2014 PORSCHE 911 TURBO sat nav

Instrument Panel and Multi-Function Display 103
Phone Menu
In the “Phone” main menu, you can retrieve telephone numbers stored in the phonebook or in lists of most recently dialed or received calls.
Dialing telephone number
Answering calls
Rejecting calls
Ending a call
Making multiple calls simultaneously
During an active telephone conversation, you have the option of starting another telephone conversation.You can have a separate conversation with the person you have called or alternatively start a conference call together with the other caller.
Making additional calls
During a current call:
Switching between callers
Adding a caller to a conference call
Map Menu
In the “ Map” main menu, you can view and modify the map display on the navigation system.
Modifying map display
1. Main menu “Phone” and confirm.
1. Main menu “Phone”
2.“Phonebook” or “ Previous calls” or “ Received calls” and confirm.
3. Select the desired telephone number and confirm.
1. Main menu “Phone”
2.Select “Answer” and confirm.
1. Main menu “Phone”
2.“Reject” and confirm.
1. Main menu “Phone”
2.“End call” and confirm.
1. Main menu “Phone”
2.“New call” and confirm.
1. Main menu “Phone”
2.“Swap” and confirm.
1. Main menu “Phone”
2.“Conference” and confirm.
1. Main menu “Map” in the main menu.
1. Main menu “Map” and confirm.
2. Select display option and confirm.
3. Confirm your selection.
Function is active.
Function is not active.
14_991_Turbo_21.book Seite 103 Mittwoch, 9. April 2014 2:19 14

124 Instrument Panel and Multi-Function Display
Setting date and time
The date and time displays on the vehicle can be adjusted individually.
Information
On vehicles with Porsche Communication Management (PCM), the date and time are set and synchronized automatically by satellite navigation signals (GPS).Some setting options may be temporarily unavailable, depending on satellite signal reception.
Setting the time
The time, time format and time zone can be set in the “ Time” menu.
Displaying GPS time
The time can be synchronized via the GPS signal and displayed.
Setting the time format
The time can be displayed in 12-hour or 24-hour format.
Available setting options: –“ 12h” –“ 24h”
Setting current time
On vehicles without Porsche Communication Management (PCM), the hours and minutes can be set separately when setting the time.
Setting time zone
The time zone of the vehicle clock can be set individually on vehicles with Porsche Communication Management (PCM).
1. Main menu “Vehicle” > “ Settings” > “ Date & Time” and confirm.
1. Main menu “Vehicle” > “ Settings” > “ Date & Time” > “ Time” and confirm.
1. Main menu “Vehicle” > “ Settings” > “ Date & Time” > “ Time”
2.Select “GPS time”.
3.Confirm your selection.
Time synchronized with GPS.
Time not synchronized with GPS.
1. Main menu “Vehicle” > “ Settings” > “ Date & Time” > “ Time”
2.“Format” and confirm.
3. Select the desired setting and confirm.
1. Main menu “Vehicle” > “ Settings” > “ Date & Time” > “ Time”
2.Select “Hour/Minute”. in the main menu.
3. Set the desired time and confirm the setting.
1. Main menu “Vehicle” > “ Settings” > “ Date & Time” > “ Time”
2.Select “Zone” and confirm.
3. Set the desired time zone and confirm.
14_991_Turbo_21.book Seite 124 Mittwoch, 9. April 2014 2:19 14

Driving and Driving Safety 155
In heavy rain, while driving through water or after leaving a car wash, the braking action may be delayed and increased pressure may be required.fFor this reason, keep further back from the vehicle in front and “dry” the brakes by applying them at intervals. Make sure that the traffic behind you is not affected.
After a long drive over salted or gritted roads, a coating may form on the brake disks and pads that significantly reduces friction and therefore also braking effect.fEven though the brake disks consist of alloyed gray cast iron, they will unavoidably start to corrode if your vehicle is parked for an extended period. The brakes will tend to “rub” as a result.The nature, extent and effects of corrosion depend on the amount of time the vehicle was parked, whether road salt or grit was spread and whether grease-dissolving agents were used in car washes (not on vehicles with Porsche Ceramic Composite Brake).To prevent corrosion of the brake disks, “brake them dry” before parking the vehicle (not on vehicles with Porsche Ceramic Composite Brake).If braking comfort is noticeably impaired, we recommend that you have the brake system checked by experts at an authorized Porsche dealer.
fTo relieve the brake system on downhill stretches, change down to a lower gear in good time (engine braking).If engine braking is insufficient on steep stretches, operate the footbrake at intervals. Avoid continuous braking as it overheats the brakes and reduces the braking effect.
For information on brake fluid and checking the brake fluid level:fPlease see the chapter “BRAKE FLUID” on page 243.
New brake pads or linings
New brake pads have to be “broken in”, and therefore only attain optimal friction when the car has covered several hundred miles or km.The slightly reduced braking ability must be compensated for by pressing the brake pedal harder. This applies whenever the brake pads and/or brake disks are replaced.
A - Switch cruise control on/off 1 - Set/increase desired speed 2 - Reduce desired speed 3 - Interrupt (OFF) 4 - Return to set speed (RESUME)
Cruise Control
Cruise control maintains any selected speed between approx. 20–150 mph (30–240 km/h) without you having to use the accelerator.Cruise control is operated using the control stalk at the bottom left of the steering wheel.Downshifts are carried out to help maintain the pre-selected speed (especially when driving downhill).
Wet Brakes
Reduced Braking Efficiency
WARNINGh
WARNINGh
14_991_Turbo_21.book Seite 155 Mittwoch, 9. April 2014 2:19 14

170 Driving and Driving Safety
If aftermarket systems are installed by non- dealership technicians or outside the selling dealer, problems may result. Installation of aftermarket equipment is not covered under the New Car Warranty. fConsult your authorized Porsche dealer about the installation of non-Porsche approved equipment.
Reception quality
The reception quality of your car telephone will change constantly when you are driving. Interference caused by buildings, landscape and weather is unavoidable. It may become particu-larly difficult to hear when using the hands-free function due to external noise such as engine and wind noise.
Automatic car-wash
fUnscrew external antennas before using an automatic car-wash.
Porsche Communication
Management (PCM)
Setting or operating the multi-function display, radio, navigation system, telephone or other equipment when driving could distract you from the traffic. You could lose control of the vehicle.fOperate the components while driving only if the traffic situation allows you to do so safely.fCarry out any complicated operating or setting procedures only with the vehicle stationary.fIf it is necessary to operate these components while the vehicle is in motion, use the function keys on the multi-functional steering wheel.
fRefer to the separate operating instructions before putting the PCM into operation.
When put into operation for the first time, a distance of approx. 3 miles (5 km) must be driven in order for the navigation system to complete the process of fine calibration. The same applies when the tires are changed (e.g. summer/snow tires) or new tires fitted. Full location accuracy is not yet achieved during the fine-calibration process.
If the vehicle has been transported (e.g. ferry, car train), the system may take a few minutes after being switched on before it determines the current location.
Serious tire slip (e.g. spinning wheels on snow) may result in temporarily inaccurate navigation.
When the battery has been disconnected, it may take up to 15 minutes before the navigation system is operational once more.
Satellite radio
You must have the satellite radio activated before you can put it into operation. You will need a contract with a provider in order to use this radio.fRefer to the separate radio operating instructions before putting into operation.
Operation of On-Board Systems
WARNINGh
14_991_Turbo_21.book Seite 170 Mittwoch, 9. April 2014 2:19 14