2014 PORSCHE 911 TURBO remote control

8 Contents
Performance Menu ..................................... 116 ACC Menu .................................................. 117Vehicle Settings on theMulti-Function Display .................................. 117Overview of Warning and Information Messages ............................. 129
Personal Settings ............................. 141
Brief Overview – Personal Settings ............ 142 Storing personal settings ............................ 143
Driving and Driving Safety ................ 145
Diagnostic Socket....................................... 146Ignition Lock............................................... 146Starting and Stopping the Engine ................. 147Auto Start Stop function .............................. 149Electric Parking Brake ................................. 151Brakes ....................................................... 152Cruise Control ............................................ 155Adaptive Cruise Control ............................... 157Car Audio Operation/Tips ............................ 168Porsche Communication Management (PCM) 170USB/iPod® and AUX ................................... 171Voice Control.............................................. 171Porsche Doppelkupplung (PDK) .................... 172Selector-lever Positions .............................. 174Limp-home mode ........................................ 178Transmission and Chassis Control Systems .. 179Porsche Traction Management (PTM) ........... 180Porsche Stability Management (PSM)............ 181HOLD function: Drive-Off Assistant, Standstill Management ................................ 184ABS Brake System (Anti-lock Brake System) . 184Porsche Active Suspension Management (PASM) ................................... 185Porsche Torque Vectoring (PTV Plus)............ 186Porsche Dynamic Chassis Control (PDCC)..... 187Dynamic Engine Mounting (PADM) ................ 188
“Sport” and “Sport Plus” mode .....................188 Extending Front and Rear Spoilers ................190Rear Axle Steering ......................................191
Storage, Luggage Compartment and Roof Transport System ..................... 192
Storage......................................................193 Drinks Holder/Cupholder .............................194Ashtray ......................................................195Cigarette Lighter .........................................196Sockets .....................................................196Luggage Compartment................................197Roof Transport System................................200Loading Information ....................................204
Parking ........................................... 206
ParkAssist ..................................................207Reversing Camera.......................................209Swivelling Down Mirror Glass as Parking Aid..210Garage Door Opener HomeLink®
(Universal Remote Control)...........................211
Alarm System and Theft Protection ... 215
Alarm System and Passenger Compartment Monitoring.............216Immobilizer.................................................217Theft Protection ..........................................217
Maintenance and Car Care ............... 218
Exercise Extreme Caution when Working on your vehicle...............................219Engine Oil ...................................................221Checking Engine Oil Level ............................222Topping Up Engine Oil .................................222Washer Fluid windshield ...............................224Wiper Blades ..............................................224Emission Control System .............................225
How Emission Control Works....................... 226 Fuel Economy ............................................ 226Operating Your Porsche in other Countries ... 227Fuel........................................................... 227Portable Fuel Container............................... 229Fuel Recommendations............................... 230Fuel Evaporation Control ............................ 231Car Care Instructions.................................. 231
Minor Repairs .................................. 239
Exercise Extreme Caution when Working on your vehicle .............................. 240Checking the Coolant Level and Adding Coolant .......................................... 242Brake Fluid ................................................ 243Electromechanical Power Steering............... 244Changing Air Cleaner .................................. 244Changing Particle Filters ............................. 244Tires and Wheels........................................ 244Changing Wheels........................................ 254Wheel Attachment Faces............................. 257Wheel Bolts ............................................... 257Wheels with Central Lock ............................ 258Central Bolts .............................................. 258Changing a Wheel....................................... 258Rim Cleaner ............................................... 263Central Bolt Emergency Fastening ............... 263Flat Tire ..................................................... 265Electrical System ....................................... 267Battery (12 volt) ......................................... 271External Power Supply, Emergency starting with jumper cables ......................... 273Changing Car Key (Remote Control) Battery . 275Replacing bulbs.......................................... 276Headlights ................................................. 276Headlight Adjustment.................................. 277Towing ...................................................... 278Fire extinguisher......................................... 282
14_991_Turbo_21.book Seite 8 Mittwoch, 9. April 2014 2:19 14

