160
Berlingo-2-VP_en_Chap07_Verification_ed02-2015
Checks
Berlingo-2-VP_en_Chap07_Verification_ed02-2015
Good practice
Only use products recommended by CITRo Ë n or products of equivalent
quality
and specification.
In
order to optimise the operation
of
units as important as the braking
system,
CITROËN selects and offers
specific
products.
Bleeding water from the Diesel
filter Manual gearbox
Have the level checked in accordance with the
manufacturer's servicing schedule.
In order to avoid damaging the electrical units, high pressure
washing to clean the engine
compartment
is strictly prohibited.
After
washing the vehicle dampness,
or
in
winter, ice may form on the brake
discs
and pads: braking efficiency may
be
reduced. Make some light brake
applications to dry and de-ice the
brakes.
If
this
warning
lamp
comes
on,
bleed
the
filter.
Otherwise
bleed
regularly
each
time
the
engine
oil
is
changed.
H
d
i engines use advanced
technology.
All
work
requires
special training, so should be
entrusted
to
a
CITROËN
dealer.
Depending
on
country
of
sale.
To drain the water, unscrew the bleed
screw
located
on
the
filter.
o
perate until all of the water no longer
flows
in
the
transparent
pipe,
then
tighten
the
bleed
screw.
DIESEL
162
Berlingo-2-VP_en_Chap07_Verification_ed02-2015
Fuel
Berlingo-2-VP_en_Chap07_Verification_ed02-2015
FUEL CUT- OFF
In a serious collision, a mechanism automatically
prevents fuel from
reaching
the engine.
The
flashing of this warning
lamp
is accompanied by a
message
in the screen.
Check
that there is no odour or
leakage
of fuel outside the vehicle and
re-establish
the fuel supply:
-
switch of
f the ignition
(ST
o
P
position),
-
remove
the key,
-
put
the key back in the ignition,
-
switch
on the ignition and start.
DIESEL PRIMING PUMPFuel used for Diesel engines
The Diesel engines are compatible with biofuels
which conform to current and
future European standards (
d iesel fuel
which
complies with standard EN 590
mixed
with a biofuel which complies
with standard E
n 14214) available at
the
pumps (containing up to 7 % Fatty
Acid
Methyl Ester).
B30 biofuel can be used in certain
Diesel
engines. However, this use,
even occasional, requires strict
application of the special servicing
conditions.
Contact a CITROËN dealer
or
a qualified workshop.
The use of any other type of (bio)fuel
(vegetable or animal oils, pure or diluted, domestic
fuel...) is strictly prohibited
(risk
of damage to the engine and fuel
system).
If you run out of fuel, it is necessary to
prime the fuel circuit.
Other HDi engines
- Fill the fuel tank with at least five litres
of Diesel.
-
Squeeze
and release the manual
priming
pump, under the bonnet,
under
the protective cover.
-
o perate the starter until the engine
starts.
BlueHDi engine
- Fill the fuel tank with at least five litres
of Diesel.
-
Switch on the ignition (without
starting
the engine).
-
W
ait around 6 seconds and switch
of
f the ignition.
-
Repeat
the operation 10 times.
-
o perate the starter to run the
engine.
