2015 AUDI A5 CABRIOLET buttons

M N
ci u.. co ,...., \!) ..,.,
N ..,., ,....,
CD
@
®
©
®
®
Door handle
Power locking switch
Memory buttons (driver's seat) . .
Button for side assist
A ir outlets
Control lever for :
- Turn signal and high beam
0 Multifunction steering wheel with :
- Horn
- Driver's airbag ....... .... .. .
- Audio/video, telephone and navi-
gation buttons
- Rocker switches for tiptronic op-
eration ................... .
@ ISETI button ................. .
® Instrument cluster ..... .. .. .. .
@
@ Reset button for trip odometer
Switches for:
- Windsh ield wiper/washer
- Trip computer . ....... .. .. .. .
I gnition lock ................ .
Adjustable steering column
Control lever for:
- Cruise control .............. .
- adaptive cruise control ....... .
@ Instrument lighting ........ .. .
@ Release lever for the engine hood
@ Data Link Connector for On Board
Diagnostics (OBD II) ........ .. .
@ Light switch ........ ... .. .. .. .
@ Adjuste r control for outside
mirrors . ... .............. ... .
@ Power window switches ... .... .
@ Radio-Disp lay1l or MMI-Display
33
63
99
51
136
87
11
10
12
55
24
73
73
81
90
53
195
28
so
53
37
l ) The image in t he d is pl ay w ill appear e ither in multiple col ­
o rs or in a single colo r, depending on the vehicle e quip­
ment. The mult i color image will be u sed in this Owner 's
Manual because both multi co lo r an d single colo r ve rs io n s
are a lmost identical.
@
@
@
Depending on options:
- Radio system
- CD changer
Emergency flasher
Glove compartment (lockable) .. .
Front passenger's airbag ...... .
Depend ing on options, switches
for:
- drive select .. .............. .
- Electronic Stabilization Control .
Deluxe automatic climate control
Selector lever for automatic trans-
mission . ..... .............. .
@) Ashtray with cigarette lighter
@ Depending on options:
- MMI control console or
- drive select . ............... .
- Electron ic Stabilization Control
button ...... ... .......... . .
@ Central power window switch
@ Power top switch . ... ..... ... . .
@ I START ENGINE STOPI button .. .
@ Electromechanical parking brake
0) Tips
Cockpit
52
65
136
103
170
68
85
64,64
103
170
42
75
77
- Some of the equipment or features shown in the general illustration may be standard
equipment on your vehicle or may be op­
tional equipment depending on your model.
Always ask your authorized Audi dealer if
you have a question about your vehicle.
- Operation of the Multi Media Interface
(MMI) is described in a separate manua l.
9

Opening and closing
• Turn the key to position ¢ fig . 30 @ until all
the windows have reached the des ired position.
Convenience closing feature
• Use the emergency key or pull the mechanical
key out of the master key
¢ page 31.
• Turn the key in the lock of the dr iver's door to
the lock pos ition @ unt il the windows are
closed
¢ _A .
.&_ WARNING
- Never close the windows inattentive ly and
without checking -there is r isk of injury.
- You must always watch when the windows
are being ra ised so that no one can be trap­
ped.
If you release the key, the closing ac­
tion is immediately canceled.
- Always read and heed WARNING ¢
& in
General description on page
29 .
Correcting window regulator malfunction
-
After disconnect ing the vehicle battery, the one­
t ouch up and down feature mus t be activated
again.
• Pull and hold the power window switch until
the window is complete ly closed.
• Release the switch and pull the switch again for
one second .
Valet parking
Applies to vehicles: with valet parking functio n
The valet parking feature protects the luggage
compartment from unauthorized access .
-
Fig. 31 Glove compar tment: valet parking bu tton
38
You can switch the "valet parking function" on
when someone else is park ing your vehicle. When
the function is switched on, the vehicle can be
driven , locked and unlocked using the master key,
but access to the luggage compartment is not
permitted.
• Take the mechanical key out of the master key
¢page 31 .
• Open the glove compartment¢ page 65.
• Activate ¢ fig. 31 the "valet parking" feature by
press ing the
!VA LET I button . The indicator light
in the switch illuminates.
• Close the glove compartment and lock it w ith
the mechan ical key.
• Leave the master key with the service personnel
for parking and keep the mechanical key with
you.
The following buttons are deactivated when the
valet parking function is switched on :
-
~ button on the master key
- Handle in the rear lid
When the valet parking feature is activated, the message
Valet parking activated appears in the
instrument cluster display when you switch the
i gnition on.
Garage door opener
(Homelink)
Description
App lies to vehicles: with garage door opener (Homelink)
Fig. 32 Garage door ope ne r: examples o f us ing w ith d iffer ­
ent systems
You can activate various systems such as garage
doo rs, security systems and home lighting from
i nside your vehicle using the garage door opener .,.

