2014 Seat Mii rims

Advice
Tyres that are over 6 years old
Tyres are subject to an ageing process as a
result of physical and chemical processes.
This may affect their performance. Tyres
which are stored for long periods of time
without being used, harden and become
more fragile than tyres which are in constant
use.
SEAT recommends that tyres over six years
old are replaced with new tyres. This also ap-
plies to tyres (including the spare wheel)
which appear to be in perfect condition on
the outside and which have a tread depth
within the values stipulated by the Law ››› .
The date of manufacture, part of the tyre
identification number (TIN), indicates the age
of the tyre ( ) ››› page 167 .
St orin
g tyres
Mark tyres when you remove them to indicate
the direction of rotation (left, right, forwards,
backwards). This ensures you will be able to
mount them correctly when you replace
them. When removed, the wheels and/or
tyres should be stored in a cool, dry and pref-
erably dark location. Do not place tyres
mount

ed on the wheel in a vertical position.
Protect tyres not mounted on wheels from
dirt by storing them in suitable bags and
standing them on the ground on their tread. WARNING
Aggressive fluids or substances could result
in visible or invisible damage with the conse-
quent risks.
● Always ensure that tyres do not come into
contact with chemical products, oil, grease,
fuel, brake fluid or other aggressive substan-
ces. WARNING
Old tyres, even if they have never been used,
may lose air or burst unexpectedly while driv-
ing, resulting in serious accident or damage.
● If tyres are over six years old, they should
only be used in an emergency and with ex-
treme caution. For the sake of the environment
Old tyres must be disposed of by qualified
personnel according to the laws in the coun-
try concerned. Wheel rims
The design of wheel bolts is matched to the
rims. If different rims are fitted, the correct
wheel bolts with the right length and correct-
ly shaped bolt heads must be used. This en-
sures that wheels are fitted securely and that
the brake system functions correctly
››› page 174 . F
or t
echnical reasons, it is not generally pos-
sible to use the wheels from other vehicles.
In some cases, this may also be true for the
same model of wheel.
The tyres and rims approved by SEAT are spe-
cially matched to the characteristics of the
vehicle and are critical to good road holding
and safe handling.
Note for Italy:
A SEAT Service Centre should
be consulted whether different sized wheels
or tyres to those originally fitted by SEAT may
be fitted, as well as the combinations al-
lowed between the front axle (axle 1) and
back axle (axle 2).
Wheel bolts
Wheel bolts must be tightened to the correct
torque ››› page 174
.
Beadlock wheel rims
Beadlock wheel rims have various compo-
nents. These are joined together by special
bolts using a special procedure. This ensures
good performance, a better seal, improved
safety and wheel run out. Therefore, worn
rims should always be replaced and must on-
ly be repaired in a specialised workshop.
SEAT recommends visiting a technical service
››› .
160

