-Always follow the instructions provided
by the manufacturer of the child re
straint you intend to install in your vehi
cle .
- Never install a child restraint without a
properly attached top tether strap if the
child restraint manufacturer's instruc
t ions req uire the top tether strap to be
used.
- Improper use of child restra int LATCH
lower anchorage po ints can lead to injury
in a collis ion. The LA TCH lower anchorage
poin ts are des igned to w ithstand only
those loads imposed by correct ly fit ted
child restraints.
- Never mount two chi ld restraint systems
on one LA TCH lower anchorage point .
- Never secure o r attach any l uggage or
other i tem to the LATC H lower anchorag
es .
{i) Tips
-In Canada, the terms "top tether" with
"lowe r universa l anchorages" (or "lower
universa l anchorage bars") are used to
desc ribe the system .
- In ot her countries, the term "ISOFIX" is
u sed to describe the lower anchorages.
Location
F ig. 22 1 Schematic overview : LATCH anc horage point
locations
The ill ustration shows the seating locations in
your vehicle which are equipped with the low-
M "' er anchorages system. 0 ..J
"". rl I.O
"' rl
"' rl
Child S afety 21 7
Description
The lower anchorage positions are marked
for quick locating .
Fig . 222 Second row of seats: lower anchorage bracket
locat ions
F ig . 223 Thir d row of seats: locator buttons for lower
a nch orages
Attachment locato r markers for lower
anchorages
T he lower anchorage locations in the second
row of seats are indicated by the attachment
locator marke rs of the lower anchorage brack
ets¢
fig. 222. Remove the covers to access
the lower anchorage brackets. Circular locator
buttons on the third row of seats" indicate the
lower anchorage locations on the third row of
seats
¢ fig . 223.
L o w er anch orag es
The lower anc horage attachment points are
located between the rear seatback and rear
seat cushion ¢
fig. 222 or¢ fig. 223.
Lower anchorages secure the child restraint in
the seat without using the vehicle's safety
belts. Anchorages provide a secure and easy
to-use attachment and minimize the possibili-
ty of improper child restra int installation. .,..
218 Child S afe ty
A ll child restraints manufactured after Sep
tember 1, 2002, must have lower anchorage
attachments for the
LATCH system.
Remember that the lower anchorage points
are on ly intended for installation and attach
ment of child restraints specifically certified
for use w ith
LATCH l ower anchorages . Child
restra ints that are not equipped with the tow
er anchorage attachments can still be instal led in compliance with the ch ild restra int
manufacturer's instruct ions on using vehicle
safety belts.
A WARNING
Improper use of LATCH lower anchorages
can ca use serio us pe rsonal injury in an ac
cident.
- Always carefully follow the ch ild re
strain ts manufac turer's instruct io ns for
proper installation of the child restraint
and proper use of the lower anchorages
or safety belts in your vehicle .
- Never secure o r attach any l uggage or
ot her items to the
LATCH lower ancho
rages.
- Always read and heed the important in
formation about child restraints in this
chapter and WARNINGS
¢ page 203,
Child Safety.
Guidance fixtures for lower anchorages
Applies to vehicles: with third row seating
Special guidance fixtures increase the conven
ience of the lower anchorages and are availa
ble from your authorized Audi dealer.
F ig . 224 T hir d row of seats: install ing the gu idance fix ·
tures
0
Fig. 225 Close-up: fitting the guidance fixture over the
l ower anchorage bracket
T he lower ancho rage attachment points are
located on the third row of seats between the
seatback and the seat cushion. Special guid
ance fixtures increase the conven ience of the
lower anchorages and help protect the seat
mater ial from possib le damage when instal
ling ch ild restra ints .
Installing the guid anc e fixture s
.,. Push down on the seat cushion so that the
tower anchorages are v is ible.
.,. Hold the guidance fixture with the part
number facing downward and push it in the
d irection of the arrow onto the anchorage
¢fig. 225.
.,. Ma ke sure that each of the two guidance fix
t ures per sea t snaps into place.
Removing the guidance fixtures
.,. Remove the ch ild restra int according the
child restraint manufacture r's instructions .
.,. Push dow n on the seat cushion so that the
lowe r ancho rages are v is ible.
.,. Pull off the gu idance fixtures from the lower
anchorages.
.,. Always remove the guidance f ixt ures and
keep them in a safe p lace when not in use .
You may find it easier to install chi ld re
straints equipped with hooks attached to
straps witho ut the g uidance fixtures in place.
