Page 6 of 240
 4
Presentation
INSTRUMENTS AND CONTROLS 
    1.   Fusebox. 
  2.   Additional programmable heating. 
  3.   Cruise control / sped limiter controls.   4.   Vehicle configuration / Headlamp beam 
height / Front/rear foglamps. 
  5.   Lighting and direction indicator control  stalk. 
  6.   Instrument panel with screen.    7.   Wiper / screenwash / trip computer 
control stalk. 
  8.   Ignition  switch. 
  9.   Driver's front airbag / Horn. 
  10.   Steering mounted audio system  controls.    
     
        
        Page 8 of 240
 6
Location
 EXTERIOR  
  Rear  lamps,  direction 
indicators, 3 rd   brake 
lamp, foglamps  44, 138, 142-143     Left-hand  side: 
 fuel fi ller cap, fuel tank  129 
 Fuel  cut-off  130  
  Load  space  80-81 
 Rear  doors  21  
  Number  plate  lamp  143  
  Rear  parking  sensors  91  
  Spare  wheel,  jack, 
changing a wheel, 
tools, puncture repair kit  145-149 
 Infl ating, pressures  149, 163 
 Snow  chains  120  
  Towing,  lifting  150 
 Towbar,  towball  116-118     Dimensions 
152-158  
  Accessories  119 
 Roof rack, roof bars  118  
  Brakes,  pads  124,  127 
 Braking assistance systems  96-97 
 Trajectory  control  98-100 
 Tyres, pressures  149, 163 
 Pneumatic  suspension  93-94    Key, remote control, battery  14-17 
 Starting 
18,  38-39 
 Central  locking  22 
 Confi dential card  18 
 Alarm  19  
  Wiper  blade  144 
 Door  mirror  82 
 Side  repeater  141  
  Front lamps, direction indicators, 
front foglamps  44, 138-141 
 Headlamp beam height adjustment  46 
 Headlamp  wash  47 
 Changing  bulbs  138-141  
  Opening/closing  doors  20-22 
 Key  15-16 
 Opening the bonnet, stay  122 
 Autoclose  84,  87    
     
        
        Page 9 of 240
1
AT A GLANCE
 7
   Location   
 INSTRUMENTS  AND  CONTROLS  
  Instrument  panels, 
screens, speedometer 23 
 Warning lamps, indicator lamps  24-31 
 Gauges, indicators  32, 35 
 Gear  shift  indicator  36-37  
  Lighting  controls  44-46 
 Automatic illumination of headlamps  45 
 Guide-me-home  lighting  45 
 Parking  lamps  46  
  Vehicle confi guration 84-86 
 Setting the time  85 
 Headlamp beam height adjustment  46 
 Front/rear fog lamps  44 
 Pneumatic  suspension  93-94 
 Stop & Start  40-42 
 Additional  heating, 
rear air conditioning  64-65 
 Programmable 
additional  heating  66-68  
  Front/rear  wipers 
47 
 Screenwash/headlamp  wash  47 
 Trip  computer  89  
  Starter,  ignition  switch  38 
 Hill  start  39  
  Cruise  control 
48-50,  51-53 
 Speed  limiter  54-56 
 Fixed  speed  limiter  57     Steering wheel, reach adjustment  37 
 Horn 
96 
 Instruments and controls  4-5 
 Steering  mounted 
radio controls  10.5, 10.53  
  Electric  windows,  mirrors  82-83 
 Locking the load space  22  
  Gearbox 
36-37 
 Parking  sensors  91-92   
     
        
        Page 25 of 240
23
2
READY TO SET OFF
Instruments and controls
   1.   Distance recorder in miles / kilometres. 
  2.   Screen. 
  3.   Fuel  gauge. 
  4.   Coolant  temperature. 
  5.   Rev  counter.  
 INSTRUMENT  PANEL 
  Display  screen 
 In the lower part: 
   -   Time, 
  -   Ambient  temperature, 
  -   Miles  /  Kilometres  travelled, 
  -   Trip  computer  (range,  fuel consumption...), 
  -   Headlamp  beam  height, 
  -   Programmable  overspeed  warning, 
  -   Cruise control or speed limiter, 
  -   Gear  shift  indicator, 
  -   Stop  &  Start.  
 In the upper part: 
   -   Date, 
  -   Service  indicator, 
  -   Alert  messages, 
  -   System  status  messages, 
  -   Vehicle  configuration.    
     
