2014 NISSAN VERSA NOTE ignition

2To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
arouND view® MoN iTor (if so equipped)
With the ignition switch in the oN position, the
Around View® Monitor is activated by pressing
the C aMera button

01, located on the
navigation unit, or by moving the shift lever to the
r (rever Se) position. The monitor displays
various views of the position of the vehicle.

When the vehicle is in the P (P arK), N (N euTral) or D (D rive) position and the
C aM era button

01 is pressed, the following views will display in order:
new system features

When the vehicle is in the r (rever Se) position and the C aMera button
01 is
pressed, the following views will display in order:

The colored guide lines on the display screen indicate vehicle width and \
approximate
distances to objects with reference to the vehicle body line.
• Red 1.5 ft (0.5 m); Yellow 3 ft (1 m); Green 7 ft (2 m) and 10 ft (3 m).
For information regarding how to access additional viewing cycles, please\
refer to the “ Monitor, climate, audio, phone and
voice recognition systems (section 4)” of your Owner’s Manual.
01
Start from any control Panel screen
Front view & front-side viewPress
Press Press
Front view & bird’s-eye view
Rear view & bird’s-eye view
PressRear view & front-side viewPress
1598304_14b_VersaHatchback_QRG_090613.indd 29/6/13 1:44 PM

3To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
TriP CoMPuTer
With the ignition switch in the oN position, modes
of the trip computer

01 can be selected by
pushing the trip computer change button 02 on the
instrument panel.

The following modes can be selected in the display:
• oD o – records the total distance the vehicle has
been driven.
• Trip a – measures the distance of one specific trip.
• Trip B – measures the distance of a second
specific trip.
• mpg – displays the instant fuel consumption.
• mpg av G – displays the average fuel consumption since the last reset.
• mls
– displays the estimated distance that can be driven before refueling.

To reset TriP a, Tri P B, mpg, or mpg av G go to the desired mode on the trip
computer and hold the change button
02 for more than 3 seconds.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
u SB/ auX Ja CK aND iPoD®
iNTer Fa Ce (if so equipped)
The USB/Aux jack 01 is located on the
center console.

When a compatible USB memory device, iPod®
or auxiliary device is plugged into the USB/Aux jack, compatible audio files stored on the
device can be played through the vehicle’s audio system.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
01
02
01
1598304_14b_VersaHatchback_QRG_090613.indd 39/6/13 1:44 PM

5To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
esse ntial i n for mation
Tire PreSSure M oNiTori NG SYSTe M (TPMS) wiTH
eaSY Fill Tire alerT (if so equipped)
A CHe CK Tire P reS warning message will
appear in the trip computer 01 and the low tire
pressure warning light 03 will illuminate when one
or more tires are low on pressure and air is needed.
• The tire pressures should be checked when the
tires are cold. The tires are considered cold after
the vehicle has been parked for 3 hours or more or
driven less than 1 mi (1.6 km) at moderate speeds.

After tire pressures are adjusted, drive the vehicle
at speeds above 16 MPH (25 km/h). The CH eCK
Tire Pre S warning message and low tire
pressure warning light will disappear.

To only reset the CH eCK Tire Pre S warning
message, press the reset button 02 for more then 1 second.

When adding air to an under-inflated tire, the TPMS with Easy Fill Tire Alert (if so
equipped) provides visual and audible signals to help you inflate the\
tires to the
recommended c OLD tire pressure.
To use the Easy Fill Tire Alert (if so equipped):
1. Move the shift lever to the P (P arK) position and apply the parking brake.
2. Place the ignition switch in the oN position. Do not start the engine.
3. Add air to the under-inflated tire and within a few seconds, the hazar\
d warning lights
will start flashing.
4. When the designated tire pressure is reached, the horn will beep once and the hazard
warning flashers will stop flashing.
5. Repeat this procedure for any additional under-inflated tires.

When the low tire pressure warning light flashes for 1 minute and then \
remains on, the
TPMS is not functioning properly. Have the system checked by a NISSAN dealer.

Tire pressure rises and falls depending on the heat caused by the vehicle\
’s operation and
the outside temperature. Low outside temperature can lower the temperatu\
re of the air
inside the tire, which can cause a lower tire inflation pressure. This may cause the low tire
pressure warning light to illuminate. If the warning light illuminates, \
check the tire pressure
in your tires.
• check the tire pressure (including the spare tire) often and always prior \
to long
distance trips.

The Tire and Loading Information label contains valuable information. Please refer to
section 9, “Technical and consumer information”, in your Owner’s Manual for the location
of the Tire and Loading Information label.
For more information, refer to the “instruments and controls (section 2)”, the “Starting and driving (section 5)” and the
“Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
01
03
02
1598304_14b_VersaHatchback_QRG_090613.indd 59/6/13 1:44 PM

8To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
first drive features
NiSSaN iNTelli GeNT KeY® SYST eM
(if so equipped)
The NISSAN Intelligent k ey® System allows you to lock or unlock your
vehicle and activate the panic alarm. It is important to make sure the
Intelligent k ey is with you (that is, in your pocket or purse).

The operating range of the Intelligent k ey is within 31.5 in (80 cm) from
each request switch.

To lock the vehicle, press the
button
01 on the key fob or push
either door handle request switch 02 once.

To unlock the vehicle, perform one of the
following procedures:
• Push either door handle request switch

02 once;
the corresponding door will unlock. Push the
door handle request switch
02 again within 60
seconds; all other doors will unlock, or
• Press the

button
03 on the key fob to unlock the driver’s side door. Press the

button again; all other doors will unlock.

The Intelligent k ey can also be used to activate the panic alarm by pressing and holding \
the
button
04 for more than 0.5 seconds. Once activated, the panic alarm and
headlights will stay on for a period of time.
INTELLIGENT k EY BATTERY DIS cHARGE

If the battery of the Intelligent k ey is discharged, or
environmental conditions interfere with the Intelligent
k ey operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (ParK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent k ey
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing
the brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting and driving (section\
5)”
and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
02
01
03
04
1598304_14b_VersaHatchback_QRG_090613.indd 89/6/13 1:44 PM

10To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
first drive features
STarTi NG/ST oPPiNG TH e eNGiN e
STARTING THE ENGINE

It is important to make sure the Intelligent k ey is
with you (that is, in your pocket or purse).
cONTINUOUSLY VARIABLE TRANSMISSION
(NISSAN Intelligent k ey
® models only - if so equipped)

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the A cc mode.
• If the ignition is pushed a second time, the vehicle
will enter the ON mode.

Move the shift lever to P (P arK).

Push the ignition switch to start or stop the engine.
MANUAL TRANSMISSION (if so equipped)

Depress the brake pedal.

Depress the clutch pedal to the floor.

Move the shift lever to N (N euTral).

Turn the ignition switch to ST arT.
TURNING THE ENGINE OFF

For a continuously Variable Transmission (NISSAN
Intelligent k ey® models only - if so equipped), apply the brake pedal, move the shift l\
ever
to the P (P arK) position, apply the parking brake and push the ignition ST arT/SToP
switch to turn the engine off.

For a manual transmission, apply the brake pedal, place the vehicle in 1s\
t gear, apply the
parking brake and turn the ignition switch to the loCK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1598304_14b_VersaHatchback_QRG_090613.indd 109/6/13 1:44 PM