2015 AUDI A7 spare tire

M N <( I.J "". rl I.O
"' rl
"' rl
What do I do now? Emergency warning
triangle
App lies to vehicles: with emerge ncy warning triangle
The warning triangle is located on the inside
of the trunk lid .
D -
!I l
Fig. 207 Trunk lid: Warn ing triang le
.,. To open the cover, turn the locking mecha­
nism and pull the cover downward .
"' M ~
~ .. m
.,. Remove the warning triangle from its hold ­
er .
The rear lid is only designed to hold the warn­
ing triangle offered by the original accessories
program. If you would like to retrofit your ve­
hicle with a warning triangle, please contact
your authori zed Audi dealer.
Vehicle tool kit
Vehicle tool kit and jack
The vehicle tool kit is located in the luggage
compartment under the cargo floor cover.
Fig. 208 Luggag e compa rtm en t: ca rgo floo r cov er
fol ded upwa rd /spa re tir e
What do I do now? 273
Fig . 209 Tru nk l id: Ve hicle too l kit
.,. Fold the floor to the seatback with the help
of the handle .
.,. Turn the handwheel counter-clockwise
q fig. 208 and remove the spare tire to
reach the vehicle tool kit.
T he onboard tool kit includes:
- Hooks to remove the whee l covers*
- Plastic hook to remove wheel bolt covers*
- Wheel bolt wrench
-Alignment pin for changing wheels
- Screwdriver with reversible blade
- Tow ing eye
-Jack
Before storing the jack, make sure it is wound
back down as far as it will go.
A WARNING
Im proper use of the vehicle jack can cause
serious personal injuries .
- Never use the screw driver hex head to
tighten w heel bolts, since the bolts can­
not attain the necessary tightening tor­
que if you use the hex head, potentially
causing an accident .
- The factory-supplied jack is intended on­
ly for your vehicle model. Under no cir­
cumstances should it be used to lift
heavy vehicles or other loads; yo u risk in­
juring yo urself.
- Never start the engine when the vehicle
is raised, which could cause an accident.
- Support the vehicle securely with appro­
pria te stands if wor k is to be performed
underneath the vehicle ; otherwise, there
is a potential risk for injury. ..,.

274 What do I do no w?
-Never use the jack s upplied with your
Audi on another vehicle, particularly on a heavier one. The jack is only suitable for
use on the vehicle it came w ith.
- Some of the on board items listed above
are provided on certain mode ls only or
are optiona l extras.
- Before you can raise your vehicle using
the jack, you must activate the jack ing
mode
Qpage 277.
Space-saving spare tire (compact spare
tire)
The spare tire/wheel is located in the luggage
compartment under the cargo floor cover. It
is intended for short-term use only.
Taking out the sp are tire
,. Fold the floor to the seatback with the help
of the handle.
,. Turn the large screw
Q page 2 73, fig. 208
counter-clockw ise .
,. Take out the spare tire .
,. Always store the vehicle tool ki t, the jack*
and the replaced t ire in the l uggage com­
partment
Q page 134.
Using the spare tire (compact spare tire )
The compact spare tire is only intended for
emergenc ies until you can reach a repair shop.
Replace it as quickly as poss ible with a s tand­
a rd wheel and tire.
There are some restrictions on the use of the
compact spare t ire. Th e compact spare t ire
has been des igned specifically fo r your type of
ve hicle . It must not be swapped with a com­
pact spare ti re from another type of vehicle .
Snow chains
For technica l reasons, the use of snow chains
on the compact spare tire is
not p ermitt ed .
If you do have to dr ive with snow cha ins and a
front tire fails, mo unt the spare wheel w ith
tire instead of a rear t ire. I nstall the snow chains on the rear tire and use it to rep
lace
the defective front tire.
A WARNING
-- Never use the spare t ire if it is damaged
or if it is worn down to the tread wear in­
d icators.
- If the spare tire is more than 6 years old, use it only in an emergency and with ex­
treme caution and careful driv ing.
- The spare tire is intended only for tem­ porary and short-term use. It s hou ld be
replaced as soo n as poss ible with the
normal wheel and tire.
- After mounting t he compact spare tire,
the t ire pressure must be checked as
soon as possible . The tire pressure of the
compact spare t ire must be 4. 2 ba r; oth­
erwise, you risk having an a cc iden t.
- Do not dr ive faste r th an
50 mph (80 km/
h). Yo u ris k having a n accident.
- Avoid full-throttle acceleration, heavy
b rak ing, and fast corne ring. You risk hav­
ing
('I n accident.
- N ever d rive using more than one spa re
wheel and ti re. You r is k having an ac ci­
dent.