        
        Page 32 of 240

30
   Instruments  and  controls   
  Screen     displays     indicates     Solution - action  
    Temperature  / 
Ice   the ice warning, 
the temperature 
flashing 
accompanied by 
a message on 
the screen.  weather conditions which could 
result in ice on the road. 
 Be particularly vigilant and do not brake sharply. 
 "Safety - Driving safely". 
    Date  /  Time   a setting: date, 
time.  a configuration via the "MODE" 
menu. 
 "Technology on board - Vehicle configuration" section. 
    Headlamp  beam 
height   a  headlamp 
height setting.  a position from 0 to 3 depending 
on the load carried .  Adjust using the buttons on the MODE control panel. 
 "Ease of use and comfort - Steering mounted controls" 
section. 
    Service  spanner   a  service 
spanner which 
remains on.  that a service will soon be due. 
 Refer to the list of checks in the warranty and 
maintenance record, then have the service carried out. 
    Stop & Start   on. 
 engine going into STOP mode 
after the the vehicle stops.   As soon as you want to move off, the warning lamp 
goes off and the engine restarts automatically in 
START mode. 
 flashes for a few 
seconds, then 
goes off.   STOP mode temporarily 
unavailable or automatic 
operation of START mode. 
 Special cases for STOP mode and START mode. 
 "Ready to set off - Starting and stopping" section.  
     
        
        Page 48 of 240

46
   Steering  mounted  controls   
 HEADLAMP  BEAM 
 You are advised to adjust the height of the 
headlamp beams in accordance with the 
load in your vehicle. 
 This function works in the dipped and main 
beam headlamps position.  Press these controls, located 
on the dashboard, several times 
in succession to adjust the 
headlamps. 
 An indicator lamp on the screen 
indicates the adjustment position 
selected (0, 1, 2, 3). 
 PARKING  LAMPS 
 This system enables you to leave the lamps 
on when parked; with the ignition off, key in 
the STOP position or key removed. 
 Move the ring on the lighting stalk to 
position O then to dipped or main beam 
headlamps.   The warning lamp on the 
instrument panel comes on.   
 The lamps will remain on while 
you are parked. 
 Leaving the lighting on for long periods may 
significantly reduce the state of charge of 
your vehicle's battery.     Travelling  abroad 
 If using your vehicle in a country 
that drives on the other side of the road, 
the headlamps must be adjusted to avoid 
dazzling on-coming drivers. 
 Contact a PEUGEOT dealer or a qualified 
workshop.    
     
        
        Page 71 of 240
69
3
EASE OF USE 
and
 COMFORT
Seats
 DRIVER'S  SEAT 
  Head  restraint 
 Press the tab to adjust the height of the 
head restraint. 
 To remove the head restraint, press the tabs 
and raise the head restraint.  
  Adjustable  armrest 
 Raise or, lower the armrest. 
 Turn the wheel located under the end of the 
armrest to lock it in the desired position.   
     
        
        Page 72 of 240
70
   Seats   
  Lumbar  support 
 Turn the control.  
  Seat cushion height adjustment 
 Lift the handle  1  to raise or   
lower the front of the seat. 
 Lift the handle   2  to raise or   
lower the rear of the seat.  
  Heated  seat 
 Use this control to switch the heating of the 
seat on or off.  
  Seat with variable damping 
 If your seat is fitted with this system, turn the 
control to adjust the level of damping to suit 
the driver's weight.  
  Seat  back  angle 
 Turn the control to adjust the angle of the 
seat  back.  
  Forwards-backwards  adjustment 
 Lift the control bar, located under the seat, 
and adjust to the required position.  
  Rotating  seat 
 If fitted on your seat, press the control to 
rotate the seat by 180°.