M N
ci LL co
rl I.O
"' N
"' rl
(Home link). There are three buttons for this in
the vehicle headliner that can be in used in p lace
of up to three hand-he ld transmitters.
To operate systems using the garage door open­ er, the three buttons in the roof head liner must
be programmed first.
A WARNING
Make sure no people or objects are in the im­
mediate v icin ity of the eq uipment when us ing
or programm ing the garage door opener . Peo­
ple can be injured and objects can be dam ­
aged if they are caugh t in the equipment.
{!) Tips
-For security reasons, we recommend that
you clear the programmed buttons before
se lling the vehicle .
- For additional informat ion about Homelink,
v is it www.homelink .com.
- Fo r Declarat ion of Compliance to United
States FCC and Industry Canada regulations
¢ page 251.
Operation
App lies to vehicles: with garage door opener (Homelink)
Fig. 33 Hea dlin er: co ntro l un it
Requirement : The b uttons in the roof headliner
must be programmed
¢ page 39 or
¢ page 40 and the vehicle must be within
range of the system, such as the garage door
opener .
.,. Press the button to open the garage door. The
LED @blinks or tu rns on .
.,. Press the button again to close the garage
doo r.
Open ing and clo sing
(D Tips
To open or close the garage door, press the
button, but do not hold it for longer than 10 seconds or the garage door opener module
will sw itch to programming mode.
Programming the buttons (version A)
Applies to vehicles: with garage door opener (Homelink)
You can program both fixed code and rolli ng code
systems usi ng this procedure .
Programming or reprogramming buttons
.,. Switch the ignit ion on.
.,. Press and hold the button in the roof headliner
¢ page 39, fig. 33 that you would like to pro­
gram fo r at least 10 seconds . Or
.,. Select:
!CAR I function button> Car systems*
cont ro l button > Vehicle setting s > Garage
door opener > Program garage door open er.
If
t his pa th is no t avai lable, program t he b utton
as desc ribed in version B
¢ page 40.
.,. Follow the i nstr uctions in the MMI.
Erasing button programming
T he programmed b uttons cannot be erased ind i­
vidually. They m ust all be e rased together. Repro ­
gram the bu ttons if necessary .
.,. Select:
!CARI function button> Car syst em s*
cont ro l but to n > Vehicle setting s > Garag e
door open er > Clear program setting s > Yes.
Displaying the version /status /country code
.,. Select: !CARI function button > Car system s*
contro l button > V ehicle s etting s > Garage
door opener > Ver sion information .
(D Tips
-Programm ing throug h the MMI* is not pos ­
sible with all infotainment systems. If this
is the case, program the but to ns as descri­
bed i n vers ion B
¢ p age 4 0.
- The req uir ed dis tanc e betwee n th e hand
transm itter an d the Home link mod ule in
t he radiator grille¢
page 40, fig. 34 de­
pen ds on t he system tha t you are program­
m ing.
39

