Please carry out each step only in the order specified:
11. Check if the bulb is installed securely.
12. Connect the connector (1) on the bulb so that it clicks into place.
13. Insert the light into the bumper.
14. Install the screws ⇒ fig. 199 (2).
15. Insert the cover in the bumper opposite the direction indicated by the arrow . The cover must click into place securely.
16. Make sure the cover is installed securely.
The illustrations show the right fog light. The left fog light is arranged as a mirror image of the right.
Replacing taillight bulbs in the luggage compartment lid
Fig. 201 In the luggage compartment lid: Removing the cover.
Fig. 202 In the luggage compartment lid: Removing the bulb holder.
