186
CHANGING A FUSE
ACCESS TO TOOLS
The extraction tweezer is fi tted to the back of the dashboard fusebox
cover.
For access to it:
open the glove box lid,
push the opening guide to the left to pass the fi rst notch,
open the glove box lid fully,
turn the screw a quarter of a turn to the left,
unclip the fusebox cover by pulling at the top right,
disconnect the cover completely and turn it over,
extract the carrier on the back of which fi tted the tweezer.
CHANGING A FUSE
Before changing a fuse, it is necessary to:
identify and rectify the cause of the failure,
switch off all electrical consumers,
immobilise the vehicle and switch off the ignition,
identify the failed fuse using the tables and diagrams in the following pages.
When working on a fuse, it is important to:
use the special tweezer to extract the fuse from its housing.
always replace the failed fuse with a fuse of the same rating (same colour); the use of a fuse of a different rating may cause a
malfunction (risk of fi re).
Good Failed
Tweezer
If the fault recurs soon after changing a fuse, have the electrical
system of your vehicle checked by a PEUGEOT dealer or a
qualifi ed workshop.
