2014 MITSUBISHI OUTLANDER ECU

8
1. slide the seat all the way to the rear by pulling up on the sliding
lever located under the bottom of the seat and pushing to the back.
2.

Pull up on the front edge of the bottom seat cushion and raise it up.

t

hen lift the back side of the bottom seat cushion up and flip it over \
toward the front side as you rotate the bottom seat cushion into the
foot well area.
3.
o nce the seat cushion is flipped forward, slide the lever ( a ) which
is now visible, forward into the “seat flat” position to lock th\
e seats
down. 1.
Remove h eadrests from storage hook on folded seat cushion.
2.
Raise the seatback until it locks into place.
3.

m ake sure the seat belt buckles are up (D) ( f igure 3) and gently
lift the seat cushion and fold it back into position making sure the
hook (
e ) slides below the seatback bottom. Press down on the seat
cushion to lock into place.
4.

Replace headrests.
1.


Remove the head restraints.
2.


Pull up the strap (
a ), then fold the seatback forward.
3.
t
o return, pull the strap (
b ), then raise the seatback until it locks
securely into place.
FOLDING AND STOWING THE SECOND AND THIRD ROW SEAT (if equipped)
f

olding the second row seats Unfolding the second row seats
f

olding the third row seat
A
BC
A
B
4. Remove the headrests by pushing the button on the headrest post
and then lifting up on the headrest simultaneously
. Place the
headrest out of the way. (
t he middle headrest can remain in the
lowest position).
5.
n ow pull the lever on the top of the backrest ( b ) and lower the seat
forward so it lays flat.
6.
g rab the headrest and face it forward. f ind the slit on the bottom
rear of the headrest and place it on the metal hook located on the
middle part of the folded seat cushion (
c ). Place your other hand on
the back of the headrest and gently push it down until you hear and
or feel it lock into place.
D
E
figure 3

15NAVIGATION SYSTEM (if equipped)
g

uidance
s
tart
s
creen
this is the screen displayed when the location to set as the destination \
is decided.
t

his section explains the operations you can do on this screen.
1.

Location information


w hen such location information as the “establishment name”, “str\
eet name”,
“city name”, “country name”, “latitude”, “longitude\
”, or “telephone number”
has been obtained, it is displayed.
2.
Start


t he search is executed and route guidance is started.
3.
Dial


i f a mobile phone is connected, you can call the establishment.
→

“Call a Telephone Number Registered on the Map”
Refer to the

n avigation o wner’s m anual for further instructions.
4.

Home


i f your home is not registered, you can register the searched for locatio\
n as your home.
5.

Show Route


s ets the currently searched for location as the destination and shows a s\
imple sketch of the route. You can check the route and change the
search conditions.
→

“Show Route”
Refer to the

n avigation o wner’s m anual for further instructions.
6.

Itinerary List
Y

ou can change the destination, add waypoints, and change the route searc\
h conditions.
→

“Set and Change a Waypoint”
Refer to the

n avigation o wner’s m anual for further instructions.
7.

Address Book
Registers the search for location in the address book.
→

“Set an Address in the Address Book”
Refer to the

n avigation o wner’s m anual for further instructions.
8.

Adjust *
Y

ou can scroll the map and change the location.
*

w hen the destination setting is set when scrolling the map, it is not dis\
played.
1)
3) 5)6)
7)
8)
4)
2)