2015.5 VAUXHALL ADAM Owner's Manual

Technical data215Engine dataSales designation1.01.01.21.4
Engine identifier code
B10XFLB10XFTA12XELA14XEL
B14XELNumber of cylinders3344Piston displacement [cm 3
]99999912291398Engine power [kW]66855164at rpm3700-60005000-600056006000Torque [Nm]170170115130at rpm1800-37001800-450040004000Fuel typePetrolPetrolPetrolPetrolOctane rating RONrecommended95959595possible98989898possible91919191Gas––––Engine oil consumption [l/1000 km] 2)0.60.60.60.62)
Maximum value.

216Technical data
Sales designation1.4 LPG1.4Adam SEngine identifier codeB14XELA14XERB14NEHNumber of cylinders444Piston displacement [cm3
]139813981362Engine power [kW]6474110at rpm5200-600060005000Torque [Nm]130 3)130220at rpm400040003000-4500Fuel typeLiquid Gas/PetrolPetrolPetrolOctane rating RONrecommended959598possible989895possible919191GasLPG––Engine oil consumption [l/1000 km] 4)0.60.60.63)
LPG operation: 125.
4) Maximum value.

Technical data217PerformanceEngineB10XFLB10XFTA12XEL
A14XEL
B14XELB14XEL
LPG
A14XERB14NEH
Maximum speed 5)
[mph]Manual transmission112122103109109115130Manual transmission automated–––110–––5) The maximum speed indicated is achievable at kerb weight (without driver) plus 200 kg payload. Optional equipment could reduce the specified maximum
speed of the vehicle.

218Technical dataVehicle weight
Kerb weight, basic model without any optional equipmentEngineManual transmissionManual transmission automatedwithout/with air conditioning
[kg]B10XFL1141/1156–B10XFT1141/1156–A12XEL1086/1101–A14XEL1120/1135–B14XEL1120/11351120/1135B14XEL
LPG1163/1178–A14XER1120/1135–B14NEH1163/1178–
Optional equipment and accessories increase the kerb weight.
Loading information 3 70.

Technical data219Vehicle dimensionsLength [mm]3747Width without exterior mirrors [mm]1720Width with two exterior mirrors [mm]1966Height (without antenna) [mm]1475-15086)Length of load compartment floor [mm]462Length of load compartment with folded rear seats [mm]1041Load compartment width [mm]954Load compartment height [mm]874Wheelbase [mm]2311Turning circle diameter [m]10.17-11.06 6)6)
Depending on equipment.

220Technical dataCapacitiesEngine oilEngineB10XFLB10XFTA12XELA14XEL
B14XELB14XEL
LPGA14XERB14NEHincluding Filter [l]4.04.04.04.04.04.04.0between MIN and MAX [l]1.01.01.01.01.01.01.0
Fuel tank
EngineB10XFLB10XFTA12XELA14XEL
B14XELB14XEL
LPGA14XERB14NEHPetrol, refilling quantity [l]35353535353535LPG, refilling quantity [l]––––35––

Technical data221Tyre pressuresComfort with up to 3
peopleECO with up to 3 peopleWith full loadEngineTyresfrontrearfrontrearfrontrear[kPa/bar]
([psi])[kPa/bar]
([psi])[kPa/bar]
([psi])[kPa/bar]
([psi])[kPa/bar]
([psi])[kPa/bar]
([psi])B10XFL,
B10XFT,
A12XEL,
A14XEL,
B14XEL,
B14XEL LPG,
A14XER,
B14NEH175/70 R14,
185/70 R14,
185/60 R15,
185/65 R15,
195/55 R16,
215/45 R17,
225/35 R18220/2.2 (32)200/2.0 (29)290/2.9 (42)270/2.7 (39)260/2.6 (38)320/3.2 (46)AllTemporary spare wheel420/4.2 (61)420/4.2 (61)––420/4.2 (61)420/4.2 (61)

222Customer informationCustomer informationCustomer information................222
Vehicle data recording and pri‐ vacy ........................................... 223Customer information
Declaration of conformity Transmission systems
This vehicle has systems that
transmit and/or receive radio waves
subject to Directive 1999/5/EC.
These systems are in compliance with the essential requirements and
other relevant provisions of Directive
1999/5/EC. Copies of the original
Declarations of Conformity can be
obtained on our website.
Jack
Translation of the original declaration
of conformity
Declaration of conformity according
to EC Directive 2006/42/EC
We declare that the product:
Product designation: Jack
Type/GM part number: 13331922 is in compliance with the provisions of
Directive 2006/42/EC.Applied technical standards:GMN9737=JackingGM 14337=Standard
Equipment Jack –
Hardware TestsGMN5127=Vehicle Integrity –
Hoisting and
Service Station
JackingGMW15005=Standard
Equipment Jack
and Spare Tyre,
Vehicle TestISO TS 16949=Quality
management
systems
The signatory is authorised to
compile the technical documentation.
Rüsselsheim, 31st January 2014
signed by
Hans-Peter Metzger
Engineering Group Manager Chassis
& Structure
Adam Opel AG
D-65423 Rüsselsheim