16 Opening and Locking
Never invite car theft!
An unlocked car with the key in the ignition lock invites car theft.
A gong alarm is standard equipment in your Porsche. The gong alarm will sound if you open the driver's door while the key is still in the ignition lock. It is your reminder to pull the key out of the ignition lock and to lock the doors.
Never leave your vehicle unattended with the key in the ignition lock, especially if children and/or pets are left unattended in the vehicle. They can operate power windows and other controls. If the engine is left running, they may accidentally engage the shift lever. Serious personal injury or death could result from loss of control of the vehicle.fAlways remove the ignition key.fAlways set the electric parking brake.fLock the doors with the key or with the remote control.
To protect your vehicle and your possessions from theft, you should always proceed as follows when leaving your vehicle:fClose windows.fClose sun roof.fActivate the electric parking brake.fRemove ignition key (switch ignition off in vehicles that have Porsche Entry & Drive).fRemove valuables (e.g. car documents, radio control module, cell phones, house keys) from the car.fLock doors.fLock the glove compartment.fClose storage trays.
Notes on the Key and Central
Locking System
Key
You are provided with two car keys with integrated emergency key. These keys operate all the locks on your vehicle.fBe careful with your car keys: do not part with them except under exceptional circumstances.fRemove and take the ignition key with you, even if leaving the vehicle only briefly.Do not leave the ignition key in the vehicle.fInform your insurance company of any loss or theft of car keys or if extra or replacement keys have been cut.fThird parties can still operate the mechanical locks with a lost key.
Information
Different vehicle settings are stored on the respective key when the vehicle is locked, provided the vehicle is fitted with the relevant equipment.
For information on storing vehicle settings on the key:fPlease see the chapter “COMFORT ENTRY FUNCTION” on page 34.
Unattended VehicleWARNINGh
14_991_Turbo_21.book Seite 16 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 27
The vehicle cannot be unlocked
Remote control of the car key may – fail due to a fault,– due to a flat key battery,– not function correctly due to radio waves (also radio contact between remote control and vehicle in the case of Porsche Entry & Drive).
If the vehicle cannot be opened, then: 1. Place the car key at the outside edge of the windshield on the passenger’s side and, at the same time, press button ( illustration).
If the vehicle still cannot be opened, then: 2. Remove the emergency key from the car key. Please see the chapter “EMERGENCY KEY” on page 17.
3. Unlock and open the driver’s door with the emergency key.For this purpose, lift and hold the door handle.Insert the emergency key in the door lock, turn 90° anti-clockwise and remove the emergency key again.4. Release the door handle and open the door by pulling the door handle again.5. Switch on the ignition within 15 seconds to prevent the alarm system from triggering.Further procedure for vehicles with Porsche Entry & Drive:If the ignition cannot be switched on or if the engine will not start, the message “ Key not found or key fault Change key position ” will appear on the multi-function display.6. Turn control unit back to ignition lock position 0. 7. Try to start the engine again. If the engine will not start, the message ““ Key not found or key fault Change key position ” will appear again. The message “ Operating device: turn left, pull off, insert key ” appears after approx. 1 second.8. Turn control unit back to ignition lock position 0 and remove it from the ignition lock. Switch on the ignition using the ignition key (not the emergency key).
Switching off operational readiness (for vehicles with Porsche Entry & Drive)
Operational readiness of Porsche Entry & Drive is switched off after 96 hours for the driver’s door and after 36 hours for the passenger's door, if the vehicle is not unlocked within this time.1. Pull the door handle once to activate the system again.2. Pull the door handle again to open the door.
14_991_Turbo_21.book Seite 27 Mittwoch, 9. April 2014 2:19 14

Opening and Locking 29
Door lock under door handle (driver‘s side)
The vehicle cannot be locked
This is recognizable by the fact that the emergency flasher does not flash and there is no locking noise.
The remote control of the key may – fail due to a fault,– due to a flat key battery,– not function correctly due to radio waves(e.g. mobile phone) in the vicinity of the vehicle (even radio contact between remote control and vehicle in the case of Porsche Entry & Drive).
Emergency locking if the central locking system has failed
If the vehicle cannot be locked, then: 1. Remove the emergency key from the car key. Please see the chapter “EMERGENCY KEY” on page 17.2. Open the driver’s door.
3. Lift the door handle on the driver’s door ( illustration). Insert the emergency key in the door lock, turn 90° clockwise and remove the emergency key again.Successful locking is indicated by the hazard warning lights flashing twice.4. Release the door handle and shut the door. The driver’s door is now locked.5. To use the emergency locking function on the passenger’s door , insert the emergency key into the door lock on the driver’s door again, turn 90° clockwise and remove the emergency key again.The passenger’s door is now locked.
Information
Emergency locking of the passenger’s door is not possible if the central locking system is defective.
Information
If the central locking system is defective, operating the lock cylinder in the driver’s door will lock all functioning locking elements of the central locking system.fHave faults in the central locking system repaired by an authorized Porsche dealer.
Emergency key
Removing emergency key
1. Push the release button to the side. 2. Pull out the key.
Insert emergency key
fPush in the key until the release button engages audibly.
Information
Different vehicle settings are stored on the respective key when the vehicle is locked, provided the vehicle is fitted with the relevant equipment.
14_991_Turbo_21.book Seite 29 Mittwoch, 9. April 2014 2:19 14

206 Parking
Parking
ParkAssist .................................................. 207 Reversing Camera ...................................... 209Swivelling Down Mirror Glass as Parking Aid . 210Garage Door Opener HomeLink®
(Universal Remote Control) .......................... 211
14_991_Turbo_21.book Seite 206 Mittwoch, 9. April 2014 2:19 14