If this is the case, remove the guidance fix
tures by pulling them off the anchorages. However, the guidance fixtures can help you
to locate the
LATCH anchorages . ..,.
M
"' 0 ..J
'
"' rl
"' rl
_& WARNING
Improper use of tether anchorages or low
er anchorages can cause serious personal
injury in a crash.
- Always ca refully follow the child re
straint manufacturer's instruct ions for
proper installation and use of child re
st raint systems.
- Never use the
LATCH or tether anchorag
es to attach safety belts or othe r kinds of
occupant restraints.
- Child restraint tether attachments a nd
lower attachments are only des igned to
se cur e a child res tra int t hat has been
equipped to use these anchorages.
- T ether anc horages and lower an chorages
are desig ned to withstand o nly those
loads imposed by corre ctly fi tted ch ild
res traints . Under no circumstances can
they be used safe ly for adu lt or child
safety belts or harnesses.
- Never mount more than one chi ld re
st raint to a sing le tether or to a lower an
chorage point. Attac hing two child re
straints to a single anchorage point can cause the anchorage to fail and cause se
rious persona l injury in a crash.
(D Note
- Remove the guidance fixtures before
fo ld ing the rear seatback to prevent
damag ing the seat c ushion.
- If you leave the guidance fixtures instal
l ed for several days, they could leave a
mark on the upho lstery on the seat cush
i on and backrest in the area that the
guidance fixtures wer e insta lled. The up
ho ls tery would a lso be permanently
stretched around the guid ance fixtures.
This applies especially to leat her seats.
Child S afety 219
Installing a child restra int with LATCH
lower anchorages
Whenever you install a child restraint always
f o llo w t he child res traint manufa cturer's i n
structions.
F ig . 2 2 6 Lower an cho rages: proper mount ing
Mounting
.. Make s ure the seatback of the rear seat
bench is in the upright pos ition and securely
latched in p lace.
.. Attach both hook-on connectors with the
spring catch release on the child safety seat
onto the LATCH lower anchorage so that the
connecto rs lock into place ¢
fig. 226.
.. Pull on the con nector atta chme nts to ma ke
sure they are properly a ttac hed to the LA T CH
lower ancho rage .
.. Pull straps tight fo llowing the child restraint
manufact ure r's instruct ions .
Releasing
.. loose n the tension on the straps following
t he ch ild restraint manufac turer's instruc
tions .
.. Depress the spring catches to release the
anchorage hooks from t he lower anchorag
es.
Remember: Use te ther s traps to help keep the
chi ld restraint f irmly in place .
A WARNING '-
Imp roper use of the LATCH system can in-
crease the risk of serious personal injury
and death in an accident.
220 Child Safe ty
- These anchors were developed only for
child safety seats us ing the ''LATCH" sys
tem.
- Never attach other child safety seats,
belts or other objects to these anchors.
- Always make sure that you hear a click
when latching the seat in place. If you do
not hear a click the seat is not secure and
cou ld fly forward and hit the interior of
the vehicle, or be ejected from the vehi cle.
A WARNING
Improper insta llation of chi ld restraints
w ill increase the risk of injury in an acc i
dent.
- Always fo llow the child restraint system
ma nufacturer's instructions for proper
installation of the child restraint system
and proper use of tether straps as we ll as
the lower anchorages or safety belts in
yo ur vehicle.
- Always read and heed the important in
format ion and WARNINGS about child
safety and the installation of child re
straint systems ¢
page 203, Child Safe
ty.
Tether anchors and tether straps
Fig. 227 Tether anchors for second row of seats: at
t ac hm ent hook locatio ns
-
Fig. 228 Tet her anchors fo r thir d row of seats: attach
men t hook loca tions
The tether anchors for the three rear seating
positions in the second row of seats are locat
ed underneath the seats in the back
c> fig. 22 7. For vehicles with third row seat
ing*, the tether anchors for the two seating
pos itions in the third row of seats are stored
u nderneath a p lastic cover cap in the floor
¢ fig . 228 .
A tether is a stra ight or V-shaped strap that
attaches the top part of a ch ild restra int to
special anchorage po ints in the vehicle .
The purpose of the tether is to reduce the for
ward movement of the child restraint in a
crash, in order to help reduce the risk of head
injury that could be caused by striking t he ve
hicle inte rior .
Forward facing child restraints manufactured
after September 1, 1999, are required by U.S .
federa l regu lations to comply with new child
head movement perfo rmance requ irements .
T hese new perfo rma nce req uirements make a
tether nece ssary on most new child safety
seats .
