5
POWER FRONT SEAT ADJUSTMENTS
To slide the seat forward or bac kward, push the
control switch
01 forward or backward.
To adjust
the angle of the seatbac k, push the switch
02 forward or backward.
SEAT LIFTER (driver’s seat only)
To adjust the angle and height of the seat cushion,
push the front or rear end of the switch
01 up
or down.
MANUAL LUMBAR SUPPORT (driver’s seat only)
To adjust the lumbar area, move the lever 03 up or down.
For more information, refer to the “Safety –– Seats, seat belts and supplemental restraint system (section 1)”\
of your
Owner’s Manual.
0102
03
2ND ROW SEAT ADJUSTMENTS (if so equipped)
To recline the seatback, pull up on the recline handle
01 and lean back. To bring the seatback forward, pull
the handle up and lean your body forward. Release
the handle to lock the seatback in position.
TIP UP FOR EASY ENTRY/EXIT OF THE 3RD ROW
1.
Raise the armrest (capt
ain’s chairs – if so equipped)
so it is parallel to the seatback and in the stowed position.
2.
T
hen lift up on the seatback latch
02 located on the
upper corner of the seatback and fold the seatback
forward onto the seatbase.
3.
Finally
, lift up on the lower corner of the seat base
and fold the seat forward.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
01
02
1590747_14b_Armada_QRG_011614.indd 51/16/14 10:41 AM
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
6
FIRST DRIVE FEATURES
3RD ROW POWER FOLDING SEATS (if so equipped)
Before operating the 3rd row seats:
•
Make sure the 2nd row seatbac
k is not reclined.
•
Lower the 3rd row headrest to the full down position.
•
Disconnect and secure the center seat belt and tongues into the retracto\
r base. Always
reconnect the center seat belt when the seat is returned to the upright \
position.
•
Make sure that there are no objects on the seatbac
k cushion.
The 3rd row power folding seat controls are located behind the 2nd row seat (passenger’s side) on the
3rd row cup holder console
01 and on the rear
quarter trim panel behind the 3rd row seats
(passenger’s side)
02.
To fold down the 3rd row seats, push and hold the
bottom portion of the switch.
To raise the 3rd row seats, push and hold the top portion of the switch.
If the ignition switc h is in the OFF position, the
power folding seats are always operational.
If the ignition switc h is in the ON position, the power
folding seats are only operational when the shift
lever is in the P (PARK) or N (NEUTRAL) position.
For more information, refer to the “Safety –– Seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
AUTOMATIC DRIVE POSITIONER (if so equipped)
Two positions for the driver’s seat, accelerator and
brake pedals and outside mirrors can be stored in
the automatic drive positioner memory.
Follow these procedures to set the memory positions:
•
Confirm the shift lever is in the
P (PARK) position.
•
Place the ignition switc
h in the ON position.
•
Adjust the driver
’s seat, accelerator and brake pedals and outside mirrors to the desired
positions using the adjusting switches for each feature.
•
Push the
SET switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
•
T
he indicator light on the memory switch you select will illuminate for approximately 5 seconds.
•
T
he driver’s seat, accelerator and brake pedals and outside mirror positions are no\
w set to
your preference.
These memorized positions can also be linked to your NISSAN Intelligent Key®.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
01
02
1590747_14b_Armada_QRG_011614.indd 61/16/14 10:41 AM
To view detailed instructional videos regarding these and other features, please go\
to www.nissanownersinfo.mobi
