rse dirt particles
can cause abrasions on the convertible top
when stowed that can lead to damage to the
fabric over time. Stowing the convertible top
whe n it is damp can cause marks or pe rmanent
mildew spots to form .
- Do not leave the convertible top open for sever­
al weeks or the c reases in it may become discol ­
ored . Th i s is especially tr ue if the top was stow­
ed when damp .
- Remove ice and snow befo re ope ning the con­
vertib le top . Do not use any sharp edged ob­
jects to remove ice and snow or t he conve rtible
t op co ul d be scra tch ed o r dam aged . T he rear
window may be cleare d wi th a stand ard i ce
scra per.
- T he fab ric in the co nver tib le top lose s elasticity
in su b-zero tem pera tures . We recommend not
opening or closi ng the convertib le top when the
temperature is below 32 °F (0 QC). T he conver­
tible top will not open when the temperature is
S °F (-15 QC) or below.
38
Opening /closing the convertible top
Fi g. 35 Cente r console : co nve rtible top sw itc h
Req uirement: the front lid must be closed and
t h e ign it io n m ust be switched on.
Opening the convertible top
.,. Pull and ho ld the co nvertib le top switch until
the top is stowed in the bay and the cover on
the bay has closed complete ly.
Opening the convertible top using the one­
touch function
.,. Pull the sw itch br iefly to open the convertib le
top comp lete ly. It is not necessary to ho ld the
sw itch . The one-touch funct ion is only avai lab le
at speeds between 4 and 31 mph (6 and
SO km/h) .
Closing the convertible top
.,. Press and hold the sw itch until the convertib le
top is closed a nd the latch is locked.
The ind icator lighr
fi in the instrument cl uster
goes out when the top is comp lete ly open or
closed .
The side windows a utomatica lly lower slightly
during the opening/closing process.
A WARNING
- Never drive when the convert ible top is not
locked correctly. The w ind generated by driv­
ing could cause it to open, which could in­
jure v ehicle occupants or damage t he ve hi-
c~ . ~

Convertible top
Wind deflector
The wind deflector reduces turbulence in the pas­
senger compartment and makes driving more
comfortable.
F ig. 36 Install ing the wi nd de flector
Fig. 37 Luggage compartment: stori ng t he w ind deflector
The wind deflector is loca ted in the luggage com­
pa rtment . Insta lling it from the side of the vehi­
cle that is farthest from traffic is recommended
for safety reasons. Follow the insta llation in­
structions provided in the storage bag.
Install ing /re moving th e wind d efl ector
.. To install the wind deflec tor, slide the re taining
pin @into the mount@<=>
fig. 36 . The wind
deflector is secure when it clicks into place and
the red marks on both buttons are no longer
visible .
.. To
remove the wind deflector, press both but­
tons © and pull the deflector upward.
Stori ng the wind defl ect or
.. Slide the wind deflector into the storage bag
with the retaining pins facing downward .
.. Hang the storage bag on the retainers @in the
luggage compartment <=>
fig. 3 7.
40
A WARNING
- Do not use the w ind deflector to secure car­
go or other objects . Th is could resu lt in in­
jury .
- Be ca reful of traffic when install ing the wind
deflector.
(D Note
To prevent damage to the vehicle paint, do not lean on the vehicle when installing the
wind deflector. Objects such as belt buckles
could scratch the surface of the pa int .
@ Tips
-Keeping both side windows raised provides
the best w ind protection .
- To prevent mildew, do not store the wind deflector when it is damp.
Rear window
Fig . 38 Rea r w indow in w ind de flector pos ition
Fig . 39 Section of t he ce nter conso le : co nvert ibl e top
sw it c h
The rear window can be extended slightly when
the convertible top is open to reduce a ir
move­
ment inside the vehicle and increase comfort .

.... N
l'­
N "1: .... I.O
"' N
"' ....
,&_ WARNING
-
Make sure the convertible top is locked cor­
rectly. Otherwise the wind from driving could
cause the convertible top to open. This can re­
sult in injuries and damage to the vehicle.
Step 7: Secure the fins on the body
Fig. 52 Convertib le top: pressing the fi ns downward
Fig. 53 Interior: tightening the bolt
The following steps must be performed on both
sides of the vehicle.
"'Press the fin downward firmly
9 fig. 52.
"'Hold the fin in this position and tighten the
bolt above the seat belt -arrow-using the Allen
wrench from the vehicle tool kit at the same
time
¢fig. 53.
A second person should assist when securing the fins to the body. Tightening the bolts is much
easier if a second person presses the fins down.
A WARNING
Make sure the fins lie on the body. Otherwise
the convertible top will not lock securely and
it could open while driving. This can result in
injuries and damage to the vehicle .
Convertible top
Step 8: Extend the rear window
Fig. 54 Upper storage compartment between the seat
backrests: extending the rear window
"' Press the Allen wrench from the vehicle tool kit
firmly into the opening until it clicks into place
9fig. 54.
"'Turn the bolt counterclockwise until the rear
window is extended. Press the rear window
back lightly while doing this.
(D Note
To prevent damage to the vehicle, make sure
the rear window is in the guide in the conver­
tible top when extending the window and the
fins are secured on the body.
45