,&_ WARNING
-= -Improper installation of child restraints
will increase the risk of injury and death i n
a crash.
- Always follow the instructions provided
by the manufacturer of the child re-
straint you intend to install in your Audi. ..,_
M
"' 0 ..J
"". rl I.O
"' rl
"' rl
-Improper use of child restra int anchors
(incl uding tether anchors) can lead to in
jury in a co llision. The anchors are de
signed to withstand only those loads im
posed by correctly fitted ch ild restraints .
- Never mount two child restraint systems
on one LATCH lower anchor po int.
- Never attach two child restraint systems
to one tether strap or tether anchorage.
- Never attach a tether strap to a tie-down
hook in the luggage compartment.
- Never use ch ild restra int tether ancho
rages to secure safety belts or other
kinds of occupant restra ints.
- Never secure or attach any luggage or
other items to t he LATCH lower ancho
rages or to the tether anchors.
- If a tether or other strap is used to at
tac h a child restraint to the fro nt passen
ger seat, make sure that it is not so
t ight, that it causes the we ight-sensing
mat to measu re mo re weight than is ac
t ual ly on the seat.
- T he heav ier we ight reg iste red can make
the Advanced Airbag System wo rk as
though an adult were on the seat and de ploy the Adva nced Ai rbag when it must
be s uppressed causing serious or even
fatal injury to the child.
- If you must install a rearward facing
child safety seat on the front passenger
seat because of exceptional circ umstan
ces and the
PASSENGER AIR BAG OFF
light does not come on and stay on, im
med iately install the rear-facing child
safety seat in a rear seating posi tion and
have the a irbag system inspected by you r
Audi dealer.
Child S afety 221
Installing the upper tether strap on the
anchorage
Fig . 229 Tet her st rap: prope r rout ing a nd mounti ng
Fi g. 23 0 Tet her st rap fo r seco nd row sea ts: prope r
rou ting and moun tin g
Installing the tether strap
... Release or deploy the tet her strap on the
child res traint accord ing to the child re
st raint manufacture r's ins tructions .
... Guide the upper tether strap
unde r the rear
head restraint and into the rear ca rgo area
(raise the head restraint if necessary).
... Fo r the second row o f seats: Pull the floor
ing back, in order to reach the anchor brack
et
c:::> fig. 230 .
... For the third row of seats:* Remove the
plastic cover cap with a screw drive r, in orde r
to reach the anchor bracket
c:::> page 220,
fig . 228.
.,. Slide the tether strap hook over the anchor
bracket .
... Pull on the tether strap hook so that the
spring catch of the hook engages .
.,. Tighten the tether strap firmly follow ing the
child restraint manufacturer's instructions .
.,. For the se cond r ow of seat s: Push the floor-
ing forward into place again .
1iJJ,,
222 Child Safety
Releasing the tether strap
.. Loosen the tension following the child re
straint manufacturer's instructions.
.. Depress the spring catch on the hook and re
lease it from the anchorage.
.. For the second row of seats: Push the floor
ing forward into place again.
.. For the third row of seats:* Replace the
plastic cover cap .
(D Note
If you leave the child restraint with the
tether strap firmly installed for several
days, this could leave a mark on the up
holstery on the seat cushion and backrest
in the area where the tether strap was in
stalled. The upholstery would also be per
manently stretched around the tether
strap. This applies especially to leather
seats.
Using tether straps on rearward-facing
child restraints
Currently , few rear -facing child restraint sys
tems come with a tether . Please read and
heed the child restraint system manufactur
er's instructions carefully to determine how to
properly install the tether.
& WARNING
A child in a rearward-facing child safety
seat installed on the front passenger seat
will be seriously injured and can be killed if
the front airbag inflates - even with an Ad
vanced Airbag System.
- The inflating airbag will hit the child safety seat or infant carrier with great
force and will smash the child safety seat and child against the backrest, center
armrest, or door .
- A tight tether or other strap on a rear
ward-facing child restraint attached to
the front passenger seat can put too much pressure on the weight-mat in the
seat and register a heavier weight in the
Advanced Airbag System. The heavier weight
registered can make the system
work as though an adult were on the seat
and deploy the Advanced Airbag when it
must be suppressed causing serious or
even fatal injury to the child.
- If you must install a rearward facing
child safety seat on the front passenger
seat because of exceptional circumstan
ces and the
PASSENGER AIR BAG OFF
light does not come on and stay on, im
mediately install the rear-facing child
safety seat in a rear seating position and
have the airbag system inspected by your
Audi dealer.
