2014 TOYOTA SIENNA jack

[x] Cancel search: jack

Page 672 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 672 4-3. Do-it-yourself maintenance
SIENNA_OM_OM45483U_(U)
CAUTION
■When raising your vehicle
Make sure to observe the following precautions to reduce the possibility of
death or serious injury:
●

Page 761 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 5
When trouble arises
761
5-2. Steps to take in an emergency
SIENNA_OM_OM45483U_(U)
If you have a flat tire (vehicles with standard tires)
Remove the flat tire and replace it with the spare tire provi

Page 762 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 762 5-2. Steps to take in an emergency
SIENNA_OM_OM45483U_(U)
Taking out the jack and toolsRemove the cover.
Remove the adapter socket.
Remove the jack.
STEP1
STEP2
STEP3

Page 763 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 5
When trouble arises
763
5-2. Steps to take in an emergency
SIENNA_OM_OM45483U_(U)
Remove the wheel nut wrench.
Taking out the spare tire
Slide the front passenger’s seat  to the frontmost lock pos

Page 764 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 764 5-2. Steps to take in an emergency
SIENNA_OM_OM45483U_(U)Attach the adapter socket over
the spare tire clamp bolt.
Connect the jack handle and the
adapter socket. Turn the jack
handle.
The tire wi

Page 766 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 766 5-2. Steps to take in an emergency
SIENNA_OM_OM45483U_(U)Turn the tire jack portion “A” by
hand until the notch of the jack is
in contact with the jack point.
Raise the vehicle until the tire

Page 768 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 768 5-2. Steps to take in an emergency
SIENNA_OM_OM45483U_(U)Firmly tighten each wheel nut
two or three times in the order
shown in the 
illustration.
Tightening torque:
76 ft•lbf (103 N•m, 10.5 k

Page 770 of 872

TOYOTA SIENNA 2014 XL30 / 3.G Owners Manual 770 5-2. Steps to take in an emergency
SIENNA_OM_OM45483U_(U)
■Jack point guide
■After completing the tire change
The tire pressure warning system must be reset. ( P. 690)
■When using the com
Page:   < prev 1-8 9-16 17-24 next >