2015 AUDI A3 light

inspected. On USA models the warning light
[IJ comes on together with the warning light
• . Both sets of brake pads on an axle must
always be rep laced at the same time.
_& WARNING
Dr iv ing with bad brakes can cause a coll i­
sion and serious personal injury.
- If the warning light
[IJ and the warning
light
. l) with the message Brake pads!
comes o n in the instrument cluste r dis­
play, immed iately contact your au thor­
i z ed Audi dea le r or q ualified wor kshop to
have all bra ke p ad s ch ecked or rep laced if
necessary.
· ~ Hill hold
Hill hold a ssis t: un available
If th e> #j •ndicato r light turns on and this
message appea rs, hill ho ld is not available.
II Manual control!
If this message appears, press the b rake ped·
al.
Continue driving w ith the help of the parking
brake ¢
page 76.
EPC Engine control (gasoline engine)
Applies to vehicles: with gasoline engine
If the ~ indicator light turns on there is a
malfunct ion in the engine control.
D rive s low ly to your authorized Audi dealer or
q ua lified repair faci lity to have the engine
checked .
I f the ~ indica to r li ght turns on when you
start the engine, there is a malfunction in the
l aunch contro l. To start the engine, follow
these steps:
- Vehicles wi th a mechanical ignition
¢ page 71 ,
-vehicles wi th a compor t igni tion
c:> page 73.
1) . : USA mode ls onl y
Instrument s and indicator ligh ts 23
o Malfunction Indicator Lamp (MIL)
The Ma lfun ction Indi cato r Lamp ( MIL) is pa rt
of the On-Board Diagnos tic (OBD II) sys tem.
T he sym bo l
('4 lights up when the ignition is
switched on and will tur n off after the engine
has started and has settled at a constant idle
speed . This indicates that the MIL is work ing
properly.
T he wa rning lig ht ill uminates when the re is a
malfunction in the engine electronic system .
Contact your a uthorized Aud i dea ler and have
the malfunction corrected.
If the fuel fille r cap is closed incor rect ly, this
may also cause the MIL to turn on
c:> poge 208.
For more information ¢ page 29 .
!7, Engine speed limitation
Applies to vehicles: wi th engine speed lim itatio n
(m Max. engine speed: XXXX rpm
T he eng ine speed is automatically limi ted to
the speed displayed in the driver info rm ation
system . This pro te cts the engine from over ­
heating.
T he eng ine speed l imi ta tion dea ctivates on ce
the engine is no longer in the cri tical tempera ­
tu re range and yo u have re lease d the acce lera ­
tor pedal.
If t he engine speed limi tat ion was act iva ted
b y an engine cont rol m alfunc tio n, the ~ indi­
cator light also turns on. Make sure the en ­
gine speed does not go above the speed dis­
played, fo r example when downshifting . Drive
to yo ur authorized Aud i dea le r or qualified re ­
pair facility immediately to have the malfunc­
tion corrected .
~. Engine oil level (min.)
El Check oil level
•

24 Instruments and indicator lights
You may continue driving for the time being .
Check the oil level as soon as possible
¢ page 212.
-If the engine oil level is too low, add engine
oi l
¢ page 215.
-If the engine oil level is correct and the indi­
cator light still turns on, drive at low engine
speed to the nearest authorized Audi dea ler
or qualified repair facility.
_..,. Engine oil sensor
II Oil level sensor: system fault!
The sensor to check the engine oil level has
failed. Drive to an authorized Audi dealer or
qua lified repair faci lity immediately to have
the malfunction corrected.
Q;) Note
Pay attention to the description in the
Owner 's Manual
¢ page 215 and
¢ page 215, Adding engine oil "l::;1:.
Bil Tank system
RD Please refuel
When the indicator light turns first turns on
and this message appears, the tank contains
the following amount of fuel:
- Front wheel drive : approximately 1.8 gal­
lons (7 liters)
- All wheel drive: approximately 2.2 gallons
(8 .5 liters)
RD Fuel tank malfunction! Please contact
Service
If the indicator light turns on and this mes­
sage appears, there is a ma lfunction in the
tank system.
