2014 TOYOTA PRIUS C light

[x] Cancel search: light

Page 450 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 5
When trouble arises
447
5-2. Steps to take in an emergency
If a warning message is displayed
If a warning is shown on the multi-information display, stay calm and
perform the following actions:
Mult

Page 456 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 5
When trouble arises
453
5-2. Steps to take in an emergency
 (Flashes)
Indicates that the 
hybrid battery (trac-
tion battery) power 
has dropped because 
a long period of time 
has elapsed after 
sh

Page 458 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 5
When trouble arises
455
5-2. Steps to take in an emergency
Have the malfunction repaired immediately. (vehicles with a
smart key system)
After taking the specified steps to correct the suspected pro

Page 463 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 460 5-2. Steps to take in an emergency
Once(Flashes)• The electronic 
key could not be 
detected when 
the “POWER” 
switch was 
pressed after 
the doors were 
unlocked with 
the mechanical 
k

Page 470 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 5
When trouble arises
467
5-2. Steps to take in an emergency
Slightly loosen the wheel nuts
(one turn).
Turn the tire jack portion “A” by
hand until the notch of the jack is
in contact with the ja

Page 473 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 470 5-2. Steps to take in an emergency
■The compact spare tire
●The compact spare tire is identified by the label “TEMPORARY USE
ONLY” on the tire sidewall.
Use the compact spare tire temporar

Page 478 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 5
When trouble arises
475
5-2. Steps to take in an emergency
If the hybrid system will not start
Reasons for the hybrid system not starting vary depending on the
situation. Check the following and  pe

Page 479 of 563

TOYOTA PRIUS C 2014 NHP10 / 1.G Owners Manual 476 5-2. Steps to take in an emergency
Emergency start function (vehicles with a smart key system)When the hybrid system does not start, the following steps can be
used as an interim measure to start