Page 6 of 20
D - Push to select the blower speed
E
-
Push to select the position and
amount of air flowing from the
vents
F
-
Push to defog windshield.
G
-
w hen the a U to switch is
pressed, the settings are
automatically controlled.
Passenger’s side temperature
will be changed to the same
temperature set as the driver’s
side
H
-
Push to defog the rear windows.
A
-
Push to select the desired temperature
B
-
Push to select outside air (
i
ndicator light off) or recirculated
air (
i
ndicator light on)
C
-
Push for air conditioning
on
/
off t
he outside rearview
mirrors can be adjusted
when the ignition switch
is in the “
on ” or “ acc ”
position or the operation
mode is put in
on or
acc
.
m
ove the lever ( a ) to the
same side as the mirror
you wish to adjust.
4CONTROLS
Regular headlights windshield wipers
the wipers will operate once.
INT : i ntermittent intervals can be
adjusted by turning the knob A
AUTO:
t he wipers will be operated
automatically by rain sensor
(if equipped).
s
low
f
ast
Rear window wiper and washer
A
Adjust switch
turn the knob B to operate the rear
window wiper.
t
he wiper operates continuously
for several seconds then operates
intermittently at intervals of about 8
seconds.
washer fluid is sprayed, the wiper will
automatically operate 2 or 3 times.
automatic headlights (if equipped)
headlights and other lights on.
Parking, tail, front and rear sidemarker lights, license plate
and instrument panel lights on.
h
eadlights and other lights turn on and off automatically
in accordance with outside light level.
a
ll lights off
Pull lever toward driver to activate high beams.
AUTO
OFF
Dual-Zone automatic climate controls (if equipped)
s
ide m irror a djustment
AA
BGFH
DEC
Page 7 of 20
5
A - CANCEL: to deactivate the acc or
cruise control
B - RES +:
t
o increase the set speed or
resume control after cancelling the
acc
or cruise control function.
C - SET-:
t
o set the desired speed and
to reduce the set speed.
D
- ON / OFF: t
o turn cruise control
on or off
E - ACC Distance Switch
- Used to set or change the following distance between your vehicle and\
the vehicle in
front of you.
To set a cruising speed
1.
Press D and the “ACC” (if equipped) or “CRUISE” indicators will appear in the multi information display.
2.
a ccelerate or decelerate to your desired speed (above 25 mph). Press C and remove your
foot from the accelerator pedal.
T
o accelerate or decelerate speed
Push up B to increase set cruising speed.
Push down C to decrease set cruising speed.
To cancel the cruising speed Press A or press brake pedal, or press D .
OWN THE ROAD
– :SHIFT DOWN + :SHIFTUP
Paddle shifters (gt only)
s
eat h eater s witch
Position - Action
(hi ) - f or quick heating
(
ne U t R al )
-
h eater off
(
lo )
-
t
o keep the seat warm
Drive mode selector (if equipped)
the drive mode can be switched
by pressing the drive mode button
while the ignition switch is in the
on
position.
Pressing the button will change the
drive mode in order to:
a
wc eco , no R mal , snow
,
lock
adaptive cruise control (if equipped)
AB
C
D
E
simply upshift or
downshift with a tap of
your fingers – without
moving your hands from
the steering wheel.
Y
ou can return to the “D”
operation by pulling the +
(
shift UP) side paddle
shifter rearwards (toward
the driver) and holding for
over 2 seconds.
Page 12 of 20
1. Park your vehicle in a safe place and turn the ignition switch to
lock
position.
2.
c onnect the cable
(cable is not included with the vehicle) to the
U
sb
memory device
or the Dock connector to the iPod .
3.
o
pen the cover
in the floor console box. connect the cable to
the U
sb
input terminal
.
4.
t
urn the ignition switch to the “
acc ” position. t
urn on the audio
system.
5.
Press E
several times to switch to the U sb mode. t he input mode
changes as follows:
CD USB Bluetooth® (if equipped)
6.
Depending on your U
sb
device, it may take longer for playback to
start.
7.
o
nce the device is selected, playback starts.
With Display Audio System, follow steps 1 through 4 above
5.
Press MENU
on the touch screen.
6.
t
ouch USB.
7.
t
ouch
then select a track and begin playback.
10AUDIO SYSTEM
NOTE: Please refer to your o wner’s m anual for more detailed information on
how to use your audio system.
Usb and iPod input (if equipped)
audio Remote
c
ontrol b utton
(if equipped)
VOLUME UP
VOLUME Down
SEEK
c
hange
station or
track MODE
c
hange the
audio source
C
D
B
E
A
To enter frequencies into the memory (AM/FM/SAT)
1.
Press A
to turn on the audio system.
2.
Press B
to select the desired band ( am / fm / sat ).
3.
Press C
to s eek s tation
4.
h old down one of the m emory select buttons D (1-6) until it
beeps in order to save that station to memory.