Wheels and tyres
Wheel rims with bolted trims
Wheel rims may be fitted with interchangea-
ble trim parts which are attached to the rim
using self-locking bolts. Worn trims should
only be replaced at a specialised workshop.
SEAT recommends visiting a technical service
››› .
WARNING
The use of worn or damaged wheel rims could
make driving more dangerous and result in
serious accidents and damage.
● Only wheel rims which have been approved
for use with your vehicle should be used.
● Inspect wheel rims regularly for damage
and replace as required. WARNING
If the bolted joints of wheel rims with bolted
ring trims are not correctly tightened or loos-
ened, this could result in serious accident.
● Never loosen the bolted joints of wheel
rims with bolted ring trims.
● Any work relating to wheel rims with bolted
rims should be carried out at specialised
workshop. SEAT recommends taking your car
in for technical service. Replacement of wheel rims and new
tyres
New tyres
● When tyres are new, drive with extreme
caution for the first 600 km, as all tyres need
to be run-in . Tyres which have not been run-
in do not
have such good grip ››› or brak-
ing capacity ››› .
● All four wheels must be fitted with radial
tyres of the same type, size (rolling circumfer-
ence) and the same tread pattern.
● The tread depth of new tyres may vary, ac-
cording to the type and make of tyre and the
tread pattern.
Replacing tyres
● Where possible, always replace both
wheels on an axle (both wheels on the front
axle or both wheels on the rear axle) ››› .
● Only replace used tyres with those author-
ised by SEAT for the corresponding type vehi-
cle. Pay special attention to size, diameter,
and maximum load and speed capacity.
● Never use tyres which are larger than SEAT
approved tyres. If the tyres are too big, they
may knock or rub against the chassis or other
components, resulting in damage. WARNING
New tyres do not give maximum grip and will
not have reached their maximum braking ca-
pacity to start with, and therefore need run-
ning in.
● To prevent accidents and major damage,
extreme caution should be taken for the first
600 km. WARNING
There should be adequate space between the
tyres and the vehicle in accordance with the
vehicle design. If this is not the case, the
tyres may rub against parts of the running
gear, chassis or brake lines, leading to faults
in the brake system or to tread detachment,
and the risk of burst tyres.
● The true tyre dimension should not be
greater than the dimensions of tyres manu-
factured and approved by SEAT and should
not rub against parts of the vehicle. Note
Although tyres may be shown as being the
same size, the true dimensions of different
types of tyre may vary with respect to the
nominal size, or tread patterns may be differ-
ent. Note
If you use tyres that are approved by SEAT,
you can be sure that the true tyre dimensions » 161Technical specifications
Advice
Operation
Safety

Wheels and tyresTyre code (example)Meaning
TREADWEAR 220Relative service life of the tyre, with respect to specific US standard test.
TRACTION ABraking capacity of tyre on wet surface (AA, A, B or C).
TEMPERATURE ATyre temperature resistance at higher test speeds (A, B or C).
If the tyre has other markings, these are specific tyre manufacturer codes or specific national codes, e.g. for Brazil or China.
a)
The letters TIN refer to the tyre serial number.
Tyres with directional tread pattern
Tyres with directional tread pattern have
been designed to operate best when rotating
in only one direction. An arrow on the tyre
sidewall indicates the direction of rotation on
tyres with directional tread. Always observe
the direction of rotation indicated when
mounting the wheel. This guarantees opti-
mum grip and helps to avoid aquaplaning,
grip, noise and wear.
If the tyre is mounted in the opposite direc-
tion of rotation, drive with extreme caution,
as the tyre is no longer being used correctly.
This is of particular importance when the
road surface is wet. Change the tyre as soon
as possible or remount it with the correct di-
rection of rotation.
Tyre load rating
The load rating code indicates the maximum
load in kilogrammes each wheel can carry
(load capacity). 425 kg
462 kg
487 kg
515 kg
545 kg
615 kg
Speed rating
The speed rating indicates the maximum
speed permitted for the tyres. max. 150 km/h (93 mph)
max. 160 km/h (99 mph)
max. 170 km/h (106 mph)
max. 180 km/h (112 mph)
max. 190 km/h (118 mph)
max. 200 km/h (124 mph)
max. 210 km/h (130 mph)
max. 240 km/h (149 mph)
max. 240 km/h (149 mph)
78
81
83
85
87
91
P
Q
R
S
T
U
H
V
Z max. 270 km/h (168 mph)
max. 300 km/h (186 mph)
Some manufacturers use the letters “ZR” for
tyres with a maximum authorised speed
above 240 km/h.
Snow chains When using snow chains, applicable local
legislation and maximum permitted speed
limits must be observed.
In winter weather, snow chains not only help
to improve grip but also improve the braking
capacity.
The fitting of chains is permitted
only on
front wheels and with the following combi-
nation

s of wheel trims and tyres :
»
W
Y
169
Technical specifications
Advice
Operation
Safety