Opening and closing
- Depending on the model of the system, you
may need to release the button on the re ­
mote contro l during pr ogramm ing and
press it again. Hold each pos it ion you try for
at l east 15 seconds before trying another
position . Keep the t urn signals o n your veh i­
cle in view when do ing t his.
- After programmi ng the garage door ope ner,
i t may be necessary to synchronize the mo­
tor w ith the system . Refe r to the manufac­
ture r's instructions .
Programming the buttons (version B )
Applies to vehicles : with garage door opener (Homelink)
F ig . 3 4 Distance betwee n th e ra di ato r grille a nd the ha nd
tra nsm itt er
Programming the button : Part 1 with the
c ontr ols
1. Sw itch the ignition on .
2. Press and hold bot h outer buttons in the roof
headliner ¢
page 39, fig. 33 until the LED @
turns off complete ly (after about 20 sec­
onds) . Th is p rocedure clears the sta ndard co­
des that w ere se t at the factory and does
not
need to be repeated aga in to p rog ram th e
o ther bu ttons.
3. Brie fly press the bu tto n on the roof he adliner
that yo u wou ld like to program.
4. Wai t unti l the LED @ begins to b link quickly.
Prog ramming mode is active for 5 minutes .
5 . Move in front of your ve hicle while ho lding
the original remote contro l for the system
that would like to program to a button in the
roof headli ner .
40
Programming the button: Part 2 at the
radiator grille
6. Hold the remote control up to the radiator
gri lle on your vehicle¢
fig. 34.
7. Press and ho ld the remote control unt il the
tu rn s ignals on your vehicle blink. This may
take up to 30 seconds.
8 . If the eme rgency flashers blink th ree times,
the p rogramming was su ccessf ul. If the
eme rgency flas hers only b link one t ime, t he
5 m in ute time limit for the pr ogr amming has
ende d or the progr amming was not s uccess­
ful. Repeat the programmi ng from the third
step, or try changing the distance to the radi­
ator grille .
9. If the garage door or other system does not
open us ing the buttons in the roof headliner
even though the prog ramming was success­
ful , the system may use a rolling code i n­
ste ad of a fixed code .
Rolling code program­
ming
m ust be perfo rmed ¢ page 41.
The other two b uttons in the roof headliner can
be p rogrammed acco rding to th e inst ruct ions
above . Beg in with the thir d step.
Erasing button programming
The programmed b uttons cannot be erased ind i­
vidually . They m ust all be erased together . Repro­
gram the buttons if necessary .
.. Switch the ignit ion on.
.. Press and hold both outer buttons in the roof
head liner until the LED @ turns off completely
(after about 20 seconds) .
Reprogramming the button s
.. Switch the ignition on .
.. To reprogram an individua l butto n, press and
hold the button unt il the LED @ starts to flash
quickly (after about 10 seconds) . Release the
button immed ia tely . Programm ing mode is ac­
t iv e fo r 5 m inutes.
.,. Cont inue with t he fifth ste p.
@ Tips
- Programming using the buttons in th e r oof
hea dliner is no t poss ible wit h all In fotain ­
m ent s yst ems. If this is th e ca se, pr ogr am

M N
ci u.. co ,...., \!) ..,.,
N ..,., ,....,
the buttons as described in version A
¢ page 39.
- The required distance between the hand
transmitter and the Homelink module in
the radiator grille¢ fig. 34 depends on the
system that you are programm ing.
- Depending on the model of the system, you
may need to release the button on the re­
mote control during programm ing and
press it again. Hold each posit ion you try for
at least 15 seconds before trying another
pos ition. Keep the turn signals on your veh i­
cle in view when doing this.
Rolling code programming
Appl ies to vehicles: with garage door opener (Homelink)
Rolling code programming is also needed for
some systems.
Identifying a rolling code
~ Press and ho ld the button in the roof head liner
that was already programmed .
~ Watch the LED@ Q page 39, fig. 33. If the LED
blinks quickly, the systems (such as a garage
door) is equ ipped with a rolling code.
~ Program the rolling code as fo llows:
Activating the motor unit in a system
~ locate the programming button on the sys­
tem's motor unit . The exact location and color
of the button may vary depending on the brand
of the system .
~ Press the programm ing button on the garage
doo r opener motor unit (this will us uall y acti­
vate an "ind icator" on the moto r unit). You now
have approximately
30 seconds to prog ram the
button in the roof headliner.
Programming the button in the roof
headliner
~ Press and ho ld the previously programmed but­
ton in the roof headliner for 2 seconds .
~ To end rolling code programming, press and
ho ld the button aga in for 2 seconds.
~ With some systems, the button may need to be
pressed a th ird time to end the programming
process .
Opening and closing
After programming , the system should detect
the signal and begin moving when the button in
the roof head liner is pressed. Now you may pro­
gram the other buttons as needed.
{!) Tips
- The rolling code can be programmed more
quickly and more easily with the help of a
second person.
- If you have difficulty programming the roll­
ing code, referring to the user guide for the
system may help.
41