Clear vision
Clear vision Lights
Switching the headlights on/off
F ig. 55 Inst rument pane l: ligh t switch (automatic head ­
and taill ig ht control)
Switching on the side marker lights
"'T urn the light switch to :oo:.
Switching on the headlights and high beam
"'Turn the light switch to io.
"'Push the high beam lever forward towards the
instrument panel~
page 47.
Switching off the lights
"'Turn the light switch to 0.
Switching on automatic head- and taillight
control
"'Turn the light switch to AUTO ~ fig. 55.
The headlights and taillights will come on auto­
matica lly when the ignition is switched on and
the light switch is in the position AUTO (on ly in
nighttime conditions). When switching
off the ig­
nition, the headlights will go
off and only the
side marker lights will remain lit.
Daytime running lights
USA models: The daytime running lights will
come on automatica lly when the ign ition is
sw itched on and the light switch is in the position
AUTO (only in daylight conditions).
Canada models: The daytime running lights will
come on automatica lly when the ign ition is
sw itched on and the light switch is in the position
0, AUTO (only in daylight condit ions) or :oo;.
46
Automatic head- and taillight control
In the switch position AUTO the automatic head­
and taillight contro l is activated . Light sensors
are located in the ins ide mirror housing and con­
stantly check the light conditions surrounding
the vehicle. If ambient brightness falls below a
factory set value (e.g. when driving into a tun­
nel), the head- and taill ights including the li­
cense plate illumination are automatically turned
on . When ambient brightness increases again,
the externa l lights are turned
off again~,& . In
the switch position
AUTO , the low beams are
turned
off when the ignition is switched off. The
remaining lights are turned
off when the key is
taken o ut of the ignition lock .
With automatic head-and taillight control, the
high-beam function is also available, but with
one restriction: If you have not switched the high
beams back to low beams during automatic
headlight operation (for example, after driving
through a tunne l), only the low beams come on
the next time automatic headlights are switched
on . To use the high beams, you first have to pull
the h igh beam lever back and then push the lever
forward again.
The side marker lights and headlights can be
switched on manually by turn ing the light sw itch
to the des ired pos it ion .
Light sensor malfunction
If there is a light sensor ma lfunction, the symbol
El comes on in the display. For safety reasons,
the low beams are turned on permanently with
the sw itch in
AUTO. H owever, you can continue to
turn the lights on and
off using the light sw itch.
Have the light sensor checked as soon as possible
at an authorized Audi dealer .
Coming home/leaving home function
The function is sw itched on when the sw itch is in
the
AUTO pos ition and the function is shown as
active in the driver information system.
The
coming home function illuminates the area
around t he vehicle when the igni tion is switched
off and the driver's door is opened. The length of
time the lights rema in on can be set in the menu
display
( Lights > Exterior lights > coming home ). IJJ,,

