2014 Peugeot 208 engine

86
Display in the instrument panel
Gear lever positions
N. Neutral
R. R everse
1 2 3 4 5.
g
e
ars in manual mode
AUTO.

T
his comes on when the automated
mode is selected. It switches off on
changing to manual mode. F

T
o start the engine, place the lever in
position N .
Moving off
If the engine does not start:
F

P

lace your foot on the brake
when this warning lamp flashes
(e.g.: starting the engine).
There is an audible signal on
engagement of reverse. When moving off on a slope, accelerate
gradually while releasing the parking
brake.
F

Sel
ect a mode (position M or A ) or reverse
(position R )
F

R

elease the parking brake. AUTO and 1 or R appear in the
instrument panel.
Stopping - Moving off on a slope
When stopping on a slope, do not use the
accelerator to immobilise the vehicle; apply the
parking brake.
Manual mode
AUTO disappears and the gears
engaged appear in succession in the
instrument panel.
F

A

fter starting the vehicle, select position M
to change to manual mode.
The gear change commands are only carried
out if the engine speed permits.
When driving at low speed, on approaching
a stop sign or traffic lights for example,
the gearbox changes down to first gear
automatically.
F

P

rogressively take your foot off
the brake pedal, then move off.
F

P

ress the brake pedal fully.
F

S

tart the engine.
-

if
N is flashing in the
instrument panel, move
the lever to position A ,
then to position N ,
-

i

f the "Foot on the brake" warning
is flashing in the instrument panel,
press the brake pedal firmly.
Driving

87
In automated mode, you can resume control
temporarily at any time using the steering
mounted control paddles.
The use of these paddles permits manual
selection of the gears in situations which
require a more rapid change-down than in
the automated mode (arrival at a roundabout,
leaving a car park with a steep gradient,
over taking...).
The gearbox engages the required gear if
the engine speed permits. AUTO remains
displayed in the instrument panel.
After a few moments, the gearbox resumes
automatic control of the gears.
For best acceleration, when overtaking
another vehicle for example, press the
accelerator pedal firmly to pass the
point of resistance.
Automated mode
F Following use of manual mode, select position A to return to automated mode.
AUTO and the gear engaged appear
in the instrument panel.
The gearbox then operates in auto-adaptive
mode, without any action on the part of the
driver. It continuously selects the most suitable
gear for:
-
o

ptimisation of fuel consumption,
-

t
he driving style,
-

t
he road conditions,
-

t
he vehicle load.
Creep function* (moving
w ithout use of the
accelerator)
This function makes manoeuvring the vehicle
smoother at low speeds (when parking, in a
traffic jam, …).
With the engine running at idle, brakes
released and A , M or R selected, the vehicle
moves as soon as you take your foot of the
brake pedal (even if you do not touch the
accelerator pedal).
For your safety, this function is activated only
if you press the brake pedal while engaging
for ward drive or reverse.
It is deactivated on opening the driver's
door. Close the door, then press the brake or
accelerator pedal to reactivate the function.
* Only on petrol engines.
"Auto sequential" mode
The vehicle does not move without
pressing the accelerator pedal if the
gear lever had stayed in position N for
more than 2 seconds , with the engine
running and the brake pedal was not
pressed before selecting the position


A,
M or R .
4
Driving

88
You must press the brake pedal firmly
while starting the engine.
Never select neutral N while the vehicle
is moving.
Only engage reverse gear R when the
vehicle is immobilised, with your foot on
the brake pedal.
In all cases, you must apply the parking
brake to immobilise the vehicle.
Operating fault
With the ignition on, if this warning
lamp comes on and AUTO flashes,
accompanied by an audible signal
and a message in the screen, this indicates a
gearbox fault.
Have it checked by a P
e

uge
O
T dealer or a
qualified workshop.
Stopping the vehicle
Before switching off the engine, you can
change to position N to be in neutral.
In this case, you must apply the parking brake
to immobilise the vehicle. AUTO
and - appear in the instrument
panel.
F Sel ect position N.
Reinitialisation
Following disconnection of the battery, the
gearbox must be reinitialised.
F

