INFORMATION BEFORE DRIVING YOUR TOYOTA11 7
When the anti−lock brake system is ac-
tivated, the following conditions may
occur. They do not indicate a malfunc-
tion of the system:
DYou may hear the anti−lock brake sys-
tem operating and feel the brake pedal
pulsating and the vibrations of the ve-
hicle body and steering wheel. You
may also hear the motor sound from
the area around the front axle even
after the vehicle is stopped.
DAt the end of the anti−lock brake sys-
tem activation, the brake pedal may
movealittleforward.
CAUTION
Do not overestimate the anti−lock
brake system: Although the anti−lock
brake system assists in providing ve-
hicle control, it is still important to
drive with all due care and maintain
a moderate speed and safe distance
from the vehicle in front of you, be-
cause there are limits to the vehicle
stability and effectiveness of steering
wheel operation even with the anti−
lock brake system on.
If tire grip performance exceeds its
capability, or if hydroplaning occurs
during high speed driving in the rain,
the anti−lock brake system does not
provide vehicle control.
Anti−lock brake system is not de-
signed to shorten the stopping dis-
tance: Always drive at moderate
speed and maintain a safe distance
from the vehicle in front of you.
Compared with vehicles without an
anti−lock brake system, your vehicle
may require a longer stopping dis-
tance in the following cases:
DDriving on rough, gravel or snow−
covered roads.
DDriving with tire chains installed.
DDriving over the steps such as the
joints on the road.
DDriving on roads where the road
surface is pitted or has other differ-
ences in surface height.
Install all tires of specified size at
appropriate pressure: The anti−lock
brake system detects vehicle speeds
using the speed sensors for respec-
tive wheels’ turning speeds. The use
of tires other than specified may fail
to detect the accurate turning speed
resulting in a longer stopping dis-
tance.
Dyna100/150_EE
DO−IT−YOURSELF MAINTENANCE: Engine and Chassis197
CAUTION
DDo not exceed 50 km/h (30 mph) or
the chain manufacturer ’s recom-
mended speed limit, whichever is
lower.
DDrive carefully avoiding bumps,
holes, and sharp turns, which may
cause the vehicle to bounce.
DAvoid sharp turns or locked−wheel
braking as use of chains may ad-
versely affect vehicle handling.
DWhen driving with chains installed,
be sure to drive carefully. Slow
down before entering curves to
avoid losing control of the vehicle.
Otherwise an accident may occur.
WHEN TO REPLACE YOUR WHEELS
If you have wheel damage such as
bending, cracks or heavy corrosion, the
wheel should be replaced.
If you fail to replace a damaged wheel,
the tire may slip off the wheel or cause
loss of handling control.
WHEEL SELECTION
When replacing wheels, care should be
taken to ensure that the wheels are re-
placed by ones with the same load ca-
pacity, diameter, rim width, and inset
(single wheels) or offset (dual wheels).
Correct replacement wheels are available
at any authorized Toyota dealer or repair-
er, or another duly qualified and equipped
professional.
: Conventionally referred to as “offset”.
A wheel of a different size or type may
adversely affect handling, wheel and bear-
ing life, brake cooling, speedometer/odom-
eter calibration, stoppingability,headlight
aim, bumper height, vehicle ground clear-
ance, and tire or snow chain clearance to
the body and chassis.
Replacement with used wheels is not rec-
ommended as they may have been sub-
jected to rough treatment or high mileage
and could fail without warning. Also, bent
wheels which have been straightened may
have structural damage and therefore
should not be used. Never use an inner
tube in a leaking wheel which is designed
for a tubeless tire.
Dyna100/150_EE
Replacing wheels
212SPECIFICATIONS
mm (in.)
Model
1Overall lengthOverall widthOverall height
KDY221R−TBMDYW4430 (174.4)1695 (66.7)1975 (77.8)
KDY221R−TBMDYW34345 (171.1)1695 (66.7)1965 (77.4)
2050 (80.7)
2
KDY221L−TBMDYW4430 (174.4)1695 (66.7)1975 (77.8)
KDY221L−TBMDYW34345 (171.1)1695 (66.7)1965 (77.4)
2050 (80.7)
2
KDY231R−TBMGYW34590 (180.7)1900 (74.8)1975 (77.8)
2060 (81.1)
2
KDY231L−TBMGYW34590 (180.7)1900 (74.8)1975 (77.8)
2060 (81.1)
2
KDY231L−PBMEYW34590 (180.7)1900 (74.8)2000 (78.7)
2150 (84.6)
KDY231L−PSMBYW4690 (184.6)1695 (66.7)1985 (78.1)
KDY231L−PSMBYW34590 (180.7)1695 (66.7)1995 (78.5)
2140 (84.3)
2
KDY251R−TBMGYW35905 (232.5)1900 (74.8)1975 (77.8)
2060 (81.1)
2
KDY251L−TBMGYW35905 (232.5)1900 (74.8)1975 (77.8)
2060 (81.1)
2
KDY251L−PBMEYW35905 (232.5)1900 (74.8)2000 (78.7)
2140 (84.3)
2
KDY261L−TBMGYW36475 (254.9)1900 (74.8)1975 (77.8)
2060 (81.1)
2
KDY261L−PBMEYW36475 (254.9)1900 (74.8)2000 (78.7)
2140 (84.3)
2
Dyna100/150_EE
Dimensions