.... N
l'­
N "1: .... I.O
"' N
"' ....
The leavin g home function i lluminates the area
around the vehicle when un locking it .
A WARNING
-Never use daytime running lights to see
where you are going. They are not bright enough and w ill not let you see far enough
ahead for safety, especially at dusk or when it is dark . Be aware of changes in outside
light cond itions when you are dr iv ing and re·
spond by switching on your low beams.
- Automatic head· and taillight control is only
intended to assist the d river. This feature
does not relieve the driver of his responsibi l­
ity to check t he headlights a nd to turn t hem
on manually according to the cur rent lig ht
and visibility conditions. For example, fog
and rain cannot be detected by the light
sensors. Consequent ly, always switch the
headlights on under these weather cond i·
tions and when dr iv ing in the da rk.
- Crashes can happen when yo u cannot see
the road ahead and when you cannot be
seen by other motorists.
- Always turn on the headlights so that you
can see ahead and so that others can see
your car from the back.
- Please observe lega l regulations when using
the light ing systems described .
@ Tips
-Always observe the specific local regulations
for your area when to use your lights.
- Turn on low beams as evening app roaches
or in conditions of poor visib ility.
- Do not attach stickers to the windshie ld in
front of the sensors as this can disab le the
automat ic head- and taill ight control and
the automatic glare-dimming of the rear·
v iew mirror(s) *.
- If you remove the ignit ion from the ign it ion
lock while the headlights are still on, a buz­
zer w ill sound as long as the dr iver's door is
open to remind you to t urn off the lights .
- In the AUTO mode, the low beams are
turned off when the ignition is t urned off.
The remaining lights ar e turned off when
t h e key is taken ou t of the ignition.
Cle ar vi sion
-In cool or damp weather conditions the
head lights may fog
over temporarily on the
inside .
- The c ritical factor is the temperature dif­
ference between the inter io r and the exte·
rior of the hea dlight lens .
- W ith the mai n beams switched on, the
lig ht-em itting area w ill be free of conden­
sation after a short time, however the
e d ges of the glass may still be fogged.
- This physical phenomeno n has no effect
on the life of your veh icle's lighti ng sys ­
tem .
Turn signals and high beam lever
The lever on the left side of the steering column
is used to operate the turn signals and the high
beam as well as the headlight flasher.
t
t
Fig . 56 Turn signal and high bea m leve r
The turn signa l and high beam lever has the fo l­
lowing functions :
Turn signal s¢¢ ©@
.,. Push the lever up as far as it can go to t urn on
the right turn signa l or down to turn on the left
turn signal
q fig. 56.
.,. Move the lever br iefly u ntil you meet res istance
and re lease it to flash three times.
.,. Move the lever (up or down) until you meet re­
sistance and hold it there to determine the
flash ing time fo r the turn signa ls .
High beam ~D @
.,. Push the lever forward to sw itch on the h igh
beam.
.,. Pull the lever back towards yo u to switch off
the high beam.
47

Clear vision
Headlight flasher ~D ©
.. Pull the lever toward the stee ring wheel to use
the headlight flasher.
Notes on these features
- The turn signals only work with the ignit ion
switched on. The ind icator lights
M or Ip] in
the instr ument cluster
q page 11 also b lin k.
- After you have turned a corner, the tur n signal
switches off automat ica lly.
- The
high beam works only when the headlights
a re on. The ind icator light
II i n the instrument
cluster illuminates when the high beams are
o n.
- The
headlight flasher wo rks only as long as you
ho ld the lever - even if the re are no lights
turned on. The indicator light
II in the instru­
ment cluster illum inates when yo u use the
headlight flasher .
A WARNING
Do not use the high beam or headlight flasher
if you know that these could b lind oncom ing
traffic.
Emergency flasher
The emergency flasher makes other motorists
aware that you or your vehicle are in an emer­
gency situation.
SPORT •
Fig . 57 Cente r co nso le : em erge ncy flasher sw itc h
• Press the switch~ q fig. 5 7 to switch the
emergency flasher on or off.
When the emergency flasher is on, a ll four turn
sig nals blink at the same time. The tu rn s ignal in­
d icator lights
B II in the instrumen t cl uste r, as
well as t he lig ht in the emergency f lasher switch
48
~ b link likewise. The emergency flas hers also
work when the ignition is turned off .
The emergency flasher will automatically switch
on if you a re in an acciden t w here the a irbag has
deployed .
{I) Tips
You should sw itch on the emerge ncy flashe r
when:
- you a re the las t veh icle standing in a t raff ic
jam so th at any other vehicle s com ing can
see you, or when
- yo ur vehicle has b roken dow n or y ou are in
an eme rgency s itu ation, or whe n
- yo ur vehicle is be ing towed by a tow tru ck or
i f yo u a re towin g ano th er vehicle behind
yo u.
Interior Lights
Interior lights
The interior lights include the reading lights for
the driver and the front passenger .
Fig. 58 Sect ion from headliner: Interior lights
Activating door contact circuit
• Press the button @. The LED in the b utton illu­
m inates.
Deact ivating door cont act circuit
• Press th e button @. The LED in the button goes
out .
Front r eading light s «~
.. Press one of the switches® to turn the right or
left reading light on/off. ..,.

