Assigning driver seat and outside mirror settings to a vehicle key 
The memory function of all vehicle keys is disabled when the vehicle is first delivered from the factory. 
To enable vehicle key memory function: 
 x Unlock the driver door. 
 x Press and hold a memory button until memory position is reached. 
 x Press and hold the unlock button  0 on the vehicle key and then press the desired memory button at the same time within about 3 seconds. A chime sounds to confirm activation. 
To disable vehicle key memory function: 
 x Press and hold the  3 % 4 button. 
 x Press and hold the unlock button  0 on the vehicle key and the desired memory button at the same time within about 10 seconds. A chime sounds to confirm deactivation. 
Assigning settings to an additional vehicle key 
 x Follow the instructions ⇒ Assigning memory seat settings to the remote control vehicle keys to assign the driver seat and outside mirror settings to the vehicle key. 
 x Unlock the vehicle with the same vehicle key. 
 x Adjust driver seat and outside mirrors. 
 x Lock the vehicle with locking button  1 in the vehicle key to store the settings. 
Once the settings are stored, the driver seat and the outside mirrors move to the stored positions whenever the vehicle is unlocked with the  0 button on the vehicle key (or unlocked with the door handle sensor on vehicles with Keyless Access) and the driver door is opened. If 2 people use the vehicle, each of them should always use the key in which his or her personal settings have been stored. 
Initializing the memory seats 
The memory system must be initialized by an authorized Volkswagen dealer, an authorized Volkswagen Service Facility, or another qualified workshop in certain situations, for instance, if a new driver seat is installed. 
Initializing clears all memories and assignments of the memory seats. After that, memory buttons can be reprogrammed and assigned to a vehicle key. 
 x Open the driver door but do not enter the vehicle. 
 x Adjust the seats from the outside. 
 x Move the angle of the backrest forward as far as it will go. 
 x Release the backrest adjustment switch and press it again until you hear a chime sound. 
Cancellation conditions when storing settings for the memory buttons 
When one of the following conditions is met, the storing process will be cancelled: 
 x Charging condition of the vehicle battery is weak. 
 x Repeated pressing of the SET button within about 10 seconds. 
 x Readjustment of the seat position within about 10 seconds after pressing the  SET button.  
 
Warning messages 
When the ignition is switched on, several warning and indicator lights come on briefly for a function check. They go out after a few seconds. 
Warning lights and text messages are shown in the instrument cluster display. Acoustic warnings may also sound at the same time. 
 
Lights up Warnings in the instrument cluster display Proper response 
∋ Fault in the hybrid system: stop the vehicle at a safe location! Stop the vehicle in a safe place as soon as it is safe to do so. 
∋ 
Fault in the hybrid system: Workshop! See an authorized Volkswagen dealer or an authorized Volkswagen Service Facility. 
Hybrid battery is charging, leave engine running. While this message appears, do not stop the engine. 
 2 % ! $ 9 Electric drive is READY. 
Never leave the vehicle parked in the ready position. Remove the remote control vehicle key out of the ignition or for vehicle with Keyless Access press the starter button. When leaving the vehicle always take the remote control vehicle key with you. 
 %