M N
ci LL co
rl I.O
"' N
"' rl
(D Note
-To prevent damage to the power top:
- do not store any objects in the powe r top
compartment.
- make sure the re is enough space above
the vehicle when open ing or closing the
power top.
- To reduce the risk of damage, make su re
there are no fragile objects within the stor­
age bay's range of motion.
(D Tips
- To prevent the battery from draining, do not
open or close the power top repeatedly
when the engine is switched off.
- A message will appear in the instrument cluster display if there is a power top ma l­
funct ion
~ page 44.
- The power top can also be operated manual­
l y if there is a malfunct ion ¢
page 46,
Power top emergency operation. The cause
of the malfunction should be corrected by
an a uthorized Audi dea ler or authorized re­
pair facility as soon as possible.
- The vehicle is not protected from the weath­
er or from unauthorized entry if the vehicle
is left parked with the power top open. Lock
any objects you are leaving in the vehicle in
the luggage compartment. Close the power
top before leaving the vehicle.
- The side windows lower slightly automati­
cally when opening/closing the power top.
Power top convenience opening/closing
F ig . 36 Remote control key: buttons
Power top
Fig. 37 Turning the key to open and close
Convenience opening with the driver 's door
lock
-0
0
0 ... m
"" Press the@ button on the remote control key to
un loc k the vehicle .
.,. Turn the key once in the driver's door lock to
the opening position @¢
fig. 3 7.
.,. Turn the key to the opening position again
wi thin two seco nds and hold it there until the
power top opens completely.
Conv enience closing with th e dri ver's door
lo ck
.,. Turn the key once in the driver's door lock to
the closing position@¢
fig. 37.
.,. Turn the key to the closing position aga in with­
in t wo se cond s
and hold it there unt il the pow­
er top closes completely.
Releasing the key stops the opening or closing
process
i mm ed ia te ly .
A WARNING
Read and follow the important safety precau­
tions
c:> .&. in Opening/closing the power top
on page 42.
4 3

M N
ci LL co
rl I.O
"' N
"' rl
Memory function
Description
Applies to vehicles: with memory function
The memory function allows you to quick ly and
eas ily store and recall personal seating profiles
for the driver. The memo ry function is operated
through the master key and the memory buttons
in the driver's door.
The driver's seating profile is stored and assigned
to the master key each time the veh icle is locked.
When you open the door, the seat profile is auto­
matically recalled. If two people use one vehicle,
it is recommended that each person always uses
"their own" master key.
Up to 2 seat profiles can be stored in the memory
buttons in the driver's door. Once they are stored,
these seat profiles can be selected at any time .
I n addition to the driver's seat settings, you can
also store and access the exterior mirror adjust­ ment settings* using the remote control key or
memory button.
Remote control key
Applies to vehicles: with seat memory
To assign the driver's seat settings to the remote
control key when locking the vehicle, the function
must be activated in the radio or
MM!*
• Select: I CARI function button > Seat adjust·
ment > Driver's seat > Remote control key
>
on .Or
• Select: ~IC _A _ R~I function button> Car systems*
control button > Vehicle settings > Seats >
Driver's seat> Remote control key> On .
(D Tips
If you do not want another driver's settings to
be assigned to the remote key, switch off the
memory function using the radio or
MMI* or
the
I ON/OFF I button ~ page 63.
Seats and storage
Memory buttons
Applies to vehicles: with seat memory
Fig. 73 Driver's door: memory func tion buttons
The memory buttons are located in the driver's
door.
Switching the memory function on/off
.,. Press the ION/OFF ! button to switch the memo­
ry function on/off. The word
OFF lights up when
the memory function is switched off. Seat pro­
files are neither stored nor recalled .
Storing a seat profile
.,. Press the ISETI button. When the word SET
lights up, the memory is ready to store set­
tings.
• Press a memory button
(ill or [II) briefly. A tone
confirms that the settings were stored.
Accessing a seat profile
.,. If the driver's door is open and the ignition is
switched off, press the memory button .
.,. If the driver's door is closed or the ignition is
switched on, press and hold the memory but­
ton until the seat adjustment is complete.
.8, WARNING
- For safety reasons, the seat setting can only
be recalled when the vehicle is stationary -
otherwise you risk having an accident.
- In an emergency the recall procedure can be
cancelled by pressing the
ION/OFF I switch or
by tapping the memory buttons.
63

Warm and cold
Operation
We recommend pressing the !AUTO I button and setting the temperature to 72 °F (22 °C).
Fig. 83 Automatic cl imate control system: control
Fig. 84 3-zone del ux e automatic climate controt•: controls
Press the buttons to turn the functio ns on or off.
Use the dials to adjust the temperature, the
b lower speed and the air distrib ution . The LED in
a button will light up when the function is
switched on. The settings are displayed for a few
seconds in the radio or MMI* display.
In vehicles with a 3-zone del uxe automat ic cl i­
mate control systems*, the dr iver and front pas­
senger side can be adjusted separately. The set·
tings are also disp layed in the climate control
M system display. N
ci LL co
rl I.O
"' N
"' rl
IOFF I Switching the climate control system
on/off
The i OFF i button switches the climate contro l
system on or off. It also sw itches on when you
press the knob. Airflow from outside is blocked
when the climate control system is switched off.
IA/Cl Switching cooling mode on/off
The air is not coo led and humidity is not removed
when cool ing mode is switched off. This can
cause fog on the windows . The cooling mode is
switched off automatically at low outside tern· peratures. .,.
69