AdviceTyre sizeWheel rim
165/70 R145 J x 14 offset of 35175/65 R14
SEAT recommends you ask a technical serv-
ice for further information on wheel, tyre and
chain sizes.
Wherever possible use fine-link chains meas-
uring less than 15 mm including the lock.
Remove wheel hub covers and trim rings be-
fore fitting snow chains
››› . The wheel bolts
should be covered with caps for safety rea-
sons. These are available from technical serv-
ices.
Temporary spare wheel
For technical reasons, snow chains must not
be used on the compact temporary spare
wheel ›››
page 165.
If it is necessary to fit chains with the tempo-
rary spare wheel in use, install the wheel on
the rear axle in the event of a fault in a front
wheel. Then, fit the rear wheel that is free, in-
stead of the damaged front wheel. In this sit-
uation, observe the rotating direction of the
wheels. SEAT recommends attaching the
snow chains before fitting the wheel. WARNING
The use of unsuitable or incorrectly fitted
chains could lead to serious accidents and
damage.
● Always the appropriate snow chains.
● Observe the fitting instructions provided by
the snow chain manufacturer.
● Never exceed the maximum permitted
speeds when driving with snow chains. CAUTION
● Remove the snow chains to drive on roads
without snow. Otherwise they will impair ve-
hicle handling, damage the tyres and wear
out very quickly.
● Wheel rims may be damaged or scratched if
the chains come into direct contact with
them. SEAT recommends the use of covered
snow chains. Note
Snow chains are available in different sizes
according to the vehicle type. Emergencies
In case of emergency First aid kit, warning triangle and fire
extinguishers* Fig. 120
In the luggage compartment: stor-
age compartment for the warning triangle Warning triangle
In some vehicle equipment it is possible to
store the warning triangle model shown in a
storage compartment of the luggage com-
partment
››› Fig. 120 .
Fir s

t-aid kit
The first aid kit must comply with legal re-
quirements. Check the expiry date of the con-
tents of the first aid kit.
170

Advice
Changing a wheel Introduction Some vehicle versions and models do not
have a factory-fitted jack or box spanner. In
this case, we recommend consulting a Speci-
alised workshop to change the wheel.
You should only change the wheels yourself if
the vehicle is parked in a safe place, you are
familiar with the procedure and safety stand-
ards and you have all the necessary tools!
Otherwise, you should seek professional as-
sistance.
WARNING
Changing a wheel can be dangerous, espe-
cially on the hard shoulder. Please observe
the following rules to minimise the risk of in-
jury:
● Stop the vehicle safely as soon as possible.
Park at a safe distance from surrounding traf-
fic to change a wheel.
● When changing a wheel, keep all passen-
gers, and particularly children, a safe dis-
tance away from the work area.
● Turn on the hazard warning lights to warn
other road users.
● Ensure the ground on which you park is flat
and solid. If necessary, support the jack on a
wide solid base. ●
If you are changing a wheel yourself, you
should be familiar with the required proce-
dure. Otherwise, you should seek professio-
nal assistance.
● Only use suitable tools that are not dam-
aged when changing a wheel.
● Always stop the engine, apply the hand-
brake lever firmly and place the selector lever
in position P, or engage a gear for a manual
gearbox to reduce the risk of the vehicle mov-
ing accidentally.
● Have the tightening torque of the wheel
bolts checked as soon as possible with a reli-
able torque wrench. WARNING
If the wheel trims are not appropriate or not
fitted correctly, they could cause major acci-
dents or damage.
● Incorrectly mounted wheel trims may come
off while driving and endanger other road
users.
● Damaged trims must never be mounted on
the wheels.
● Always ensure that the brake ventilation
and cooling is not cut off or blocked. This is
also valid if hubcaps are fitted later. If there
is not enough air, you may require signifi-
cantly longer braking distances. CAUTION
Remove and remount wheel trims taking care
to avoid damage to the vehicle. Hubcaps
Fig. 124
Remove the hubcap of the steel
wheel trim In order to access the wheel bolts, first re-
move the hubcap.
Removing and fitting the hubcap
● To remove , take the vehicle tool kit wire
hook and att
ach it to the edge of the wheel
trim ››› Fig. 124
.
● Remove the trim by pulling it in the direc-
tion of the arrow.
● To replace the hubcap , press the hubcap
against the trim until it clicks into place.
174

Advice
If the wheel bolt is very tight, you may be
able to loosen it by pushing down on the end
of the wheel brace carefully with your foot.
Hold on to the vehicle for support and take
care not to slip.
Loosening wheel bolts
● Fit the wheel brace as far as it will go over
the wheel bolt ››› Fig. 127 .
● Ho l
d the wheel brace at the end and rotate
the bolt approximately one turn anticlockwise
››