- Normal summer or winter t ires must not
be mounted on t he compa ct spare w heel
r im.
- For technica l reasons, the use of tire
ch ain s on the sp are tire is not permitted.
If i t is necessary to drive with tir e c hains,
the spare wheel must be mounted on the
f ront ax le in the event of a flat in a rear
tire. The new ly available front whee l
m ust then be insta lled in place of the
rear whee l w ith the flat tire. Installing
the t ire chain before mounting the whee l
a nd tire is recommended .
- Loose items in the passenger compart­
ment can cause se rious personal injury
du ring hard b rak ing or in a n accident.
Never store the i nflatable spa re tire or
jack and tool s in the passenge r compart­
men t.

M N <( (.J
'SI: ,...., \!) ..,.,
,...., ..,., ,....,
Changing a wheel
Before changing a wheel
Observe the following precautions for your
own and your passenger's safety when chang­
ing a wheel .
.,. After you experience a tire fa ilure, pull the
car well away from moving traffic and try to
reach
level gro und before you stop¢.&_ .
.. All passengers should
leav e the car and
move to a safe location (fo r instan ce, be hind
the guardra il) ¢.&_ .
.. Engage the
parkin g brake to prevent your
vehicle from ro lling unintentionally ¢.&_ .
.. Move
selecto r le ver to p osition P ¢ .&_ .
1> Ifyou are towing a trai ler, unh itch the tra iler
from your vehicle .
.,. Take the
jack and the spare tire out of the
luggage compartment
¢ page 273,
¢ page 274 .
.8, WARNING
You or your passengers cou ld be injured
while changing a whee l if yo u do not fol­
low t hese safety precautions:
- If you have a flat t ire, move a safe dis ­
tance off the road. Tur n off the eng ine,
turn the emergency f lashers on and use
other warning dev ices to alert other mo­
torists.
- Make sure that passengers wait in a safe
place away from the ve hicle and well
away from the road and traff ic.
- To help p revent the vehicle from moving
s u dden ly and possibly slipping off the
jack, always fully set the parking brake
and block the wheel diagonally opposite
the wheel being changed. Whe n one
front wheel is lifted off the ground, plac­ ing the A utomat ic Transm iss ion in P
(Pa rk) will
not p revent the vehicle from
moving.
- Before you change a wheel, be su re the
ground is level and fi rm. If ne cessa ry,
use a st urdy board under the jack.
-
What do I do now? 275
- Always store the vehicle tool kit, the jack
and the replaced tire in the luggage com­ partment
c::>page 134.
(D Tips
Before changing the whee l, you must acti­
vate the jacking mode, so that the auto­ matic controls for the Adaptive Air Sus­
pension* do not make it more d iff icult to
lift the vehicle with the jack
c::> page 2 77 .
Changing a wheel
When you change a wheel , follow these­
quence described below s tep-by-s tep and in
exactly that order .
l. Activate the vehicle jack mode*
¢page 277 .
2. Remove the decorativ e wheel co ver* . For
more details see also
c::> page 2 76, Deco­
rative wheel covers
or c::> page 2 76,
Wheels with wheel bolt caps .
3. Loosen the wh eel bolt s ¢page 277.
4 . Loca te the p roper moun ting poin t for the
jack and align the jack be low that point
¢ page 277 .
5.
R ais e the car with the jack¢ page 2 77.
6. Remove the
wheel with the flat tire and
then install
the spar e c::>page 279.
7. Tighten all whee l bolts lightly .
8.
Lo wer the vehicle with the jack .
9 . Use the wheel bolt w rench and
firmly
t ighten al l wheel bolts ¢ page 2 77.
10 . Replace the decorative
wh eel c ov er* .
11. Deactivate the vehicle jack mode* in the
MM I:
ICARI f u nction button > (Car )* sy s­
tems
contro l button > S erv ici ng & che cks
> A ir s usp .: jac k mode > Off .
The vehicle jack mode * switches off automati­
ca lly at speeds above 6 mph (10 km/h) .
.8, WARNING
-Always read and fo llow all WARNINGS and
i nformat ion
c::> A in Raising the vehicle on
page 278
and c::> poge 280.
•
•

276 What do I do n ow ?
After changing a wheel
A wheel change is no t complete without the
doing the following .
.. Always store the vehicle tool kit, the jack*
and the replaced tire in the luggage com­
partment ¢
page 134.
.. Check the tire pre ssur e on the spare wheel
immediately after mount ing it .
.,. As soon as possible, have the
tightening
torqu es
on all wheel bol ts checked with a
torq ue wrench. The correct tightening tor ­
que is 90 ft lb (120 Nm) .
