2014 NISSAN VERSA NOTE Quick Reference Guide

7To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
CloCK SeT/aDJ uSTM eNT
To adjust the time and the appearance of the clock
on the display:
1. Press the MeNu button

01
2. Touch the “Settings” key.
3. Touch the “System” key.
4. Touch the “clock Settings” key.

The following settings can be adjusted:
• Time Format: The clock can be set to 12 hours
or 24 hours.
• Date Format: The date can be changed to one of 5 different formats.
• Clock Mode: From here the clock mode options are:
· Manual: Allows for the option “Set clock
Manually”. Touch this to begin setting the clock
manually using the “+” or “–“ to adjust the
hours and minutes up or down.
· Time Zone: Touch the “Time Zone” key

02
to choose from the applicable time zone list,
and/or touch “Daylight savings time” to switch
between on and off.
· a uto: Automatically sets the clock to the vehicles current location.

Press the BaCK button
03 to return to the previous screen.
For more information please refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
03
01
02
1598304_14b_VersaHatchback_QRG_090613.indd 79/6/13 1:44 PM

8To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
first drive features
NiSSaN iNTelli GeNT KeY® SYST eM
(if so equipped)
The NISSAN Intelligent k ey® System allows you to lock or unlock your
vehicle and activate the panic alarm. It is important to make sure the
Intelligent k ey is with you (that is, in your pocket or purse).

The operating range of the Intelligent k ey is within 31.5 in (80 cm) from
each request switch.

To lock the vehicle, press the
button
01 on the key fob or push
either door handle request switch 02 once.

To unlock the vehicle, perform one of the
following procedures:
• Push either door handle request switch

02 once;
the corresponding door will unlock. Push the
door handle request switch
02 again within 60
seconds; all other doors will unlock, or
• Press the

button
03 on the key fob to unlock the driver’s side door. Press the

button again; all other doors will unlock.

The Intelligent k ey can also be used to activate the panic alarm by pressing and holding \
the
button
04 for more than 0.5 seconds. Once activated, the panic alarm and
headlights will stay on for a period of time.
INTELLIGENT k EY BATTERY DIS cHARGE

If the battery of the Intelligent k ey is discharged, or
environmental conditions interfere with the Intelligent
k ey operation, start the engine according to the
following procedure:
1. Move the shift lever to the P (ParK) position.
2. Firmly apply the foot brake.
3. Touch the ignition switch with the Intelligent k ey
and a chime will sound.
4. Within 10 seconds after the chime sounds, push the ignition switch while depressing
the brake pedal and the engine will start.
For more information, refer to the “Pre-driving checks and adjustments (section 3)”, “Starting and driving (section\
5)”
and the “Maintenance and do-it yourself (section 8)” of your Owner’s Manual.
02
01
03
04
1598304_14b_VersaHatchback_QRG_090613.indd 89/6/13 1:44 PM

9To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
rear HaTCH releaS e
(N iSSaN intelligent Key® models only)
(if so equipped)
To open the rear hatch, unlock it with one of the following operations:
• Press the

button
01 on the key fob twice.
• Push the rear hatch request switch

02 while carrying the NISSAN
Intelligent k ey® with you.

Then pull the handle
03 located below the request switch 02.

Pull up on the rear hatch to open.
For more information, refer to the “Pre-driving
checks and adjustments (section 3)” of your
Owner’s Manual.
Sea T aDJ uSTM eNTS
To slide the front seat forward or backward, pull up
on the lever

01 under the front of the seat and slide
forward or backward. Release the lever to lock the
seat in position.

To recline the seatback, pull up on the lever
02 and
lean back. To bring the seatback forward, pull the
lever up and lean your body forward. Release the
lever to lock the seatback in position.
S EAT LIFTER (if so equipped for driver’s seat)

To adjust the seat height, pull up or push down on
the adjusting lever

03 repeatedly.
For more information, refer to the “Safety — Seats, seat belts and supplemental restraint system (se\
ction 1)”
of your
Owner’s Manual.
01
0203
ouTS iD e M irror CoNTrol SwiTCH
Move the switch
01 right or left to select the right
or left mirror.

