2014 Peugeot RCZ Owner's Manual

8/
PRACTICAL INFORMATION
Changing reversing lamps and foglamps
These two bulbs are changed from outside the rear bumper:
 unclip the protective cover from the rear, then tilt it,
 remove it completely to gain access to the two lamp fi xing bolts, On the left-hand side, take care not to touch the silencer; risk
of burns, if you change the bulb immediately after switching
off the ignition.
 turn these two bolts one quarter of a turn and remove them,
 push the lamp towards the inside to unclip it, then tilt it,
 pull the lamp towards the outside for access to the various
bulb-holders.
- For the reversing lamps: pull the corresponding bulb holder,
- turn the bulb one quarter of a turn and change it.
- For the foglamp: turn the bulb holder one quarter of a turn and remove it,
- turn the bulb one quarter of a turn and change it.
To refi t, carry out these operations in reverse order.

184
Changing reversing lamp and foglamp bulbs
(1.6 litre THP 270 hp version)
The bulbs on these two types of lamp are changed by partly removing
the lamp unit A in the rear bumper:
 using a screwdriver, remove the 3 fi xing screws B located under the
vehicle,
Take care not to touch the silencer; risk of burns, if you
change the bulb immediately after switching off the ignition.
 without forcing, lower the rear part of the lamp unit for access to the \
bulb holders C ,
 turn the corresponding bulb holder a quarter of a turn then remove it towards the front of the vehicle,
 turn the bulb one quarter of a turn and change it.
To refi t, carry out these operations in reverse order.

8/
PRACTICAL INFORMATION
Changing sidelamps and direction indicators
For the replacement of this type of LED lamp, contact a PEUGEOT
dealer or a qualifi ed workshop. High pressure washing
When using this type of washing on stubborn dirt, do not persist
on the headlamps, the lamps and their surrounds to avoid
damaging their protective coating and seals.
Changing number plate lamps (W5W)
 Insert the end of the vehicle's key in the hole in the transparent cover.
 Push towards the outside to unclip it.
 Remove the transparent cover.
 Pull the bulb out and change it.
Changing the third brake lamp (LEDs)
For the replacement of this type of LED lamp, contact a PEUGEOT
dealer or a qualifi ed workshop.

186
CHANGING A FUSE
ACCESS TO THE TOOLS
The extraction tweezer is fi tted to the back of the dashboard fusebox
cover.
To gain access to them:
 turn the screw a quarter of a turn to the left,
 unclip the cover by pulling at the top right,
 remove the cover completely and turn it over,
 remove the carrier on which is fi tted the tweezer.
CHANGING A FUSE
Before changing a fuse, tit is necessary to:
 identify the cause and correct it,
 switch off all electrical consumers,
 immobilise the vehicle and switch off the ignition,
 identify the failed fuse using the allocation tables and drawings presented on the following pages.
To replace a fuse, you must:
- use the special tweezer to extract the fuse from its housing and check the condition of its fi lament,
- always replace a failed fuse with a fuse of the same rating (same colour); a different rating fuse may cause malfunctions (risk of fi re).
Good Failed
Tweezer
If the fault recurs soon after changing a fuse, have the electrical
system of your vehicle checked by a PEUGEOT dealer or a
qualifi ed workshop.

8/
PRACTICAL INFORMATION
Installing electrical accessories
Your vehicle's electrical system is designed to operate with
standard or optional equipment.
Before installing other electrical equipment or accessories on your
vehicle, contact a PEUGEOT dealer or a qualifi ed workshop.
PEUGEOT will not accept responsibility for the cost incurred in
repairing your vehicle or for rectifying malfunctions resulting from
the installation of accessories not supplied and not recommended
by PEUGEOT and not installed in accordance with its instructions,
in particular when the combined consumption of all of the
additional equipment connected exceeds 10 milliamperes.

188
DASHBOARD FUSES
The fusebox is placed in the lower section of the dashboard (left-hand \
side). It consists of two boxes.
Access to the fuses
 Refer to the paragraph "Access to the tools".
Fuse tables
Fuse N° Rating Functions
F2 30 A Locking and deadlocking earth.
F3 5 A Airbags, active bonnet and pretensioners
control unit.
F4 10 A Clutch pedal switch, electrochromatic
rear view mirror, automatic gearbox,
switching and protection unit.
F5 30 A One-touch electric windows, folding door
mirrors supply.
F7 5 A Front and rear courtesy lamps, map
reading lamps, sun visor lighting, glove
box lighting.
F8 20 A Audio equipment, audio/telephone,
multifunction screen, tyre under-infl ation
detection, clock.
F9 30 A 12 V socket.
F10 15 A Steering mounted controls.
F 11 15 A Low current ignition switch.
F12 15 A Instrument panel, air conditioning,
driver's seat memory unit, rain /
sunshine sensor, airbags.
Box 1

8/
PRACTICAL INFORMATION
Fuse N° Rating Functions
F13 5 A Engine fusebox, active bonnet.
F14 15 A Multifunction screen, seat belt and
passenger's front airbag warning lamps
display, instrument panel screen,
amplifi er, Bluetooth system, parking
sensors control unit, USB Box.
F15 30 A Locking and deadlocking.
F17 40 A Rear screen and door mirrors demist/
defrost.
Fuse N° Rating Functions
G36 30 A Hi-Fi amplifi er.
G37 30 A Passenger's seat memory unit.
G38 30 A Driver's seat memory unit.
G39 5 A Lighting memory unit.
G40 30 A Driver and passenger heated seats.
Box 2

190
ENGINE COMPARTMENT FUSES
The fusebox is placed in the engine compartment near the battery
(left-hand side).
Access to the fuses
 Unclip the cover.
 Change the fuse (see corresponding paragraph).
 When you have fi nished, close the cover carefully to assure the sealing of the fusebox.
Fuse table
Fuse N° Rating Functions
F2 15 A Horn.
F3 10 A Front wash-wipe.
F4 20 A Daytime running lamps.
F5 15 A Air fl ow sensor, coolant pump, oil pump,
thermostat, blow-by heater (petrol),
by-pass and EGR electrovalves (Diesel),
diesel heater (Diesel).
F6 10 A Steering wheel angle sensor, ABS/DSC
control unit, DSC sensor.
F7 10 A Power steering control unit, automatic
gearbox, dual function brake switch.
F8 25 A Starter motor control.
F9 10 A Diagnostic socket, directional
headlamps, particle emission fi lter pump
(Diesel).
F 11 40 A Air conditioning blower.