.. Have the flat tire
replaced as soon as possi­
ble.
@ Tips
- If you notice t hat the wheel bolts are
corroded and difficult to t urn while
changing a t ire, they should be replaced
before you check the tighten ing torque.
- Drive at reduced speed unt il you have the
tightening torques checked .
- After changing a wheel, the tire pressure
i n a ll four tires must be checked/correct­
ed and the tire pressure mon itor ing indi­
cator must be stored in the MMI
¢ page 272 .
Decorative wheel covers
Applies to vehicles: with decorative wheel covers
T he decora tive wheel covers must be removed
first to access the wheel bolts .
Fig. 210 Cha nging a w hee l: Remov ing t he w heel cove r
Removing
.,. Inse rt the hook (prov ided with the veh icle
tool kit) in t he hole in the wheel hub cove r. ..
Pull off the
de cora tive wheel co ver
¢ fig . 210.
Wheels with wheel bolt caps
Applies to veh icles: w it h w heel bolts with caps
The caps must be removed first from the
wheel bolts before the bolts can be un­
screwed.
Fi g. 211 Cha ng ing a whee l: re m oving t he w hee l b o lt
caps
Removing
.. Push the plastic clip (provided with t he veh i­
cle tool k it) over the wheel bo lt cap until the
inner retainers on the clip align w ith the
edge of the cover.
.,. Remove the cap with the
plastic clip (vehicle
tool kit)
i=> fig . 211 .
Refitting
.. Place the caps over the whee l bolts and
push them back on.
The caps are to protect and keep the wheel bolts clean .

M N <( I.J - "' rl
"' rl
Taking the wheel off/installing the spare
Follow these instructions step-by-step for
changing the wheel.
Fig. 216 Changing a wheel: using the screwdriver han­
dle (with the blade removed} to turn the bo lts
F ig . 2 17 Changing a wheel: alignment pin ins ide the
top hole
After you have loosened a ll wheel bolts and
ra ised the veh icle off the ground, remove and
replace the wheel as follows:
R emoving the wheel
.. Use the hex agon al so ck et in th e screw driv­
e r handle
to comp letely remove the top­
most wheel bo lt and set it aside on a
clean
s u rface ¢fig. 216.
.. Screw the threaded end of the alignm ent
pin from the tool k it hand -tight into the
empty bolt hole
¢fig. 217.
.. Then remove the other wheel bo lts as de­
scribed above .
.. Take off the wheel leav ing the alignment pin
in the bolt hole
¢ (D.
Putting on the spar e wheel
.. Lift the spare wheel and carefully slide it
over the alignment pin to guide it in place
¢(D.
What do I d o now ? 2 79
.. Use the hexagonal socket in the screwdriver
handle to screw in and tighten all wheel
bolts
slightly.
.. Remove the alignment pin and insert and
tighten the remaining wheel bolt slightly like the rest.
.. Turn the jack handle counter-clockwise to
lower the veh icle until the jack is fully re­
leased .
.. Use the wheel bo lt wrench to tighten all
wheel bo lts f irm ly
¢page 277. Tighten
them
crosswise, from one bolt to the (ap­
proximately) opposite one, to keep the
wheel centered.
(D Note
When removing or installing the whee l,
the rim could hit the brake rotor and dam­
age the rotor. Work carefu lly and have a
second person help you.
@ Tips
Neve r use the hexagonal socket in the han ­
dle of the screwdriver to loosen or tighten
the w heel bo lts.
- Pull the reversible blade from the screw­
dr iver before you use the hexagonal
socket in the hand le to turn the wheel
bolts.
- When mount ing tires w ith
unidi rectional
tread design
make sure the tread pat­
tern is po inted the right way
~page 280.
-The wheel bo lts shou ld be clean and easy
to turn. Check for dirt and corrosion on
the mating surfaces of both the wheel
and the hub. Remove all d irt from these
surfaces before remounting the whee l.

28 0 What do I do no w?
Tires with unidirectional tread design
Tires with unidirectional tread design must be
mounted with their tread pattern pointed in the right direction .
Using a sp are t ire wi th a tread pattern
int ended fo r use in a specific dir ect ion
When us ing a spare tire w ith a tread patte rn
intended for use in a specific direction, please
note the following:
- The direction of rotation is marked by an ar­
row on the side of the tire.
- If the spare t ire has to be installed in the in­
correct direction, use the spare tire only
temporarily since the t ire will not be able to
achieve its optimum performance character­
ist ics with rega rd to aquaplaning, noise and
wea r.