› .
Loosening anti-theft wheel bolts
For wheels with full hubcap, the anti-theft
wheel lock must be threaded into position
››› Fig. 128 2 before mounting the hubcap.
Otherwise it will not be possible to mount the
entire hubcap.
● Take the adapter for anti-theft wheel bolts
out of the vehicle tool kit.
● Insert the adapter onto the wheel bolt
››› Fig. 128 . Push it on as far as it will go.
● Fit the wheel

brace onto the adapter as far
as possible.
● Hold the wheel brace at the end and rotate
the bolt approximately one turn anticlockwise
››

› . Important information about wheel bolts
The wheel rims and bolts have been de-
signed to be fitted to factory options. If differ-
ent rims are fitted, the correct wheel bolts
with the right length and correctly shaped
bolt heads must be used. This ensures that
wheels are fitted securely and that the brake
system functions correctly.
In some circumstances, wheel bolts from the
same model vehicle should not be used.
Wheel bolt tightening torque
The prescribed tightening torque for wheel
bolts for steel and alloy wheels is
110 Nm
.
Hav e the tight

ening torque of the wheel bolts
checked as soon as possible with a reliable
torque wrench.
If wheel bolts are rusty and it is difficult to
tighten them, the threads should be replaced
and cleaned before checking the tightening
tor

que.
Never grease or lubricate wheel bolts or the
wheel hub threads. Although they have been
tightened to the prescribed torque, they
could come loose while driving. WARNING
If the wheel bolts are not fitted correctly they
could be released while driving leading to
loss of vehicle control and serious damage. ●
Only use wheel bolts which correspond to
the wheel rims in question.
● Never use different wheel bolts.
● The bolts and threads should be clean, free
of oil and grease and easy to thread.
● To loosen and tighten the wheel bolts, al-
ways use the wheel brace supplied with the
vehicle.
● Loosen the wheel bolts only about one turn
before raising the vehicle with the jack.
● Never grease or lubricate wheel bolts or the
wheel hub threads. Although they have been
tightened to the prescribed torque, they
could come loose while driving.
● Never loosen the bolted joints of wheel
rims with bolted ring trims.
● If the wheel bolts are not tightened to the
correct torque, they may come loose while
driving, and the bolts and rims may come
out. If the tightening torque is too high, the
wheel bolts and threads can be damaged. 176

Technical features
DimensionsLongitude3,557 mm
Width1,641-1,645 mm
Height, unladen1,478-1,489 mm
Wheelbase2,420 mm
Turning circle diameter a)approx. 9.8 m
Front track widtha)1,412-1,428 mm
Rear track widtha)1,408-1,424 mm
Ground clearance with
maximum authorised load109 mm
a)
Depending on the dimensions of the wheel trims and tyres,
there may be variations. CAUTION
● Special care should be taken when parking
in areas with high kerbs or fixed barriers. Ob-
jects protruding from the ground may dam-
age the bumper or other parts of the vehicle
during manoeuvres.
● Special attention is required when driving
through entrances, over ramps, kerbs or oth-
er objects. The vehicle underbody, bumpers,
mudguards and running gear, and the engine
and exhaust system could be damaged as
you drive over these objects. Capacities
Fuel tank capacity
Petrol enginesAround 35.0 l
, of which approximately 4.0 are the reserve.
Natural gas en-
gineNatural gas: approx. 11 kg; of whichmax. 1.5 kg reserve
Petrol: approx. 10 l; of which approx. 5 l reserve 203Technical specifications
Advice
Operation
Safety