Drive to your authorized Aud i dealer or quali­
fied repair facility immediately to have the
malfunction corrected.
@) For the sake of the environment
Fuel should never enter the sewer system
or come into contact w ith the ground.
(D Tips
More information on refueling is available
on page ¢
page 207.
~ Washer fluid level
m Please add washer fluid
Fill the washer fluid with the ignition switched
off ¢
page 224.
• Windshield wipers
m Windshield wiper: system fault!
There is a malfunction with the windshie ld
wipers .
Drive to your authorized Audi dealer or quali­
fied repair facility immediate ly to have the
malfunction corrected.
~ Defective light bulb warning
Applies to vehicles: wit h drive r info rmatio n system
If the S:i indicator light turns on, a bulb has
failed. The message ind icates the location of
the bulb .
Replace the bulb immediately.
Vehicle lights: system fault!
There is a malfunction in the headlights or
light switch. Drive to an author ized Audi deal­
er or qualified repair facility immediately to
have the malfunction corrected.
_&. WARNING
- Light bulbs are under pressure and can
explode when bu lbs are replaced -risk of
inj ury.
- With gas-discharge lamps* (xenon head­
lights), the high -voltage component
must be hand led appropriate ly. Other­
wise, there is a risk of fatal injury.
-

~(D Dynamic headlight range control
system
App lies to vehicles: with Xe non lig hts
II Headlight range control system: system
fault!
There is a malfunct ion i n the dynam ic head ­
light range con trol system, wh ich may cause
g la re for other drivers.
D rive to you r autho rized Aud i dea le r o r quali­
fied repair faci lity immediately to have the
mal funct ion cor rected.
l§O Audi adaptive light
Applies to vehicles: with Audi adaptive light
rDI Audi adaptive light: system fault!
There is a malfunct io n in the adaptive lights.
The headlights still function.
Drive to an authorized Aud i dealer or qualified
repair facility immediately to have the mal­
function corrected .
@) Light/rain sensor
Applies to vehicles: with light/ra in se nsor
El Automatic headlights: system fault!
El Automatic wipers: system fault!
The light/rain sensor is not working.
F or safety reasons , the low beams are turned
on permanent ly with the switch in
AUTO. You
can continue to turn the lights on and off us­
ing the light switch. You can still control all
wiper functions that are independent of the
rain sensor.
Drive to an authorized Audi dea ler or qualified
repair facility immediately to have the mal­
function corrected .
Q Adaptive dampers
Applies to vehicles: with Audi drive select
II Suspension: system fault!
There is an adaptive damper malfunction.
Instruments and indicator lights 25
Drive to an authorized A udi dealer or qualified
repair facility immediately to have the mal­
function corrected .
¢i Q Turn signals
If the B or 1B in dicator light blinks, a turn
s ignal is turned on. If both indicator lights are
blinking, the emergency flashers are on.
In an indicator light blinks twice as fast as
usual then a blinker bulb has failed. Carefully
drive to your author ized Audi dealer or quali­
fied repa ir facility immed iately to have the
malfu nction corrected . T he indicator light
does not indicate a malfunction if a turn sig­
nal on the trailer or on the vehicle fails when
towing a trailer.
(D Tips
For more information on the turn signals,
see
~ page 44.
{d i~ Rear safety belt
App lies to vehicles: with rear safety belt detection
The IJ ;ffl i ndicator light turns on briefly
when you swi tch the ignition on.
An indica tor light turns on briefly when the
safety belt in the rear seat is buckled or un­
buckled.
l!I -if the ind icator light turns on briefly, the
r ear seat is not occupied or the safety belt is
not buckled . Th ere is also an audio warning
signal if the be lt is unbuckled whi le driving.
II -if the ind icator light turns on briefly, the
r ear safety belt is buckled.