S
witch on the ignition.
F

P
ress the brake pedal firmly.
F

W
ait approximately 30 seconds until N or a
gear appears in the instrument panel.
F

R
elease the brake pedal.
The gearbox is operational again.
Never leave children unsupervised
inside the vehicle with the engine
running.
Driving

90
engagement of reverse gear is
accompanied by an audible signal.If the engine does not start:
For optimum acceleration, for example
when overtaking another vehicle, press
the accelerator pedal firmly past the
point of resistance.
Display in the instrument panelMoving offAutomated mode
Gear lever positions
N. Neutral
R.
R everse
1 2 3 4 5 6.
g
e
ars in manual mode
AUTO.

T
his comes on when the automated
mode is selected. It switches off on
changing to manual mode.
F

P
lace your foot on the brake
when this warning lamp is
flashing (for example, when
starting the engine). F

T
o start the engine, move the lever to
position N .
- if
N is flashing in the
instrument panel, move
the lever to position A ,
then to position N ,
F

Sel
ect a mode (position A - automated
or
M - manual) or reverse (position R).
F

R
elease the parking brake.
AUTO and 1, 1 or R appears in the instrument
panel screen. F

A
fter starting the vehicle, select position A
for enter automated mode.
AUTO and the gear engaged appear
in the instrument panel screen.
The gearbox is then operating in auto-active
mode, without any action on the part of the
driver. It continuously selects the most suitable
gear, depending on the:
- s tyle of driving,
-

p
rofile of the road.
-

i
f the message "Foot on the
brake"


is displayed, press the
brake pedal firmly.
F

T
ake your foot off the brake pedal,
then accelerate.
F

P
ress the brake pedal down fully.
F
S
tart the engine.
Driving

91
At very low speed, if reverse gear
is requested, this will only be taken
into account when the vehicle is
immobilised. A warning lamp appears in
the instrument panel screen.
Manual gear changingManual mode
On sharp acceleration, the gearbox will
not change up unless the driver acts on
the gear lever or the steering mounted
paddles.
Never select neutral N while the vehicle
is moving.
Only engage reverse gear R when the
vehicle is immobilised with the brake
pedal pressed.
You can change gear manually to overtake,
for example, while still remaining in automatic
mode.
F

O

perate the + or - steering mounted control
paddle.
The gearbox engages the gear requested if the
engine speed permits. AUTO is still displayed
in the instrument panel.
After a few moments without any action on
the controls, the gearbox resumes automatic
control of the gears. F

W

hen the vehicle has moved off, select
position M to change to manual mode.
F

P

ull the lever towards the +

sign to change
up a gear.
F

P

ush the lever towards the - sign to change
down a gear.
The gears engaged appear
successively in the instrument panel
screen.
The gear change requests are only carried out
if the engine speed permits.
It is not necessary to release the accelerator
during gear changes.
When braking or slowing down, the gearbox
changes down automatically to permit
acceleration in the correct gear.
4
Driving

92
Stopping the vehicle
You must press the brake pedal firmly
when starting the engine.
Whatever the circumstances, you must
manually apply the parking brake to
immobilise the vehicle.
Before switching off the engine, you can
choose to:
-

m

ove to position N to engage neutral,
-

l

eave the gear engaged; in this case, it will
not be possible to move the vehicle.
In both cases, you must apply the parking
brake to immobilise the vehicle.
When immobilising the vehicle, with
the engine running, you must place the
gear lever in neutral N .
Before carrying out any work in the
engine compartment, check that the
gear lever is in neutral N and that the
parking brake is applied.
Operating fault
With the ignition on, the flashing of
this warning lamp and the flashing of
AUTO , accompanied by an audible
signal and a message in the instrument panel
screen, indicates a malfunction of the gearbox.
Have it checked by P
e

