2015.5 Citroen DS5 RHD audio

1
1
1
19
20
21
22
23
24
25
26
57 Audio and Telematics


Level 1
Level 2
Level 3
Comments

Te l e p h o n e

connection



Secondary page



Bluetooth
connection

Search
Start the search for another peripheral device to
connect.

Connect
/
Disconnect
Start or stop theBluetooth connection to the
selected peripheral device.

Update
Import the contacts from the selected telephone
to store them in the audio system.

Delete
Delete the selected telephone.

Confirm
Save the settings.

Te l e p h o n e

conn

ection



Secondary page



Search
for devices

Devices detected
Te l e p h o n e
Start the search for peripheral devices.
Audio streaming
Internet

Te l e p h o n e

connection



Secondary page



Telephone Options

Put on hold
Cut the microphone temporarily so that the
contact cannot hear your conversation with a
passenger.

Update
Import the contacts from the selected telephone
to save then in the audio system.

Ringtones
Choose the telephone ringtone and volume.

Memory info.
Contact records used and free, percentage of
storage space used by internal contacts and
Bluetooth contacts.

Confirm
Save the settings.

1
19


















Pairing a Bluetooth ®

telephone

For reasons of safety and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary
.


Procedure (short) from the
telephone


In the Bluetooth menu of your device, select the
system name in the list of devices detected.

Enter a code of at least 4 figures in the device
and confirm.

Enter this same code in the system,
select " OK
" and confirm.


Procedure from the system


Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).

Press on Te l e p h o n e
to display the
primary page.

Press on the secondary page.

Select " Bluetooth connection
".

Select Search for devices
.
The list of telephones detected is
displayed.


If the telephone is not detected, it is
recommended that you switch the Bluetooth
function on your telephone off and then on again.


Select the name of the
desired peripheral from the
list and " Confirm
".

Enter a code of at least 4 figures for
the connection then " Confirm
".

Enter this same code in the telephone then
accept the connection.

The system offers to connect the telephone:


- in " Te l e p h o n e
" (hands-free kit, telephone
only),

- in " Audio streaming
" (streaming: wireless
playing of audio files from the telephone),

- in " Internet
" (internet browsing, only if your
telephone is compatible with the "DUN"
Dial-Up Networking Bluetooth standard).
Select one or more profiles and confirm.

1
19
59 Audio and Telematics


The ser vices available depend on
the network, the SIM card and the
compatibility of the Bluetooth telephone
used. Check the telephone manual and
with your network provider for details of
the services available to you.

The ability of the system to connect
with only one profile depends on the
telephone. The three profiles may all
connect by default.

Visit www.citroen.co.uk for more information
(compatibility, additional help, ...).

The recognised telephone
appears in the list.

Depending on your telephone, you may be
asked to accept automatic connection every
time the ignition is switched on.
On return to the vehicle, if the last telephone
connected is present again, it is reconnected
automatically and within around 30 seconds
after switching on the ignition the pairing is
done without any action on your part, with
(Bluetooth activated).
To modify the automatic connection mode,
select the telephone in the list then select the
desired profile.

Depending on the type of telephone,
the system will ask you to accept or not
the transfer of your contacts.
If not, select " Update
".


















Connecting a Bluetooth ®

peripheral device

Automatic reconnection


On switching on the ignition, the telephone
connected when the ignition was last switched
off is automatically reconnected, if this
connection mode had been activated during the
pairing procedure.

The connection is confirmed by the display of a
message and the name of the telephone.


Manual connection


Press on Te l e p h o n e
to display the
primary page.

Press on the secondary page.

Select " Bluetooth
" to display the list
of paired peripherals.

Select the peripheral to connect.

Press on " Search for devices
".

The connection is confirmed by the display of a
message and the name of the telephone.

3
2
3
9
14
15
16
17
18
61 Audio and Telematics


Select " Contacts
".

Select the desired contact from the list offered.

Select " Call
".




Calling a recently used number


Press on Te l e p h o n e
to display the
primary page.

Select " Call log
".

Select the desired contact from the list offered.

It is always possible to make a call
directly from the telephone; park the
vehicle first as a safety measure.



Managing contacts / entries


Press on Te l e p h o n e
to display the
primary page.

Select " Contacts
".

Select " View
".

Select " Create
" to add a new contact.

Or

" Modify
" to edit the selected contact.

Or

" Delete
" to delete the selected
contact.