Parking 211
Garage Door Opener HomeLink®
(Universal Remote Control)
With the HomeLink® of your Porsche, a wide range of remote-controlled equipment (e.g. garage door/gate to your property, security systems, house lights) can be activated from inside the vehicle.
The HomeLink® system replaces up to three different original remote controls. The signal for a remote control can be assigned to one of the three memory buttons I, II and III on the overhead operating console keypad. The respective equipment can then be operated using the programmed memory button.
Transmission of the signal is indicated by the indicator light in the button II.
Information
fPlease read the instructions for the original remote control.fInformation on the compatibility of your vehicle’s HomeLink® system with the original remote control can be obtained from your authorized Porsche dealer, on the HomeLink® website (www.homelink.com) or by calling the free HomeLink® hotline (1-800-355-3515).
When opening and closing the equipment being operated, parts of the body could become trapped or crushed.fWhen using the garage door opener, make sure that no persons or animals are within the range of movement of the equipment that is being operated.fObserve the safety notes for the original remote control.
Information
fWhen the button is pressed, the transmitter unit sends the signal forward in direction of travel.Always align the vehicle with the receiver.Otherwise, range restrictions cannot be ruled out.fBefore selling the vehicle, delete the programmed signals for the garage door opener on the keypad. fIf the equipment cannot be operated after the initial programming, check whether the original remote control has fixed or changeable code.To find this out, read the instructions for the original remote control.
Garage Door Opener Use
WARNINGh
14_991_Turbo_21.book Seite 211 Mittwoch, 9. April 2014 2:19 14

212 Parking
Operating the garage door opener
The ignition must be switched on.fPress and hold the corresponding HomeLink® button on the overhead operating console keypad.The indicator light A lights up during signal transmission.
Programming garage door opener: Deleting and storing signals
The HomeLink® system is programmed on the overhead operating console and in direct proximity to the vehicle’s radiator grille.
Preconditions
In order to delete programmed signals and store garage door opener signals,– the ignition must be switched on,– the turn signals must be off and – the engine must be off.
When using the garage door opener, the vehicle must be within the range of the receiver.
Deleting programmed signals from the buttons
This process clears all of the HomeLink® programming. It is not possible to individually clear the programmed buttons.Do not repeat this process if you want to assign additional signals to the buttons.fKeep the two outer buttons I and III on the overhead operating console keypad pressed for approx. 20 seconds until the indicator light A on button II starts to flash quickly.fRelease the buttons.
The HomeLink® buttons are cleared and can be reprogrammed.
Assigning garage door opener signal to key with fixed code system
On the overhead operating console: 1. Switch on ignition. 2. The standard factory-set codes must be deleted before programming for the first time . 3. Press and hold the desired button on the overhead operating console keypad until the indicator light A on button II starts to flash slowly.You now have 5 minutes to teach the button.4. Stand in front of the vehicle with the original remote control of the system to be programmed.
14_991_Turbo_21.book Seite 212 Mittwoch, 9. April 2014 2:19 14

Parking 213
In front of the vehicle: 5. Hold the original remote control approx. 8 in. (20 cm) away from the marked position ( illustration) and press and hold the transmit button (for more than approx. 1 minute in some cases) until the vehicle’s turn signal lights flash on and off three times or the indicator light A on the overhead operating console starts flashing quickly.The turn signal lights flash three times and the indicator light A flashes quickly to confirm that the new signal has been programmed successfully.Several attempts with different distances between the vehicle and the original remote control may be necessary.With some systems, the transmit button on the original remote control may need to be pressed again when the indicator light on the original remote control goes out.
6. The turn signal lights will flash once when the 5 minute teaching readiness period has elapsed.Repeat steps 3 to 5.7. Repeat steps 3 to 5 to assign further signals to the remaining buttons.
Assigning garage door opener signal to button with changeable code system
With some systems, a changeable code also needs to be programmed for the HomeLink® system. A second person makes programming easier.
Identifying the changeable code
fPress and hold the previously programmed HomeLink® button.
If the indicator light A on button II in the overhead operating console starts to flash quickly and lights up continuously after approx. 2 seconds, it means that the equipment has a changeable code system.fInformation on synchronization can also be found in the operating instructions for the system to be programmed.
Assigning garage door opener signal to key
fPark the vehicle within the range of the remote- controlled equipment.
On the overhead operating console: 1. Switch on ignition. 2. The standard factory-set codes must be deleted before programming for the first time.
For information on deleting the factory-set codes:fPlease see the chapter “PROGRAMMING GARAGE DOOR OPENER: DELETING AND STORING SIGNALS” on page 212.3. Press and hold the desired button on the overhead operating console keypad until the indicator light A on button II starts to flash slowly.You now have 5 minutes to teach the button.4. Stand in front of the vehicle with the original remote control of the system to be programmed.
In front of the vehicle: 5. Hold the original remote control approx. 12 in. (30 cm) away from the marked position ( illustration) and press and hold the transmit button (for more than approx. 1 minute in some cases) until the vehicle’s turn signal lights flash on and off three times or the indicator light A on the overhead operating console starts flashing quickly.The turn signal lights flash three times and the indicator light A flashes quickly to confirm that the new signal has been programmed successfully.Several attempts with different distances between the vehicle and the original remote control may be necessary.With some systems, the transmit button on the original remote control may need to be pressed again when the indicator light on the original remote control goes out.
14_991_Turbo_21.book Seite 213 Mittwoch, 9. April 2014 2:19 14