uge
O
T or a qualified
workshop.
Creep function (moving
without use of the accelerator)
This function makes manoeuvring the vehicle
smoother at low speeds (when parking, in a
traffic jam, …).
With the engine running at idle, brakes
released and A , M or R selected, the vehicle
moves as soon as you take your foot of the
brake pedal (even if you do not touch the
accelerator pedal).
For your safety, this function is activated only
if you press the brake pedal while engaging
for ward drive or reverse.
It is deactivated on opening the driver's
door. Close the door, then press the brake or
accelerator pedal to reactivate the function.
The vehicle does not move without
pressing the accelerator pedal if the
gear lever had stayed in position N for
more than 2 seconds , with the engine
running and the brake pedal was not
pressed before selecting the position


A,
M or R . Never leave children unsupervised
inside the vehicle with the engine
running.
Driving

93
Four-speed automatic gearbox which offers a
choice between the comfort of fully automatic
operation, enhanced by sport and snow
programmes, or manual gear changing.
There are therefore four driving modes:
-
a
utomatic operation for electronic
management of the gears by the gearbox,
-

sp
ort programme for a more dynamic style
of driving,
-

s
now programme to improve driving when
traction is poor,
-

s
equential operation for manual changing
of the gears by the driver.
Automatic gearbox
1. gear lever.
2. B utton "S" (spor t) .
3.


Button "T " (snow) .
Gear selection gate Gear lever
P.
Park.
-
I mmobilisation of the vehicle, parking brake
on or off.
-
S

tarting the engine.
R.

R
everse.
-

R
eversing manoeuvres, vehicle stationary,
engine at idle.
N.

N
eutral.
-

I
mmobilisation of the vehicle, parking brake
on.
-
S

tarting the engine.
D.

A
utomatic operation.
M + / -.

M
anual operation with sequential
changing of the four gears.
F

P
ush for wards to change up through the
gears.


or
F

P
ull backwards to change down through
the gears.
Displays in the instrument panel
When you move the lever in the gate to select
a position, the corresponding indicator is
displayed in the instrument panel.
P.


Park
R.


Reverse
N.
N

eutral
D.
D

rive (Automatic driving)
S.
Sport programme
T .
Snow programme
1 2 3 4.
g
e
ars engaged during manual
operation
-.
I

nvalid value during manual operation
Foot on brake
F Press the brake pedal when this indicator lamp is displayed in the
instrument panel (e.g.: starting
the engine).
4
Driving

94
F Apply the parking brake.
F Sel ect position P or N .
F

S
tart the engine.
If this procedure is not followed, there is an
audible signal, accompanied by the display of
an warning message.
Moving off
When the engine is running at idle, with
the brakes released, if position R , D
or M is selected, the vehicle moves
even without the accelerator being
pressed.
When the engine is running, never
leave children in the vehicle without
supervision.
When carrying out maintenance with
the engine running, apply the parking
brake and select position P .
If position N is selected inadvertently
while driving, allow the engine to
return to idle then select position D to
accelerate.
If the ambient temperature is
below

-23°C, the engine should be left
at idle for four minutes, to ensure the
correct operation and life of the engine
and gearbox. Never select position N while the
vehicle is moving.
Never select positions P or R unless the
vehicle is completely stationary.
Automatic operation
F Select position D for automatic
changing
of the four gears.
The gearbox then operates in auto-adaptive
mode, without any intervention on the part
of the driver. It continuously selects the most
suitable gear according to the style of driving,
the profile of the road and the load in the
vehicle.
For maximum acceleration without touching the
gear lever, press the accelerator pedal down
fully (kick down). The gearbox changes down
automatically or maintains the gear selected
until the maximum engine speed is reached.
On braking, the gearbox changes down
automatically to provide efficient engine
braking.
If you release the accelerator sharply, the
gearbox will not change to a higher gear for
safety reasons.
F

W

ith the engine running, press
the brake pedal.
F

R

elease the parking brake.
F

Sel

ect position R , D or M.
F
g
r

adually release the brake
pedal.
The vehicle moves off immediately.
Driving