Additional Information
Sources of information about child
restraints and their use
There are a number of sources of additional
information about child restraint selection, in
stallation and use:
NHTSA advises that the best child safety seat
is the one that fits your child and fits in your
vehicle, and that you will use correctly and
consistently.
Try before you buy!
U.S National Highway Traffic Safety Admin
istration
Tel.: 1-888-327-4236 (TIY: 1-800-424-9153)
http://www.nhtsa.gov
National SAFE KIDS Campaign
Tel.: (202) 662-0600
http://www.safekids .org
Safety BeltSafe U.S.A
Tel.: (800) 7 45 -SAFE (Eng Lish)
Tel.: (800) 747-SANO (Spanish)
http://www.carseat.org
Transport Canada Information Centre
Tel.: 1-800 -333-0371 or call
1-613-998-8616 if you are in the Ottawa area
http://www.tc.gc.ca/eng/roadsafety/
menu.htm
Audi Customer Relations
Tel.: (800) 822-2834
M N
0 ..J
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
when you turn on the ignition and start the
engine.
With the engine turned off
If you listen to the radio, for example, with
the engine turned off or use other MMI func
tions, the battery is being d ischa rged.
I f starting capability is jeopardized due to en
e rgy consumpt ion, the following warning ap
pears in the MMI display:
Please start engine, otherwise system will
switch off in 3 minutes.
The warning ind icates that the system will be
turned off automatically after 3 minutes. If
you wish to cont inue using the functions, you
have to start the engine.
With the engine running
Although electrical energy is generated when
the vehicle is be ing driven, the battery can be
come discharged . Th is happens mostly when
little energy is be ing generated and a great
deal consumed and the battery's state of
charge is not optimal.
To br ing the energy balance back into equili
brium, consumers which require especially
l arge amounts of energy are temporarily cut
back or swit ched off. Heating systems in par
t icular requ ire a great deal of energy.
If you
notice, for example, that the heated seats* or
the heated rear window are not heating, they
have been temporari ly cut back or switched
off. These systems will be avai lab le again as
soon as the energy balance has been restored.
You will a lso notice that engine idle speed has
been increased slightly . This is norma l and not
a cause for concern . By increasing engine idle
speed the add itiona l energy required is gener
ated and the battery is charged.
Driver notification in the instrument
cluster display
If battery power drops into the range where it
can limit the ability of the engine to start, this
Intelligent technology 229
is shown in the instrument cluster display
with the following driver message:
(•) I.ow battery charge: battery will be
charged while driving
T h is not ificat ion reminds you that the start ing
capability of the engine may be limited. As
soon as you start driv in g again, the battery
will be recharged and the not ific at ion w ill go
out.
Driver notification appears and goes out
again
If t his driver notification appears after the ig
nition is tu rned on or whi le driving and it goes
out again after a while, the battery has been
adequately recharged.
Driver notification appears and does not
go out again
If this driver notification appears after the ig
nition is turned on or whi le driving and does
not go out again, the battery's state of charge
is not in the optimal range. Starting ab ility is
restricted . Have the battery checked as soon
as possible by an authorized Aud i dealer or
qualified workshop.
•
•
M N
0 ...J
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
-If you notice unusual vibra
tion or if the vehicle pulls to one side when driving, al
ways stop as soon as it is safe to do so and check the
wheels and tires for dam age.
(D Note
-Please note that summer
and winter tires are de
signed for the conditions
that are typical in those sea
sons. Audi recommends using winter tires during the
winter months. Low tem peratures significantly de
crease the elasticity of
summer tires, which affects
traction and braking ability.
Tires and wheels 273
If summer tires are used in
very cold temperatures, cracks can form on the tread
bars, resulting in perma
nent tire damage that can
cause loud driving noise and unbalanced tires. Audi is not
responsible for this type of
damage.
-Burnished, polished or chromed rims must not be used in winter road condi
tions. The surface of the
rims does not have suffi
cient corrosion protection
for this and could be perma
nently damaged by road salt
or similar substances.
•
•
'
Glossary of tire and loading terminology
Accessory weight
means the combined weight (in
excess of those standard items
which may be replaced) of auto matic transmission, power
steering, power brakes, power
windows, power seats, radio, and heater, to the extent that
these items are available as fac
tory-installed equipment (whether installed or not).
Aspect ratio
means the ratio of the height to
the width of the tire in percent. Numbers of 55 or lower indi
cate a low sidewall for im
proved steering response and
better overall handling on dry
pavement.