Adjust each mirror to the desired position using the
switch

02.

Move the switch
01 to the middle “neutral” position
to prevent accidentally moving the mirror.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
0201
02
02
01
03
1598304_14b_VersaHatchback_QRG_090613.indd 99/6/13 1:44 PM

10To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
first drive features
STarTi NG/ST oPPiNG TH e eNGiN e
STARTING THE ENGINE

It is important to make sure the Intelligent k ey is
with you (that is, in your pocket or purse).
cONTINUOUSLY VARIABLE TRANSMISSION
(NISSAN Intelligent k ey
® models only - if so equipped)

Depress the brake pedal.
• If the brake pedal is not depressed, pushing the
ignition switch once enters the A cc mode.
• If the ignition is pushed a second time, the vehicle
will enter the ON mode.

Move the shift lever to P (P arK).

Push the ignition switch to start or stop the engine.
MANUAL TRANSMISSION (if so equipped)

Depress the brake pedal.

Depress the clutch pedal to the floor.

Move the shift lever to N (N euTral).

Turn the ignition switch to ST arT.
TURNING THE ENGINE OFF

For a continuously Variable Transmission (NISSAN
Intelligent k ey® models only - if so equipped), apply the brake pedal, move the shift l\
ever
to the P (P arK) position, apply the parking brake and push the ignition ST arT/SToP
switch to turn the engine off.

For a manual transmission, apply the brake pedal, place the vehicle in 1s\
t gear, apply the
parking brake and turn the ignition switch to the loCK position.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
1598304_14b_VersaHatchback_QRG_090613.indd 109/6/13 1:44 PM

11To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
HeaD liGHT CoNTrol SwiTCH
HEADLIGHT c ONTROL


Turn the headlight control switch to the
position

01 to turn on the front parking, tail, license plate and
instrument panel lights. Turn the switch to the
position 02 to turn on the headlights.
HIGH BEAM SELE cT


Push the headlight control switch forward
03 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull
the headlight switch back to the original position to
select the low beam. The blue indicator light goes off.

Pull and release the headlight control switch
04 to
flash the headlight high beams on and off.
FOG LIGHT SWIT cH (if so equipped)

The headlights must be on and the low beams

selected for the fog lights to operate.


Turn the switch (inside collar) to the position
05
to turn the fog lights on.


Turn the switch (inside collar)
to the oFF position to
turn the fog lights off.
For more information, refer to the “instruments and controls (section 2)”
of your Owner’s Manual.
01
02
05
03
04
wi NDSH ielD wi Per aND waSH er SwiTCH
Move the lever to the following positions to operate
the windshield wipers:

01 Mist (MiST) – One sweep operation of
the wipers.

02 Intermittent (iNT) – Wipers operate
intermittently. The intermittent operation speed
can be adjusted by twisting the time control
ring
03 (if so equipped) to increase or
decrease wiper speed.

04 Low (lo) – Wipers operate at a
continuous low-speed.

05 High (Hi) – Wipers operate at a
continuous high-speed.

06 Washer – Pull the lever toward you
to activate the washer. The wipers will
operate several times.
0301
0405
MiST
oFF
02i NT
lo
Hi
06
09
1598304_14b_VersaHatchback_QRG_090613.indd 119/6/13 1:44 PM

12To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
first drive features
MaNual Cli MaTe CoNTrolS
01 F
aN SPee D CoNTrol D ial

Turn the dial to the left to decrease fan
speed or to the right to increase fan speed.
02 air Flow CoNTrol D
ial

Turn the dial to select the following air
flow outlets:

Air flows from the center and
side vents.

Air flows from the center, side, and
foot vents.

Air flows mainly from the foot vents.

Air flows from the defroster and foot vents.

Air flows mainly from the defroster vents.
03 Te
MPera Ture CoNTrol D ial

Turn the temperature control dial left for cooler air or right for warmer\
air.
04 D
eFroSTi NG/DeFoGG iNG FroNT aND S iD e wi NDowS

First, move the air intake lever
05 to the
left position to draw fresh air into the vehicle.