- We recommend that you pay particular at­
tent ion to this fact du ring wet weather and
that you adjust your speed to matc h road
conditions.
- Replace the flat tire w ith a new one and
have it installed on your vehicle as soon as
possible to restore the handling advantages
of a unidirectiona l tire .
Notes on wheel changing
Please read the information c> page 260 , New
t ires and replacing tires and wheels
if you are
going to use a spare tire which is different
from the tires on your vehicle .
After you change a tire :
-Che ck the tire p re ssure on the sp are imme ­
di ately afte r in st a llat ion.
- Ha ve th e wh eel b olt tightenin g torque
che ck e d w ith a torque wrench as soon a s
possible b y you r autho rized Aud i de aler o r
a qu alified ser vice station .
- With ste el and alloy wheel rims , the wheel
bolts are cor rectl y tightened at a torque of
90 ft lb (1 20 Nm ).
- If yo u notice that the wheel bolt s are cor­
r oded a nd d iffi cult to tu rn while changi ng
a t ire, the y should be replaced before you
check the t ightening torq ue. -
Re pl ac e the flat ti re with a new one and
h av e it in st a lled on you r vehicle as soon as
po ssible. Remount th e wheel cov er.
Un til then , driv e with ex tra c are a nd at re­
duc ed sp ee ds.
A WARNING
-
- If you are going to equ ip your vehicle
with tires or rims which differ from those
which were factory installed, then be
sure to read the information
9 page 260,
New tires and replacing tires and
wheels .
-Always make sure the damaged wheel or
even a flat tire and the jack and tool kit
are properly secured in the luggage com­
pa rtment and are not loose in the pas­
senger compartment.
- I n an accident or sudden maneuver they
could fly forwa rd, injuring anyone in the
veh icle.
- Always sto re damaged wheel, jack and
too ls securely in the luggage compart­
ment. Otherwise, in an accident or su d­
den maneuve r they could f ly forward,
causing injury to passengers in the ve hi­
cle.

29 6 Con sum er Inf ormation
-Always make sure the transmission se­
lector lever (automatic transmiss ion) is
in P (Park position) and the park brake is
applied .
@) For the sake of the environment
-Changing the engine settings wi ll ad­
versely affect em iss ion levels. This is det­
rimental to the environment and increas­
es fuel consumption .
- Always observe env ironmental regula­
tions when dispos ing of old engine oil,
used brake fluid, dirty engine coolant,
spent batteries or worn out tires.
- Undeployed airbag modules and preten­
s ioners might be classified as Perchlo ­
rate Material -spec ial handling may ap­
ply, see www.dtsc.ca .gov/hazardous­
waste/perch lorate . When the veh icle or
parts of the restraint system including
airbag modules safety belts wit h preten ­
sioners are scrapped, all applicable laws
and regulations must be observed. Your
authori zed Aud i dea ler is familiar with
these requirements and we recommend
that you have your dealer perform this
serv ice for you .
Additional accessories,
modifications and
parts replacement
Additional accessories and parts
replacement
Always consult an authorized Audi dealer be­
fore purchasing accessories.
Your veh icle incorporates the latest safety de­
sig n featu res ensu ring a high standard of ac­
tive and passive safety .
This safety could be compromised by non-ap­ proved changes to the veh icle. For this reason ,
if pa rts have to be replaced , please observe
the following points when install ing addition­
a l accessories: Approved Audi accessories and genuine Aud
i
parts are available from authorized A udi deal­
ers.
T hese dea le rs a lso have the necessary facili­
ties, tools and trained specialists to install the parts and acc essories proper ly .
A WARNING
-Using the wrong spare parts or using non-
approved accessories can cause damage to
the veh icle and ser ious persona l injury.
- Use on ly accessories express ly approved
by Audi and gen uine Audi spare parts
- These parts and accessories have been
specia lly designed to be used on yo ur ve­
h icle .
- Never install accessor ies such as tele­
phone crad les or beverage ho lders on a ir­
bag covers or within the airbag deploy­
ment zones . Do ing so will increase the
risk of injury if a irbags are triggered in an
accident!
- Before you check anything in the engine
compa rtment, always read and heed a ll
WARNI NGS
9 page 225 .
(D Note
-If items other than genu ine Audi spare
parts, add-on equipment and accessory
items are used or if repair work is not
performed accord ing to specified meth­
ods, this c an resu lt in seve re damage to
your vehicle's eng ine and body (such as
corrosion) and adversely affect yo ur vehi ­
cle's warranty .
- If emergency repairs must be performed
elsewhere, have the vehicle examined by
an authorized A udi dealer as soon as
possible .
