2014 TOYOTA tC ECU

JOBNAME: 1491493-2014stcWG-en PAGE: 6 SESS: 13 OUTPUT: Thu May 2 11:57:44 2013
/tweddle/toyota/sched-maint/1491493-en-stc/wg
THE NEW WORLD OF
ANTI-THEFT
TECHNOLOGY
This Scion vehicle may be equipped
with an electronic “immobilizer”
anti-theft system. When the key is
inserted into the ignition switch it
transmits an electronic code to an
immobilizer computer. The engine will
only start if the code in the key matches
the code in the immobilizer. If the code
does not match, the immobilizer
disables the ignition and fuel systems.
While an exact physical copy of the key
will open the door and allow retrieval of
items locked in the vehicle, it won’t
start the vehicle unless the key has the
same code as the immobilizer.
SECURITY
For security purposes, access to key
codes and service procedures for
electronically registering replacement
keys is restricted. Only an Authorized
Servicing Dealership* or certain
bonded/registered independent
locksmiths can generate replacement
keys.
* For the purposes of this system, an Authorized Servicing Dealership is a Scion dealership or aToyota dealership.
THE IMMOBILIZER KEY
INTRODUCTION
Introduction6

JOBNAME: 1491493-2014stcWG-en PAGE: 7 SESS: 13 OUTPUT: Thu May 2 11:57:44 2013
/tweddle/toyota/sched-maint/1491493-en-stc/wg
REPLACING THE KEY
Upon purchase, each vehicle should
have two master keys and an
aluminum tag with a key-code
imprinted on it.
To generate a fully functional
replacement key (one that will both
open the doors and start the engine),
one of the master keys is required. To
make a key that will open the door for
retrieval of items locked inside the
vehicle, the aluminum key-code tag can
be used. If a master key or the
aluminum key-code tag is not available,
an Authorized Servicing Dealership or
certain registered locksmiths can
obtain the key code from a
restricted-access database. These
businesses can also access a service
utility to reprogram the immobilizer if
all registered master keys have been
lost. If an Authorized Servicing
Dealership is not available, please refer
towww.aloa.org to find a
bonded/registered locksmith who
performs high security key service.
KEEPING THE KEY SAFE
Replacing an immobilizer key may be
costly. It is advisable to keep a spare
master key and the aluminum key-code
tag in a safe place. If you record the
key-code in more than one place, do
not record it in a way that can be easily
identified and associated with the
vehicle. It is wise to keep a copy of the
key-code outside of the vehicle.
If the vehicle was delivered with less
than two keys and the aluminum
key-code tag, consider having an
Authorized Servicing Dealership or a
qualified independent automotive
locksmith make a duplicate key before
you need it.
THE IMMOBILIZER KEY
INTRODUCTION
Introduction7

JOBNAME: 1491493-2014stcWG-en PAGE: 52 SESS: 13 OUTPUT: Thu May 2 11:57:44 2013
/tweddle/toyota/sched-maint/1491493-en-stc/wg
T
he following descriptions are
provided to give you a better
understanding of the
maintenance items that should be
performed on your vehicle. The
scheduled maintenance log indicates at
which mileage/time intervals each item
should be performed. Please note that
many maintenance items should be
performed only by a qualified
technician.
For further information on
maintenance items you can perform
yourself, see the “Vehicle
Maintenance and Care” and
“Do-It-Yourself Maintenance”
sections of the
Owner’s Manual.
Ball Joints and Dust Covers
Check the suspension and steering
linkage ball joints for looseness and
damage. Check all dust covers for
deterioration and damage. Replace any
deteriorated or damaged parts. A
qualified technician should perform
these operations.
Brake Lines and Hoses
Visually inspect for proper installation.
Check for chafing, cracks, deterioration
and signs of leakage. Replace any
deteriorated or damaged parts. A
qualified technician should perform
these operations.
Brake Linings/Drums and
Brake Pads/Discs
Check the brake linings (shoes) and
drums for scoring, burning, fluid
leakage, broken parts and excessive
wear. Check the pads for excessive
wear and the discs for runout,
excessive wear and fluid leakage.
Replace any deteriorated or damaged
parts. A qualified technician should
perform these operations.
Drive Belts
Inspect for cracks, excessive wear and
oiliness. Check the belt tension and
adjust if necessary. Replace the belts if
they are damaged.
Drive Shaft Boots
Check the drive shaft boots and clamps
for cracks, deterioration and damage.
Replace any deteriorated or damaged
parts and, if necessary, repack the
grease. A qualified technician should
perform these operations.
Driver’s Floor Mat
>Only use the driver’s floor mat
designed specifically for the model
and model year of your vehicle.
>Always properly secure the driver’s
floor mat using the retaining hooks.
>Never install another floor mat on
top of the existing driver’s floor mat.
>Never install the driver’s floor mat
upside down.
EXPLANATION OF MAINTENANCE ITEMS
Maintenance Log52
MAINTENANCE