Then turn the air flow control dial
02 to the front window defroster mode
.

When the
or
position is selected, press the a/C button (if so equipped) to turn

the air conditioner on for better performance. This will dehumidify the air and help defog
the windows.
06 rear wi
NDow aND ouTS iD e M irror (if so equipped) D eFroSTer SwiTCH

Push the rear window defroster switch
to turn the system on or off.
07 a/C B
uTToN

Press the a/C button to turn the air conditioner on. This system helps cool and
dehumidify the air inside the cabin and defog the windows.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
01
0203
0405
0607
REAR WINDSHIELD WIPER AND WASHER

07 Intermittent (iNT) – Rear wiper
operates intermittently.

08 Low (oN) – Rear wiper operates at
a continuous low-speed.

09 Push the lever forward to activate
the rear washer. The rear wiper will operate several times.
For more information, refer to the “instruments and controls (section 2)” of your Owner’s Manual.
iNT
oN07
08
1598304_14b_VersaHatchback_QRG_090613.indd 129/6/13 1:44 PM

13To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
FM/aM/SiriusXM* Sa TelliTe raDio wiTH CD Pla Yer
(if so equipped)
01 vol/oN•oFF CoNTrol D
ial
Press the vol/oN•oFF control dial to turn the system on or off.

Turn the vol/oN•oFF control dial to the right or left to increase or decrease the volume.
02 Tu
Ne KN oB/auDio B uTToN
To manually tune the radio, turn the Tu Ne knob left or right.
03
SeeK Bu
TToNS

To tune and stop at the next or previous broadcasting station, press the seek
buttons
or .

For SiriusXM Satellite Radio, to switch to the first channel of the previous or next
category, press the seek buttons
or .

To change tracks on a c D, press the seek buttons or .

When the seek buttons or are pressed and held while a c D is playing, the cD will
rewind or fast forward. When the button is released, the c D will play at normal speed.
04 ST
aTioN M eM or Y K eYS
Twelve stations can be set for the FM band, six for the AM band and eighteen for SiriusXM
Satellite Radio.

To store a station in a preset first select a radio band by pressing the FM•aM
05 or
XM button
06, then tune to the desired FM, AM or SiriusXM Satellite Radio station.

Now select and hold the desired station memory key (1-6) until the preset number is
updated on the display and a beep is heard. Programming is now complete.\


To retrieve a previously set station, select the radio band where the preset was stored
then press the corresponding station memory key (1-6).
*SiriusXM Satellite Radio is only available on vehicles equipped with optional Siri\
usXM Satellite Radio subscription service.
For more information, refer to the “Monitor, climate, audio, phone and voice recognition systems (section 4)” of your
Owner’s Manual.
01
05
03
06
02
04
1598304_14b_VersaHatchback_QRG_090613.indd 139/6/13 1:44 PM

14To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
CruiSe CoNTrol (if so equipped)
The cruise control system enables you to set a
constant cruising speed once the vehicle has
reached 25 MPH (40 km/h).

The system will automatically maintain the set speed
until you tap the brake pedal, accelerate, cancel or
turn the system off.

To activate the cruise control, push the C ruiSe
oN/oFF switch
01. The CruiSe indicator light
in the instrument panel will illuminate.

To set cruising speed, accelerate the vehicle to the desired speed, push \
the CoaST/S eT
switch
02 and release. Take your foot off the accelerator pedal. Your vehicle will maintain
the set speed.

To reset at a faster cruising speed, push and hold the a CCel/reS switch
03.
When the vehicle attains the desired speed, release the switch.

To reset at a slower cruising speed, push and hold the CoaST/S eT switch
02.
Release the switch when the vehicle slows to the desired speed.

To cancel the preset speed, push the C aNCel switch
04.

To turn off cruise control, push the Crui Se oN/oFF switch
01. The CruiSe indicator
light in the instrument panel will turn off.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
04
03
02
01
first drive features
1598304_14b_VersaHatchback_QRG_090613.indd 149/6/13 1:44 PM