2014 Peugeot 3008 Hybrid 4 fog light bulb

11
Practical information209
Changing a bulb
Model with halogen headlamps
1. Direction indicators (light-emitting diodes - LEDs).2. Main beam headlamps (HB3).3. Dipped beam headlamps (H7).4. Daytime running lamps/sidelamps (light-emitting diodes - LEDs).5. Foglamps (PS24W).
Front lamps
Before doing any work on your vehicle, switch off the ignition ( Ready lamp off) to avoid any risk of injury resulting from automatic operation of the engine.
The headlamps are fitted with polycarbonate glass with a protective coating:  do not clean them using a dr y or abrasive cloth, nor with a detergent or solvent product, use a sponge and soapy water or a pH neutral product,  when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals.
Changing a bulb should only be done after the headlamp has been switched off for a few minutes (risk of serious burns).  Do not touch the bulb directly with your fingers, use a lint-free cloth. It is imperative to use only anti-ultraviolet (UV) type bulbs to avoid damaging the headlamp. Always replace a failed bulb with a
new bulb with the same type and specification.

Practical information
212
Rear lamps
1. Brake lamps / sidelamps (light - emitting diodes - LEDs). 2. Reversing lamps (W16W).3. Direction indicators (P21W).4.S idelamps (light-emitting diodes - LEDs).5. Foglamps (P21W).
Changing reversing lamp and direction indicator bulbs
 Raise the tailgate.  Remove the plastic cover.  Unscrew the two fixing nuts.  Extract the lamp unit carefully from the outside.  Disconnect the bulb holder connector.
- Turn the the lamp unit over. - Press the five tabs and remove the bulb h o l d e r.
- Reversing lamp (2) : pull on the bulb to
remove it. - Direction indicator (3) : turn the bulb a quarter of a turn (anti-clockwise) to remove it.
To refit, carry out these operations in reverse o r d e r.

11
Practical information213
Changing the third brake lamp (light emitting diodes - LEDs)
Changing sidelamp and brake lamp/sidelamp bulbs Changing foglamp bulbs
For the replacement of these LED (light-emitting diode) lamps, contact a PEUGEOT dealer or a qualified workshop.
 Reach under the bumper.  Turn the bulb a quarter of a turn and pull it out.
Contact a PEUGEOT dealer or a qualified workshop.
Changing the number plate lamp bulbs (W5W)
 Insert a thin screwdriver into one of the outer holes of the lens.  Push it outwards to unclip.  Remove the lens.  Pull the bulb out and change it.

Visual search
368
Exterior
Remote control key 90 -94 - opening / closing - anti-theft protection - starting - battery
W i p e r 1 1 6 - 1 1 8 Changing a wiper blade 120, 226
Boot, tailgate 103 -104 - opening / closing - emergency release Temporary puncture repair kit 197-202 Changing a wheel 203 -207 - tools - removing
Parking sensors 183 -184 Towbar 229 Recovery on a flatbed 227-228 Reversing camera 185 Parking space sensors 186
Changing bulbs 212-213 - rear lamps - 3 rd brake lamp - number plate lamps - foglamps
Fuel tank 98 -99 Misfuel prevention 99
Door mirrors 88
Exterior welcome lighting 113 Door mirror spotlamps 122 Lighting 108 -112 Headlamp height adjustment 115 Very cold climate screen 232 Changing bulbs 109-111 - front lamps - foglamps - direction indicator repeaters
D o o r s 1 0 0 - 1 0 2 - opening / closing - central locking - emergency control Alarm 96 -97 Electric windows 98 -99
ESC: ABS, EBA, ASR, CDS 154-156 Tyre pressures 239 Under-inflation detection 152-153 Snow chains 208
Accessories 233-234 Roof bars 231 Panoramic sunroof 131