{D Tips
For additional information on safety belts,
refer to~
page 131.
•

26 Driver information system
Driver information
system
Overview
Fig . 10 In strument cluster : dr iver info rm ation system
(ex am ple)
Data is automatically recorded, processed and
d isplayed in the dr iver information system.
Sett ings for spec ial equipment can be adjust­
ed in the
MMI. Select the Systems or Car sys ­
t e ms
menu.
Introduction
The driver information system is controlled
through the multifunction steering wheel
r::;, page 2 7, fig . 11 .
The driver information system
c:> fig. 10 con­
tains the follow ing informat ion:
- @ Tab (register)
-® Vehicle information
-© Status line (se lector lever position, sh ift
indicator, outside temperature
c:> page 11)
- @ On-board comp uter
The following functions are possible, depend ­
ing on veh icle equipment: @
®
First tab ~ Vehicle
functions:
On-board computer, time , date
c:> page
27
Efficiency program
c:> page28
Digital tachometer
Assistant
Audi adaptive cruise control*
c:> page 82
Audi active lane ass ist*
r::;, page 94
Reduced display
Second
ti & Dr iver messages and indicator
tab lights
c,,..c Service reminder indicator
r::;, page 13
Third
fl I I Audio/ ('l) Radio
tab
F ourth .,..,.
Telephone*
tab
Fifth tab
~I~ Navigation*
The second tab is only visible if at least one in­
dicator light or message is shown or if that
system is switched on .
Display
In the driver information system you will see:
Radio station or CD
Time and date
r::;, page 10
Odometer, trip odometer
r::;, page 11
Outside air temperature
r::;, page 11
Service interval display
r::;, page 13
Indicator lights and messag-
r:!:> page 14
es
Digital tachometer
Cruise control system c:>page
79
Speed warn ing r::;, page 79
Transmission shift indicator c:>page 12
Selector lever positions
r::;, page 105
Rear safety belt detection* c:>page25
On-board computer display
r::;, page 2 7

28 Driver information system
• To access additional in formation be low or
above, rotate the thumbwheel @dow n or
up .
• To confirm a se lection, press the thumb­
whee l@ .
• To select a fu nction programmed to a steer ­
i ng w heel button, p ress the bu tto n@ . Fo r
additional information, see
9 page 28, As­
signing a fun ction to the programmable
s teering wheel button.
Calling up the Vehicle functions
> Se lect t he first tab w ith the button @.
• Pr ess the button @. The
Vehicle functions
me nu is displayed 9 fig . 12 .
• To se lec t a menu item, turn and p ress the
t hu mbwheel @.
Resetting values to zero
• In the Vehicle functions menu, se lect On­
board computer or Efficiency program .
• Se lect a va lue in th e desired t rip comput er
o r i n the efficiency program.
• To reset the va lues i n a memo ry, press and
ho ld the thumbwhee l@ for one second.
Recalling indicator lights and messages
.. Pr ess the button CD repeate dly until the a
ta b appears .
The
U tab is only vis ible whe n there is a mal­
f u nction.
Assigning a function to the
programmable steering wheel button
> Se lect: I MENU I button > Systems or Car Sys ­
tems
> Vehicle s ettings > Steering wheel
button programming .
The U tab is only visible whe n there is at
least one i ndicator light/driver message is d is ­
p layed .
@ Tips
-If the vehicle battery is d iscon nected, all
memo ry values are e rased .
- Informati on on the efficiency program
¢ page 28.
- There is more in formation on the m ulti ­
function stee ring w heel in the MMI own­
er's manua l.
Efficiency program
Description
Applies to vehicles: wit h driver informat ion system
Fig . 13 Instrume nt cluster: effi cie ncy progra m (exa m­
p le)
Calling up the efficiency program ii
• Call up the veh icle func tions by press ing the
bu tton @
9 page 2 7, fig. 1 1 and select the
menu item
Efficiency program 9 page 28.
The effici ency program ca n he lp you to use
less fue l.
