2014 SKODA FABIA manual radio set

Introductory information
Important notes

Introduction
This chapter contains information on the following subjects:
Declaration of Conformity 4
Consequently, this vehicle does not need to contain all of the equipment com-
ponents described in these operating instructions.
The level of equipment of your vehicle refers to your purchase contract of the
vehicle. For more information, please contact your local
ŠKODA retailer.
The illustrations in this Owner's Manual may have differences from your vehi-
cle; they are only intended for general information. WARNING
■ Concentrate fully at all times on your driving! As the driver you are fully
responsible for the operation of your vehicle.
■ Only use the unit in a way that leaves you in full control of your vehicle in
every traffic situation – there is the risk of an accident!
■ Adjust the volume to ensure that acoustic signals from outside the vehi-
cle, e.g. sirens from emerging vehicles instructing you to give way to, such
as the police, ambulance and fire brigade, can be heard at all times.
■ High volumes can cause hearing damage! Declaration of Conformity
Read and observe on page 4 first.
ŠKODA AUTO a.s. hereby declares that the ŠKODA Infotainment systems meet
the basic requirements and additional provisions of Directive

1999/5/EC with
reference to radio equipment and telecommunications devices.  Description and Operation of device

Introduction
This chapter contains information on the following subjects:
Description of device 4
Switching the unit on/off 5
Setting volume 5
Operation using the buttons/dial on the multifunction steering wheel 5
This chapter covers the device and the function of each button. Description of device
Fig. 1
Description of the device
 - Switching the unit on and off
Settings adjustment
Function keys (the functions for these keys are described in the relevant
chapters)
Display  1
2
3
4
4
Introductory information


- Radio mode » page 8

 - Select media » page 10
 - Tone settings
» page 7
 - Advanced settings
» page 7


 - Settings mode:
› Radio » page 9
› Media » page 13

 - Backward and forward movement (if necessary settings of the se-
lected menu item values)
SD memory card slot Switching the unit on/off
Switching the unit on and off manually › Press
 to switch the device on or off.
Turn on device automatically
If the device was not turned switched off using the  button before the igni-
tion was turned off, this will automatically switch on after the ignition has
been switched on.
Switching off the unit automatically
If the vehicle key is pulled out of the ignition lock while the unit is switched on,
the unit will switch off automatically.
If the vehicle is fitted with the starter button, the device will switch off auto-
matically after the engine is switched off and the door is opened.
When the ignition is switched off, the unit switches itself off automatically af-
ter approximately half an hour (prevents the vehicle battery being drained).
The device can be turned off automatically under certain circumstances due to
the protection against the vehicle battery discharged or the device protection.
The device informs you of this via a text message on the device display.
› Low batt. - Vehicle battery almost empty
› Temp high, - Device temperature is too high
› Temp low - Device temperature is too low Note
When the device is switched on, the audio source and operating mode that
were active before switching off will be restored. 5
6
7
8
9
10
11 Setting volume
The clock is set using rotable adjuster 2
» Fig. 1 on page 4
.
The change in volume is displayed on the screen of the unit.
Increase the volume
› Turn rotable adjuster 2
to the right.
Reduce the volume
› Turn rotable adjuster 2
to the left.
Muting
› Adjust the volume using rotable adjuster 2
to the left to 0.
The symbol appears in the display when the sound is muted. .
Playback interruption occurs (pause) if media were being played at the time
the volume was reduced. CAUTION
■ High volumes can cause sound resonance in the vehicle.
■ The car speakers may be damaged if the volume is set too loud. Note
The device supports the volume setting of the currently received TP-traffic an-
nouncements. Operation using the buttons/dial on the multifunction steering
wheel
Fig. 2
Multi-function steering wheel -
Function keys
Some device functions can be operated via the buttons on the multifunction
steering wheel. 
5
Introductory information