- The manufacturer cannot be held liable
for damage wh ich occ urs due to failure
to comply with these stipu lations.

M N <( (.J
'SI: ,...., \!) 1.1'1 ,...., 1.1'1 ,....,
Certification .... ... .... ... .. .. .. ... 297
Changing a wheel ................... 275
Changing engine o il ........ .. .. .. .. . 230
Chec king
E ng ine coolant leve l .... ... .. .. .. .. . 23 1
Tire pressure . .. .. ..... ... .. .. .. ... 252
Ch ild restra ints
D anger of using c hild restra ints in the
fro nt sea t . . . . . . . . . . . . . . . . . . . . . . . . 149
Where can I get add it ional information
about child restra ints and their use? .. 19 1
Ch ild restra int system anchors . ....... 187
Ch ild safety .. ............. .... .. ... 173
Convertible locking retractor . . . . . . . . . 184
Important safety instructions for us ing
ch ild safety seats ...... ..... .. .. .. . 177
I mportant th ings to know when dr iv ing
wi th ch ild ren ............ .... .. ... 173
Tether anchors ........... .. .. .. ... 190
Tether straps ... ...... ... .. .. .. .. . 190
Ch ild safety lock
Rear doors ........................ 40
Ch ild safety seats .......... .... .. ... 179
Booster seats ............ .... .. .. . 182
Convertible c hild seats ....... ... .. . 180
Convertible locking retracto r .. ....... 184
H ow do I properly install a child safety
seat in my vehicle? ........ .. .. .. .. . 177
I nfant sea ts ............. .... .. .. . 179
I ns tall ing .. ............. .. .. .. .. . 184
I ns tal ling a child restraint using the
L A TCH system .. .. ..... ... .. .. .. ... 189
LATCH system . . . . . . . . . . . . . . . . . . . . . 189
Lower anchorages ........ .. .. .. .. . 188
Mounting and releasing the anchorage
hook .. .. .. .. ........ ..... ... ... . 189
Safety instructions ................. 177
Unused safety belts on the rea r seat .. 179
Cigarette lighter . . . . . . . . . . . . . . . . . . . . . 59
Cle aning .. .. ............. .... .. .. . 212
Climate control Air vents ... ... .. .. ... ... .. .. .. .. .. 71
Climate controls . . . . . . . . . . . . . . . . . . . . . 69
Climate con trol sy stem
Supp lementary hea ter .. ... .. .. .... .. 74
Climate control (four-zone) Operation . . . . . . . . . . . . . . . . . . . . . . . . . 72
Inde x 301
Climate control (three -zone)
Operation . . . . . . . . . . . . . . . . . . . . . . . . . 70
Clock .............................. 27
Closing Rear lid ........................... 37
Slid ing/tilting sunroof ......... .... .. 41
Cold tire inflation p ress ure ..... ... .. .. 247
Coming home . .. .. ................. . 46
Compact spare tire .................. 274
Compartments .. .... . ... ...... ... .. . 60
Compliance ....... .. ............... 297
Consumer Information . . . . . . . . . . 136, 294
Consu mption (f uel) ............. .. .. . 25
Contacting NH TSA ................. . 136
Controls Cleaning . ... .. .. .. .. .. ...... ... .. 214
Convenie nce key . ...... ............. . 35
Star ting the engine . ........... .... . 76
S topping the eng ine (START ENG INE
STOP b utton) . . . . . . . . . . . . . . . . . . . . . . 77
Switching the ignition on .... ... .. .. . 76
U nlocking and locking vehicle ......... 35
Convertib le child sa fe ty se ats ......... 180
Convertib le locking retractor
Activati ng . . . . . . . . . . . . . . . . . . . . . . . . 186
Deact ivating . .. .. .. ..... .......... 186
U sing to secu re a child safety seat 1B4, 186
Coolant
refer to Engine coolant ............ . 231
Cooling mode (automatic climate control) 72
Cooling mode (climate cont rol) . . . . . . . . . 70
Cruise contro l
Changi ng speed .. .. . .. .. ... ..... .. . 84
P resett ing your speed ............... 85
Switching off ...................... 85
Switch ing on . .. .. .... ........... .. . 84
Wa rning/ind icator lights ........ .. .. . 23
(upholder .. .. .. .. ... ... ...... ..... . 60
C ur ve lig ht . ... .... ... .. .. ..... ... .. 102
Cylinder managem ent
refer to Cyli nder on dema nd System .. . 25
Cyl inder on demand System
25
D
Data recorder ... ...... ............. 194
Date d isp lay .. .. .. .. ............... . 27
•
•