It evaluates d riving info rmation in
refe ren ce to f uel consum ption and shows ot h­
er equipment in fluencing cons umption
9 page 2 9. Fuel economy messages
9 page 29 prov ide t ips for efficie nt dr iv ing .
T he efficiency progr am uses di stance and co n­
s u mp tion da ta from trip compu ter
1. If the
da ta a re de leted in the e fficiency program
9 page 28, those values a re a lso reset i n trip
computer
1.

Other equipment
Applies to vehicles: with driver information system
Fig. 1 4 Instrument cluste r: other e quipmen t (e xam­
p le)
~ Turn the menu thumbwheel@¢page 27,
fig. 11 while in the efficiency program until
t h e other eq uipme nt affect ing consump tion
appears .
Other equipmen t that is curren tly affecting
fuel cons umption is listed in t he eff iciency
p rog ram. The display shows up to three other
items of equipment @. The equipment using
the most f uel is listed first . If more than thr ee
items us ing fue l are switched on, the equip­
ment that is cu rrently using the most fuel is
d isplayed .
A scale @ also shows the current total con ­
sumpt ion of all other equipment .
Fuel economy messages
Applies to vehicles: with driver information system
Fi g. 15 Instrum ent clus ter: e conomy m essa ge (e xam­
p le)
Fue l economy messages are displayed when
fuel consumption is increased by certain con ­
d itions .
If you follow these fuel economy mes­
sages, you can reduce your vehicle's cons ump­
tion of fuel. The messages appear automati-
Dr iver in formation system 29
ca lly and are only displayed in the efficiency
program . The fue l economy messages t urn off
automat ica lly after a certain per iod of t ime .
~ To turn an economy message off immed iate­
ly a fter it appears, press any button on the
mu ltifunction steer ing wheel.
(D Tips
- Once yo u have tur ned a fuel economy
message off, it will o nly appea r again af­
ter you turn the ignition on again.
- T he f ue l economy messages are not dis ­
played in every instance, but rather in in ­
tervals over a period of t ime.
On-Board Diagnostic
system (OBD)
Malfunction Indicator Lamp (MIL )
The Ma lfunction Indicator Lamp (MIL) ¢• in
the instr ument cluste r is part of the On-Board
Diagnost ic (O8D
II) system .
T he warning/i ndicator light ill uminates when
the ignit ion is switched on and goes out after
the engine starts and the id le has stabilized .
This indicates that the MIL i s working proper­
ly.
If the light does not go out after the engine
is started, or illuminates while you are driv­
ing, a malfunction may exist in the engi ne sys­
tem.
If t he light illuminates, the ca talytic con­
verter could be damaged .
Continue driving
with reduced power (avo id­
ing sustained high speeds and/or rapid accel­
erations) and have the cond ition corrected .
Contact your authorized Audi dea ler .
I f the light illuminates, the electronic speed
limiter may also be malfunct io ning . For more
informa tion
c> page 30 , Electronic speed
limiter* .
If the fuel filler cap is closed incorrectly, this
may also cause the MIL to turn on
c> page208.

(D Tips
If you vehicle is left standing for a long pe­
riod of t ime, note the following:
- The proximity sensor sw itches off afte r a
few days to save energy. You then have
to pull once on the door hand le to unlock
the vehicle and a second time to open it.
- To prevent the battery from draining and
to retain the start ing ability of your vehi­
cle as long as poss ible, the energy man­
agement system gradually tuns off un­ necessary convenience functions You
may not be able to unlock your vehicle
using the convenience key.
- For Declaration of Compliance to United
States FCC and Industry Canada regula­
tions, see
r:o page 2 71.
Unlocking /locking with the key
In the event that the power locking system
fails, the driver's door can locked and un­
locked using the door lock .
Fig . 21 Driver's door: door lock
• To un lock the driver's door, t urn the key to
the open position @.
• To lock the driver's door, move the selector
lever to the P position (automatic transmis­
s ion) and turn the key once to the close posi­
t ion @.
