2014 TOYOTA 4RUNNER light

[x] Cancel search: light

Page 345 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3436-1. Maintenance and care
6
Maintenance and care
4RUNNER (U)_(OM35A83U)■
Bumpers and side moldings
Do not scrub with abrasive cleaners.
CAUTION
■When washing the vehicle
Do not apply water to t

Page 348 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3466-1. Maintenance and care
4RUNNER (U)_(OM35A83U)
NOTICE
■Cleaning detergents
● Do not use the following types of detergent, as they may discolor the vehi-
cle interior or cause streaks or damag

Page 352 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3506-2. Maintenance
4RUNNER (U)_(OM35A83U)
Vehicle interior
ItemsCheck points
Accelerator pedal• The accelerator pedal should move smoothly(without uneven pedal effort or catching).
Automatic transm

Page 356 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3546-3. Do-it-yourself maintenance
4RUNNER (U)_(OM35A83U)
Fuses (P. 388)• Fuse with same amperage rating as original
Light bulbs (P. 391)
• Bulb with same number and wattage rating as
origin

Page 358 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3566-3. Do-it-yourself maintenance
4RUNNER (U)_(OM35A83U)
Pull the hood lock release lever.
The hood will pop up slightly.
Push the auxiliary catch lever to
the left and lift the hood.
Hood
Release th

Page 367 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3656-3. Do-it-yourself maintenance
6
Maintenance and care
4RUNNER (U)_(OM35A83U)
■Brake fluid can absorb moisture from the air
Excess moisture in the brake fluid can cause a dangerous loss of brakin

Page 368 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3666-3. Do-it-yourself maintenance
4RUNNER (U)_(OM35A83U)■
Fluid level
The fluid level should be within the appropriate range.
Full (when cold)
Add fluid (when cold)
Full (when hot)
Add fluid (when

Page 370 of 530

TOYOTA 4RUNNER 2014 N280 / 5.G Owners Manual 3686-3. Do-it-yourself maintenance
4RUNNER (U)_(OM35A83U)■
After recharging/reconnecting the ba ttery (vehicles with a smart key sys-
tem)
The engine may not start. Follow the procedure below to ini