Radio
Operation

Introduction
This chapter contains information on the following subjects:
Display 8
Select the frequency range 8
Save radio stations 8
Select radio stations and search 9
The unit allows analogue radio reception of FM and AM frequencies. CAUTION
■ Car parks, tunnels, tall buildings or mountains can disrupt the radio signal
even causing it to fail completely.
■ For vehicles with window antennas do not stick foil or metal coated stickers
to the window as this can lead to interference. Display
Fig. 4
Radio - Display
Read and observe on page 8 first.
Description of the display
» Fig. 4
The selected frequency range
The selected radio station (frequency or identifier)
Status bar
 A
B
C Icons in the status bar C
Symbol
Meaning
 Manually selecting a radio station
 Browse available radio stations
 -
 Number one position/button under which the radio sta-
tion is stored
 Sound off
 A traffic information station is available
 No traffic information station is available Select the frequency range
Read and observe on page 8 first.
›
Press the

 button repeatedly.
Each frequency range has two storage groups each FM1 and FM2 or AM1 and
AM2. Note
If a radio station should broadcast RDS data information in the FM frequency
range, then the name will be shown in the device display instead of the fre-
quency of the broadcasting station. Save radio stations
Read and observe on page 8 first.
Storing manually
›
Hold one of the preset buttons
 -
 .
The station is stored in the selected position.
The storage is confirmed by an acoustic signal as well as the display of the
stored position selected.
Automatic storage › Press the

 button.
In the device display the following text appears AutoStore ... and in the current
storage group (e.g. FM1), six radio stations are stored with the strongest signal.


8 Radio

Select radio stations and search
Read and observe on page 8 first.
Select radio stations from the list of available stations
The device will automatically search for available radio stations in the back-
ground, which can be selected immediately after turning on the power.
›
Press the
 or
 button.
There will be a change to the previous or next channel.
Select radio stations from station buttons
By pressing the respective button  -
 , the device changes to the station
saved under the given position.
Manually selecting a radio station › Press the
 
 Manual button.
› Press the
 or
 button repeatedly and set the desired value of the fre-
quency range.
Station scan
› Press the
 or
 button.
A search commences in the selected direction and stops at the next station
with sufficient signal strength.
Search available stations (Scan)
› Press the

 
Scan  button.
The search is started.
This function plays all the available stations in succession for a few seconds
each.
Pressing the  button again ends the search and the current station will be
played. Settings and advanced functions

Introduction
This chapter contains information on the following subjects:
Settings 9
TP traffic 9

This chapter describes the settings of the
Radio
mode and contains informa-
tion about the function of the traffic program (TP). Settings
› Press the

 button repeatedly.
The following menu items are displayed in sequence.
■ TP - Sets the Traffic
■ Yes - Traffic news is being received
■ No - Traffic news is not being received
■ Scan - Browse available radio stations
■ Press  - Start the scan
■ Manual - Manual selection of a radio station
■ Press  - Start the manual selection
■ Search - Sets station selection (operation of  or
 button)
■ Stations - Select from the list of available stations
■ Pre-sets - Choice from the station buttons TP traffic
The function allows the reception of traffic information.
Turn Traffic Information mode on
› Press the


 TP  Yes button.
Traffic info reception off
› Press the


 TP  No button.
FM frequency range
If the radio station currently selected broadcasts traffic reports, then this will
be shown in the  device display.
If the radio station currently selected does not broadcast traffic reports, then
this will be shown in the  device display.
AM frequency range
No traffic reports are broadcast in the AM frequency.
If the FM Frequency range traffic information station is available, then this is
shown in the device  display.
If the FM frequency range does not show any traffic information station as be-
ing available , then the device display  will show this. 
9
Radio

Index
A
Adjusting the volume 5
Audio sources 11
AUX 13
AUX input 13
B
Buttons Device 4
Multi-function steering wheel 5
C
Clock 7
D
Declaration of conformity 4
Description 4
Description and Operation of device 4
Device display 4
Display Media 10
Radio 8
Settings 6
E
Extras manual search 9
Scan 9
F
File Formats 13
Frequency range 8
I
Important notes 4 M
Media 10
AUX 13
Display 10
File Formats 13
Operation 10
SD card 12
Select audio source 11
Settings 13
Supported Media 13
USB 12
Median Playback 11
Memory list 8
Multi-function steering wheel 5
O
Operation Media 10
Radio 8
Settings 7
P
Playback (media) 11
R
Radio Display 8
Frequency range 8
manual search 9
Memory list 8
Operation 8
Save station 8
Scan 9
Search for stations 9
Select station 8
Settings 9
TP 9
Traffic 9 S
Save station 8
Scan 9
SD card 12
Search for stations 9
Select audio source 11
Select station 8, 9
Settings Device 7
Display 6
Media 13
Multi-function steering wheel 5
Operation 7
Radio 9
Sound 7
Volume 5
Setup 7
Sound 7
Supported audio sources 13
Supported files 13
Switching the unit off 5
Switching the unit on 5
T
Time of day see clock 7
TP 9
Traffic 9
U
USB 12
USB input 12
V
Volume 5
15
Index