The settings in the MMI specify if the entire
vehicle or one of the doors is unlocked
i:::o page36 .
Openin g an d clos ing 35
@ Tips
Additional remote control key or conven­
i ence key functions~
page 39, Conven-
ience opening/closing.
Central locking switch
Fig . 22 Driver's door: centra l locking switch
• To lock the vehicle, press the [§] button
q ,&..
• To unlock the vehicle, press the Im button
r=ofig.22.
When locking the vehicle with the centra l
locking switch, the following applies:
- Opening the doo r and the luggage compart­
ment lid from the
outside is not possib le
(for security such as when stopped at a
light).
- The LED in the central locking switch turns
on when all doors are closed and locked.
- Yo u can open the doo rs individually from the
inside by pulling the doo r handle.
- In the event of a crash w ith airbag deploy­
ment, the doo rs unlock automat ica lly to al ­
low access to the vehicle.
A WARNING
- The power lock ing switch works with the
ignit ion off and a utomatica lly locks the
entire veh icle when the [§] button is
pressed.
- The central locking switch is inoperative
when the vehicle is locked from the out­ side.
- Locked doors make it more difficult for
emergency workers to get into the veh i-
cle, which puts lives at risk. Do not leave ..,

Opening th e windows
"' Press the sw itch to the fir st sto p and hold i t
until the window reaches the desi red posi ­
tion .
"' Press the switch briefly to the
se cond stop
to automatic ally open the window .
Clos ing th e windows
"' Pull the swi tch to t he fir st sto p and hold it
until the window reaches the desi red posi ­
tion .
"' Pull the switch briefly to the
sec on d s top to
automatica lly close the window .
Pow er wi nd ow switch es
@ Sw itch c::> fig. 2 7 f or the window in the
driver's door.
@ Sw itch for the window in the fron t pas­
senger 's door .
© Switch for the window in the left rear
door.
@ Sw itch for the window in the r ight re ar
door.
® Safety bu tton* .
Child safe ty lock
When the safety button® c::> fig. 2 7 is press­
ed, the~ symbol in the button lights up . The
power w indow switches in the rear doors are
switched off.
A WARNING
- Always remove the ignition key when you
leave your vehicle, even for a short peri­
od of time . This applies particularly when
children remain in the vehicle . Otherwise
the chi ldren could start the engine or op­
erate electrical equ ipment such as power
windows. The power windows continue
to function unt il the driver 's door or
front passenger's door has been opened .
- Pay carefu l attent ion when closing the
window . It could cause injury by pinch­
ing.
- When locking the veh icle from outs ide,
the vehicle must be unoccupied s ince the
Opening and clo sin g 39
windows can no longer be opened in an
emergency.
(D Tips
After turning the ignition off you can s till
open and close the windows for approxi­ mately 10 seconds. The power windows
are not switched off until the driver's door
or front passenger's door has been
opened .
Convenience opening/closing
With the convenience open ing/closing func­
tion, you can centrally and eas ily ope n the
windows and the pano rama sunroof* from the
o utside.
Convenienc e opening
"' Press the open button~ on the remote con ­
trol key u ntil all w indows and the panorama
sunroof* have reached the desired position,
or
"' First unlock the vehicle using the open but­
ton
Im on the remote cont ro l key and then
keep the key in the lock on the driver's door
until a ll windows and the and the panorama
sunroof* have reached the desired position .
Conven ience closing
"' Hold the key in the lock on the drive r's door
i n the closed position unt il a ll windows and
the panorama sunroof * are closed.
Adjusting the convenience opening in the
MMI
"' Select: !MENU I > button System s contro l
button or
Car s ystems > Vehicle settings >
C entral locking > Open windows b y press­
ing long
or > F ront windo ws on /off or Roof
on /off *.
A WARNING
- Be careful when clos ing the windows and
panorama sunroof* - the re is a risk of in-
Jury.
li1'-
•