2014 VOLKSWAGEN BEETLE Warning light

[x] Cancel search: Warning light

Page 200 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
To release the ASL, depress and hold the brake pedal with the ignition switched on. Press the release button on the selector lever at the same time. 
The ASL is not engaged if the selector lever is

Page 206 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
Lights up Possible cause  Proper response 
�D 
Power steering assist is reduced. 
Stop, restart the engine, and drive a short distance. If the yellow warning light does not come on again, you do not

Page 207 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
To help make it more difficult to steal your vehicle, you should always make sure the steering column is locked before leaving the vehicle. 
Electronic steering column lock 
Vehicles with Keyless Ac

Page 209 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
  WARNING 
Parking improperly can cause serious personal injury. 
�x Never remove the key from the ignition switch while the vehicle is moving or rolling to a stop. The steering wheel will lock and

Page 211 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
  WARNING 
Driving with bad brakes can cause a collision and serious personal injury. 
�x If the brake warning light �"�2�!�+�% or �H does not go out, or comes on when driving, either the brake flui

Page 214 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
Brake system malfunction 
If you brake and find that the vehicle doesnt brake nearly as well as it used to (sudden increase in stopping distance), a brake circuit may have failed. The brake warning

Page 227 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
 
When the ignition is switched on, several warning and indicator lights come on briefly for a function check. They go out after a few seconds. 
Display 
Different cruise control versions are availa

Page 237 of 380

VOLKSWAGEN BEETLE 2014 3.G Owners Manual  
Switching Park Distance Control back on after it was switched off reactivates the volume. System malfunction warning signals cannot be switched off. 
If you manually deactivate the display, PDC rema