2014 TOYOTA URBAN CRUISER oil type

231
2-4. Using other driving systems
2
When driving
URBAN CRUISER_OM_OM52F47E_(EE)
■
Replacing the engine oil
Make sure to use an oil of the recommended grade or of matching quality.
(→ P. 514)
CAUTION
■Exhaust pipe
Do not touch the exhaust pipe during cleaning, as the exhaust pipe and
exhaust gases will become particularly hot. Also, make sure that there are
no people or flammable materials near the exhaust pipe while the vehicle is
stopped.
Failure to do so may cause injury by burning or a fire.
NOTICE
■To prevent the DPF system from failing
●Do not use fuel other than the specified type
● Do not use engine oil other than the recommended type
● Do not modify the exhaust pipe

373
4-3. Do-it-yourself maintenance
4
Maintenance and care
URBAN CRUISER_OM_OM52F47E_(EE)
Holding a rag under the end, pull
the dipstick out and check the oil
level.
Low
Normal
Excessive
The shape of the dipstick may dif-
fer depending on the type of vehi-
cle or engine.
Wipe the dipstick and reinsert it fully.
■ Adding engine oil
If the oil level is below or near
the low level mark, add engine
oil of the same type as already in
the engine.
STEP5
STEP6

374
4-3. Do-it-yourself maintenance
URBAN CRUISER_OM_OM52F47E_(EE)
Make sure to check the oil type and prepare the items needed before
adding oil. Remove the oil filler cap.
Add engine oil slowly, checking the dipstick.
Install the filler cap, turning it clockwise.
About 1.5 L (1.6 qt., 1.3 Imp.qt.) is required to raise the oil level from low to
full on the dipstick.
Engine oil selection →P. 5 11
Items Clean funnel
■ Engine oil consumption
A certain amount of engine oil will be consumed while driving. In the follow-
ing situations, oil consumption may increase, and engine oil may need to be
refilled in between oil maintenance intervals.
●When the engine is new, for example dire ctly after purchasing the vehicle
or after replacing the engine
● If low quality oil or oil of an inappropriate viscosity is used
● When driving at high engine speeds or with a heavy load, when towing,
or when driving while accelerating or decelerating frequently
● When leaving the engine idling for a long time, or when driving frequently
through heavy traffic
STEP1
STEP2
STEP3

518
6-1. Specifications
URBAN CRUISER_OM_OM52F47E_(EE)
Differential (4WD models)
Manual transmission
Oil capacity 0.5 L (0.53 qt., 0.44 lmp.qt.)
Oil type and viscosity Hypoid gear oil API GL-5
Above -18 °C (0 °F): SAE90
Below -18 °C (0 °F): SAE80W or
SAE80W-90
Gear oil capacity2.4 L (2.5 qt., 2.1 lmp.qt.)
Gear oil type
Use either of the following:• “TOYOTA Genuine Manual Transmission Gear Oil LV”
• Other gear oil that meets API GL-4 and SAE 75W specifica-
tions
NOTICE
■ Manual transmission gear oil
Please be aware that depending on the particular characteristics of the gear
oil used or the operating conditions, idle sound, shift feelings and/or fuel effi-
ciency may be different or affected. Toyota recommends to use “TOYOTA
Genuine Manual Transmission Gear Oil LV” to achieve optimal performance.

520
6-1. Specifications
URBAN CRUISER_OM_OM52F47E_(EE)
Steering
Transfer (4WD models)
Free playLess than 30 mm (1.18 in.)
Oil capacity0.45 L (0.48 qt., 0.40 lmp.qt.)
Oil typeHypoid gear oil API GL-5
Recommended oil viscosity
Above-18 °C (0 °F): SAE 90
Below-18 °C (0 °F): SAE 80W or
SAE 80W-90

544
URBAN CRUISER_OM_OM52F47E_(EE)
GAS STATION INFORMATION
Fuel filler door P. 105Auxiliary catch lever P. 366
Tire inflation pressure
P. 521
Fuel filler door opener
P. 105
Hood lock release lever
P. 366
Fuel tank capacity (reference) 42 L (11.1 gal., 9.2 lmp.gal.)
Fuel typeGasoline engine P. 107, 510
Diesel engine P. 107, 510
Cold tire inflation pressure P. 521
Engine oil capacity
(Drain and refill —
reference)Gasoline engine L (qt., Imp.qt.)
With filter 3.4 (3.6, 3.0)
Without filter 3.2 (3.4, 2.8)
Diesel engine With filter 3.9 (4.1, 3.4)
Without filter 3.5 (3.7, 3.1)
Engine oil type P. 511