Or

" Delete all
" to delete all information
for the selected contact.
Select " By name
" to view the list of
contacts.

The following table groups together the answers to the most frequently asked questions concerning your audio system.



QUESTION



ANSWER



SOLUTION


The route calculation is
not successful. The route settings may conflict with the current location (exclusion
of toll roads on a toll motor way). Check the route settings in the "Navigation"
menu.
The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs.
The Risk areas audible
warning does not work. The audible warning is not active. Activate audible warnings in the "Navigation"
menu.
The system does not
suggest a detour around
an incident on the route. The guidance criteria do not take account of TMC messages. Select the "Information" function in the list of
route settings.
I receive a Risk areas alert
which is not on my route. Other than guidance, the system announces all Risk areas
positioned in a cone located in front of the vehicle. It may provide
an alert for Risk areas located on nearby or parallel roads. Zoom in on the map to view the exact position of
the Risk areas. Select "On the route" to no longer
receive alerts other than navigation instructions
or to reduce the time for the announcement.
Frequently asked questions


Navigation

63 Audio and Telematics



QUESTION



ANSWER



SOLUTION


Certain traffic jams along
the route are not indicated
in real time. On starting, it is several minutes before the system begins to
receive the traffic information. Wait until the traffic information is being received
correctly (display of the traffic information icons
on the map).
The filters are too restrictive. Modify the settings.
In certain countries, only major routes (motor ways...) are listed for
the traffic information. This phenomenon is normal. The system is
dependent on the traffic information available.
The altitude is not
displayed. On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly. Wait until the system has started up completely
so that there is GPS coverage by at least
4 satellites.
Depending on the geographical environment (tunnel...) or the
weather, the conditions of reception of the GPS signal may vary. This phenomenon is normal. The system
is dependent on the GPS signal reception
conditions.

Radio



QUESTION



ANSWER



SOLUTION


The quality of reception of
the radio station listened
to gradually deteriorates
or the stored stations do
not function (no sound,
87.5 Mhz is displayed...). The vehicle is too far from the transmitter used by the station
listened to or there is no transmitter in the geographical area
through which the vehicle is travelling. Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more power ful transmitter in
the geographical area.
The environment (hills, buildings, tunnels, basement car parks...)
block reception, including in RDS mode. This phenomenon is normal and does not
indicate a fault with the audio system.
The aerial is absent or has been damaged (for example when going
through a car wash or into an underground car park). Have the aerial checked by a CITROËN dealer.
I cannot find some radio
stations in the list of
stations received. The station is not received or its name has changed in the list. Press and hold the "List" button at the steering
mounted controls to update the list of stations
received or press on the system update function:
"Update list". Some radio stations send other information in place of their name
(the title of the song for example).
The system interprets this information as the name of the station.
The name of the radio
station changes.

65 Audio and Telematics


Media



QUESTION



ANSWER



SOLUTION


Playback of my USB
memory stick starts only
after a very long wait
(around 2 to 3 minutes). Some files supplied with the memory stick may greatly slow down
access to reading the memory stick (multiplication by 10 of the
catalogue time). Delete the files supplied with the memory stick
and limit the number of sub-folders in the file
structure on the memory stick.
When I connect my iPhone
as a telephone and to
the USB port at the same
time, I am unable to play
the music files. When the iPhone connects automatically as a telephone, it forces
the streaming function. The streaming function takes the place
of the USB function which is then not useable, there is a period
without sound of the track being played with Apple
® players. Disconnect and reconnect to the USB port (the
USB function takes priority over streaming).
The CD is ejected
automatically or is not
played by the player. The CD is inserted upside down, is unplayable, does not contain any
audio data or contains an audio format which the player cannot play.

- Check that the CD is inserted in the player
the right way up.

- Check the condition of the CD: the CD
cannot be played if it is too damaged.

- Check the content in the case of a recorded
CD: refer to the advice in the "AUDIO" section.

- The audio system's CD player does not play
DVDs.

- Some recorded CDs will not be played by
the audio system because they are not of the
correct quality.

The CD has been recorded in a format that is not compatible with the player (udf, ...).

The CD is protected by an anti-pirating protection system which is
not recognised by the audio system.
There is a long waiting
period following the insertion
of a CD or connection of a
USB memory stick. When a new medium is inserted, the system reads a certain
amount of data (directory, title, artist, etc.). This may take from a few
seconds to a few minutes. This phenomenon is normal.