A - CANCEL: to deactivate the cruise control
B - ACC RES: to increase the set speed or resume
previously set cruise control operation.
C
- COAST SET: t
o set the desired speed and to
reduce the set speed
D
- ON/OFF: t
o turn
on / off cruise control
To set a cruising speed
1.
Press D and the CRUISE indicator light in the
meter cluster will be turned on.
2.
a ccelerate or decelerate to your desired speed
(above 25 mph). Press C and remove your foot
from the accelerator pedal.
To accelerate or decelerate speed
Press B to increase set cruising speed.
Press C to decrease set cruising speed.
To cancel the cruising speed
Press A or press brake pedal, or press D .
6OWN THE ROAD
– :SHIFT DOWN + :SHIFT UP
Paddle shifters (if equipped)
s
eat h eater s witch
Position - Action
(hi ) - f or quick heating
(
lo )
-
t
o keep the seat warm
Drive mode selector (if equipped)
the drive mode can be selected by pressing the
switch while the ignition switch is in the on
position.
2WD:
t his mode is for economical driving on
normal dry roads and freeways.
4WD AUTO:
t his mode is for all driving conditions
on various roads.
4WD LOCK:
t his mode is for driving in slippery
conditions such as on snow-covered roads or sand.
cruise control
AB
C
D
simply upshift or downshift
with a tap of your fingers,
without moving your hands
from the steering wheel.
Y
ou can return to the automatic
shifting mode by pulling the +
(
shift UP) side paddle shifter
towards you and holding for
over 2 seconds.
12FAQ’s
Q: What should I do when my engine is hard to start?a: Pressing on the accelerator pedal about half way down while cranking the\
engine may make it easier to start. w hen the engine starts, release your foot
from the accelerator pedal.
Q:
Is my phone compatible with the factory Mitsubishi Bluetooth® Hands Free System?a
:
c
heck the phone approval list, www.mitsubishicars.com/owners to see if the phone is b luetooth® approved.
Q.
Why doesn’t my device (USB, iPhone, Bluetooth® Audio, etc.) work?a
:
Y
ou need to press the
m
ode button to select the appropriate device you want to use.
Q:
How do I use Bluetooth® Audio (if equipped)?a
:
turn the
a
udio
s
ystem power on. Press the c D button several times until b ( b luetooth®) is shown. connect your bluetooth® device via pairing mode.
Playback will start automatically.
Q:
How do I transfer calls from Bluetooth® back to my mobile phone’s handset?a
:
w
hile on the call, press the speech button on your steering wheel and, on\
ce prompted, say “ transfer c all.”
Q:
Why does the FUSE Hands-free Link System
™ take so long to upload my music from my audio music device?
a
:
t
he
m
itsubishi system can read multiple device structures in order to catalog\
the music files for easy playing and listening. Depending on the amount
of music you have on your device, this may take a few minutes.
Q:
What are the different ways of playing music from my portable music play\
er through the stereo system in my vehicle, when equi
pped with the FUSE Hands-free
Link System™?
a
:
t
here are three ways of playing music through your vehicle’s sound system.
• USB
port
-
The
FUSE
system
will find the songs in your device and categorize them according to Artist, Album, and Genre. Then you can have
the
f
U
se
system find and play the song in your device that you prefer without \
physically searching your device. t his is done via voice commands.
n
ote:
i
n this mode the storage device will also be charged.
• Bluetooth
® streaming - once your device is paired to the fUse system, you can stream music from your device through the fUse system to your
vehicle’
s sound system. n o wires or cords. Your music stops and restarts at the same song when you exit and when you\
re-enter the vehicle. Voice
commands are not available.
• RCA
auxiliary ports (if equipped) - Music can be played through a vehicle’s stereo system via the head phone port of your music device (An RCA
to mini headphone jack adapter cable will be needed) Voice command is not available.
Q:
Why can’t I control the music track selection via voice commands whil\
e Bluetooth® streaming?a
:
t
he
m
itsubishi system is not configured to support this functionality.
Q:
My Lancer is equipped with “Micron Air Filtration”. Where is the fi\
lter located and does it need servicing?a
:
t
he micron air filter is a small filter element which is located in t\
he
h
V
ac
box just behind the glove box. t he filter should be inspected frequently for
debris.
t
he filter works well at filtering incoming air however the filter \
will clog and lead to reduced outlet air volume if not serviced on a regular basis.