Index
Unlocking from the inside . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Upholstery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 Fabric trim cleaning . . . . . . . . . . . . . . . . . . . . . 132
Padding cleaning . . . . . . . . . . . . . . . . . . . . . . . 132
Treating your upholstery . . . . . . . . . . . . . . . . . 132
V Valve caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Vehicle Collection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Loading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
locking and unlocking from the exterior . . . . . . 46
locking or unlocking from the inside . . . . . . . . . 48
Parking downhill . . . . . . . . . . . . . . . . . . . . . . . . . 91
Parking uphill . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Securing in case of a breakdown . . . . . . . . . . 171
Vehicle battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Automatic device disconnection . . . . . . . . . . . 157
Checking the electrolyte level . . . . . . . . . . . . . 156
Discharging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Explanation of symbols . . . . . . . . . . . . . . . . . . 154
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Starting assistance . . . . . . . . . . . . . . . . . . . . . . 182
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Vehicle care Aerial built into the window . . . . . . . . . . . . . . . 135
Airbag modules (dash panel) . . . . . . . . . . . . . 133
Aluminium wheel rims . . . . . . . . . . . . . . . . . . . 129
anodized surfaces . . . . . . . . . . . . . . . . . . . . . . 129
Automatic car wash . . . . . . . . . . . . . . . . . . . . . 126
Changing windscreen wiper blades . . . . . . . . 188
Chrome wheel rims . . . . . . . . . . . . . . . . . . . . . . 129
Cleaning compartments . . . . . . . . . . . . . . . . . . 133 Cleaning seat belts . . . . . . . . . . . . . . . . . . . . . . 134
Cleaning wheels . . . . . . . . . . . . . . . . . . . . . . . . 130
Cleaning windscreen wiper blades . . . . . . . . . 188
Dash panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
De-icing the door lock cylinder . . . . . . . . . . . . 130
Engine compartment . . . . . . . . . . . . . . . . . . . . 131
Exterior mirrors . . . . . . . . . . . . . . . . . . . . . . . . . 128
Fabric trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
High pressure cleaning apparatus . . . . . . . . . 127
Padding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Plastic parts . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Protection of vehicle undercarriage . . . . . . . . 130
Rubber seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Special features . . . . . . . . . . . . . . . . . . . 127, 128
Treating your upholstery . . . . . . . . . . . . . . . . . 132
Vehicle paintwork . . . . . . . . . . . . . . . . . . . . . . . 129
Washing by hand . . . . . . . . . . . . . . . . . . . . . . . 126
Washing the vehicle . . . . . . . . . . . . . . . . . . . . . 126
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Windscreen wipers service position . . . . . . . . . 61
Wooden trim . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Vehicle code Vehicle data label . . . . . . . . . . . . . . . . . . . . . . . 198
Vehicle data label . . . . . . . . . . . . . . . . . . . . . . . . . 197
Vehicle identification data . . . . . . . . . . . . . . . . . . 197
Vehicle identification number . . . . . . . . . . . . . . . 197
Vehicle key assign . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 44
Changing the battery . . . . . . . . . . . . . . . . . . . . . 44
control lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Synchronising . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Vehicle key set . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Vehicle mechanical key . . . . . . . . . . . . . . . . . . . . . 44
Vehicle telephone . . . . . . . . . . . . . . . . . . . . . . . . 120
Vehicle tool kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Vehicle's battery
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Disconnecting . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Replacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Running flat . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Vibrations Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
W Warning and control lamps Changing gear . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Warning lamp Alternator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
City Safety Assist function . . . . . . . . . . . . . . . . 111
Engine coolant . . . . . . . . . . . . . . . . . . . . . . . . . 150
Engine oil pressure . . . . . . . . . . . . . . . . . . . . . . 147
Hill hold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Vehicle battery . . . . . . . . . . . . . . . . . . . . . . . . . 155
Warning triangle . . . . . . . . . . . . . . . . . . . . . . . . . . 170
Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 by hand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
with high pressure cleaning apparatus . . . . . 127
Washing the vehicle . . . . . . . . . . . . . . . . . . . . . . . 126 Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Special features . . . . . . . . . . . . . . . . . . . . . . . . 127
Water box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Wear indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Wear of tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Wheel bolts . . . . . . . . . . . . . . . . . . . . . 174, 175, 199 Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Tightening torque . . . . . . . . . . . . . . . . . . . . . . . 176
Wheel load capacity . . . . . . . . . . . . . . . . . . . . . . . 168
214