.... N
l'­
N "1: .... I.O
"' N
"' ....
With the door contact circuit, the interior lights
turn on as soon as you unlock the veh icl e or open
the doors . The interior lights are also turned on
when the ignition key is removed . The lights turn
off about 30 seconds afte r the doors are closed .
When the veh icle is locked or when the ignition is
turned o n, the inter ior lights are turned off .
When a door is open , the interior lights are
turned off after about 10 m inutes to preven t bat­
tery draining .
T he brightness of the lights is controlled a uto­
mat ica lly by a d immer when they a re sw itched
on/off.
Instrument panel illumination
T he illumination of the instruments, displays
and the center console can be adjusted .
Fig . 59 In strument pa nel ill uminatio n
You regulate the brightnes s of the ins truments
with the left th umbwhee l
C:1 i::;,fig. 59.
Ign ition ON , light switch at @
With the ignition switched ON, the glow of in ­
strument needles
can be adjusted to appear
brighter or d immer .
Ignition ON , light switch at :oo~ or tD .
With the lights sw itched on, the brightness of in­
strument cluster (i.e. needles, gauges and dis­
plays) a nd center console il lum ination ca n be ad ­
justed .
(D Note
The instrument cluster and center console il­
lum inat io n (gauges and needles) comes on
when you sw itch on the ig nitio n and the
ve hi-
Cle ar vi sion
cle headlight s are off . Be aware of the fo llow ­
ing difference between models b uilt to US or
Canadian specif ications:
- USA models: ill umination of the i nstr ument
cl uster (gauges and need les) , dash and cen­
ter console around the gearsh ift lever is
controlled by a light sensor located in the
instrument panel. The instrume nt pane l il­
lum ination w ill automatically become
dimme r as the daylight fades away and
eventua lly will go out comp letely when out­
side light is very low . Thi s is to rem ind you,
t he driver, to switch on t he headlights be­
fore it gets too dark .
- Cana da model s: instrument panel illumina­
t ion will s tay bright regar dless o f the inten­
si ty of ambien t light . Always be aware o f
changes in outside lig ht conditions while
you are driving. Respond in t ime to fading
daylight by turning the light sw itch to posi­
tion ~D (or "AUTO" if your car is equipped
w ith this feat ure) to turn on your head­
lights .
Luggage compartment light
The light is located on the right side of the lug­
gage compa rtment .
These lights come on automatically when the
front lid is opened . The lights turn off automati­
c a lly if the lid is left o pen fo r more then 10 mi­
nutes .
Vision
Adjusting the exterior mirrors
Fig. 60 Forward sect io n of driver 's armrest: pow er mirr or
con trol s ...
49

Clear vision
Turn the knob to the desired position :
Q/P -In this position, you can adjust the driv­
er's and front passenger 's exterior mirrors by
turning the knob in the desired direction .
(@ -The mirrors are heated depending on the
outside temperature.
8 - The exterior mirrors fold in*
You are well-advised to fold the exterior mirrors in when maneuvering in tight spaces or when
leaving the car parked close to other vehicles.
A WARNING
-
- Curved (i .e. convex) mirror surfaces in­
crease your field of view . Remember that
vehicles or other objects will appear smaller
and farther away than when seen in a flat
mirror. If you use this mirror to est ima te
distances of following vehicles when chang­
ing lanes, you could estimate incorrectly
and cause an accident.
- If th e mirror housing is moved unintent ion­
a lly (for example, wh ile parking your vehi­
cle), then you must first fold the mirror
electrically. Do not readjust the mirror hous­
ing manually. You could damage the motor
which controls the mirror.
- If you wash the vehicle in an automatic car
wash, you must fold the exterior mirrors in
to reduce the risk of damage to the mirrors.
Never fold power folding exterior mirrors*
by hand . Only fold them in and out using
the power controls.
(D Tips
If there should be a malfunction in the elec­
trical system, you can still adjust the exter ior
m irrors by pressing the edge of the mirror .
50
Dimming the mirrors
Fig. 61 Auto matic d immin g rearv iew mirror*
Manual anti-glare adjustment
.. Move the small lever (located on the bottom
edge of the mirror) to the rear .
Automatically dimming mirrors*
.. To dim the rearview m irror and both exterior
mirrors, press the@ button. The diode @
turns on . The rearview and exterior mirrors dim
automatically when light shines on them, for
example from headlights on a vehicle to the
rear.
A WARNING
Electrolyte fluid can leak from automatic dim­
ming mirrors if the glass is broken. Electrolyte
fluid can irritate skin, eyes and respiratory
system.
- Repeated or prolonged exposure to electro­
lyte can cause irritat ion to the respiratory
system, especially among people with asth­
ma or other respiratory conditions. Get
fresh air immediately by leaving the vehicle
or, if that is not possible, open windows and
doors all the way.
- If electrolyte gets into the eyes, flush them
thoroughly with large amounts of clean wa­
ter for at least 15 minutes; medical atten­
tion is recommended .
- If electrolyte contacts skin, flush affected
area with clean water for at least 15 mi­
nutes and then wash affected area with
soap and water; medical attention is recom­
mended. Thoroughly wash affected clothing
and shoes before reuse.