2014 MITSUBISHI LANCER Owners Handbook

7TECHNOLOGY
multi-information meter switch (info button)
k
eyless e ntry s ystem
[F.A.S.T.-Key]
[Normal Key]
LOCK
Press:
o nce – l ock all doors
UNLOCK
Press:
o nce – Unlock driver door


t
wice – Unlock all doors
TRUNK (except Sportback)
Press twice to open trunk lid.
P

ANIC
Press and hold. Press any button to
turn off panic.
to lock or unlock the doors while
carrying the f. a . s . t.-key , press the
driver’s or front passenger’s door
lock/unlock switch A .
c

hange display
information by pushing
the
info button:
warnings,

o dometer/
tripmeter

, s ervice
Reminder,
e ngine c oolant
temperature,

a
verage
and

m omentary f uel
c

onsumption, Driving
Range and
a
verage s

peed, etc.
eco Driving
when the eco indicator light
is on, your current driving style
supports good fuel economy
.
multi-informationmeter
A
tire Pressure m onitoring s ystem ( t P ms )
the tire Pressure m onitoring s ystem light illuminates when one or more
of your tires is significantly underinflated. Please note that changes in the
outside temperature may decrease tire pressure causing the

t P ms light to
turn on.
i f the t P ms light remains illuminated, check your tire pressure.
warning light
illuminates when tire pressure is

too low.i f warning light
illuminates, contact your local
m itsubishi dealer.
(
m ay be a t P ms system
issue or malfunction).

8AUDIO SYSTEM
NOTE: Please refer to c omfort c ontrols in your o wner’s m anual for
more detailed information on how to use your audio system.
audio Remote
c

ontrol s witch
(if equipped)VOLUME UP
D
ownSEEKchange station
or track
MODE
c

hange the
audio source

C
D
B
A
To enter frequencies into the memory (AM/FM/SAT)
1.

Press A

to turn on the audio system.
2.

Press B

to select the desired band ( am / fm / sat ).
3.

Press C

to s eek s tation
4.
h old down one of the m emory select buttons D (1-6) until it
beeps in order to save that station to memory. 1.

Park your vehicle in a safe place and turn the ignition to the
lock
position.
2.
c onnect the cable
 (cable is not included with the vehicle) to the Usb
memory device
 or the Dock connector  to the iPod .
3.
o
pen the glove box
 and connect the cable  to the Usb input
terminal
.
4.
t
urn the ignition switch to the “
acc ” position. t
urn on the audio
system.
5.


Press B

several times to switch to the U sb mode. t he input mode
changes as follows:
CD  USB  Bluetooth® (if equipped)
6.

Depending on your U

sb
device, it may take longer for playback to start.
7.
o
nce the device is selected, playback starts.
With Display Audio System, follow steps 1 through 4 above
5.

Press MENU

on the touch screen.
6.
t
ouch USB.
7.

t
ouch

then select a track and begin playback.
Usb and iPod input (if equipped)








9DISPLAY AUDIO SYSTEM (if equipped)
system settings
system related settings, such as the operation sound and the
time, can be made.
1.

Press the
MENU key. t he top menu is displayed.
2.
t
ouch
Setting, and then System Setting.
listening to the Radio
this explains how to listen to am and fm radio broadcasts. hD Radiotm
broadcast or analog broadcast can be received.
1.

Press the

MENU key.
t
he top menu is displayed.
2.
t
ouch

AM or FM.
t
he radio broadcast information screen is displayed.
3.
t
ouch

TUNE to tune in a station.
t
he station at the selected frequency is
played.
PSD

Program

s
ervice Data:
c
ontributes to the superior user
experience of
h
D Radio
t
echnology

. Presents song name, artist,
station
i
Ds,
h
D2/
h
D3
c
hannel
g
uide, and other relevant data
streams.
HD2/HD3

a
djacent to traditional main stations are extra local
fm

channels.
t
hese
h
D2/
h
D3
c
hannels provide new, original music
as well as deep cuts into traditional genre.
Digital Sound

Digital,

c
D-quality sound.
h
D Radio
t
echnology enables local
radio stations to broadcast a clean digital signal.

am
sounds like
today’s
fm
and
fm
sounds like a
c
D.
The system setting screen is displayed.
This is a setting item displayed by touching Time Setting.
Settings name Settings value Settings content
Time
Adjustmen tTime
Touch the corresponding or and change the date and time.
Time Display
Settings Date
The date and time display format can be set.
Time12h or 24h display can be set.
this hD Radio receiver enables:

10
**see navigation owner’s manual
DISPLAY AUDIO SYSTEM (continued) AND NAVIGATION SYSTEM (if equipped)
fm
Radio b roadcast i nformation s creen (Display a udio s ystem only)
3)
4) 1)
8)
6)
5)
2)
9)7)10) 16)11),12)13)14)
17)
15)
1. Source plate - Displays the name of the currently selected source, preset channel
number, reception frequency, and station name.
2.

HD Radio TM indicator - Displayed during digital sound output.
3.
Preset switch - a llows you to register your favorite broadcast stations.


t
ouch and hold the switch for the desired preset channel number until you\
hear
the “beep”.

t his registers the broadcast station currently being received.
**

→“Register Your Favorite Broadcast Stations”
4.

 - touching it displays the sub-menu. t he Scan, Radio Setting, Sound
Control settings can be made.
5.

- Used to change the frequency. t
ouching and holding until you hear the
“beep” starts automatic station selection (seek).
**

→“Starting the Seek”
6.

SSN - Displays the ssn ( s hort s tation n ame) that is currently being received.
i

f there is a sub-channel, “the received channel number/total number o\
f sub-
channels” is displayed.
7.

PTY - Displays the P t Y (Program t
ype) being received.
8.


Info - s witches to information display.
9.

Station List
- Displays a list of the stations that can be received.
**

→“Search for Broadcast Stations from the Station List”
10.

FM1, FM2 - a llows you to register your favorite 6 stations for each band.
11.

Title - Displays the acquired title name.
12.

Radio Text - During analog reception, “ t
itle” changes to “Radio
t
ext”, and the
acquired radio text is displayed.

t he “artist” and “album” are not displayed.
13.

Artist - Displays the acquired artist name.
14.

Album - Displays the acquired album name.
15.

Indicator - LIVE:
l ive event broadcasts are displayed as they are received.
RBDS:

R b D s data is displayed as it is received.
16.

Switch page - i f the title, artist name, and album title cannot fit in one page, the \
display can be switched to Page 2 and beyond.
17.

Preset - s witches to preset display.
** s ee Display a udio o wner’s m anual.
search for a location (navigation system only)**
Way Points – once you have set a destination, you can enter
additional stops along the way called way Points.
Saving Addresses
- t
o save an address, first enter the address into
the system.

t hen touch Address Book and confirm location to be
stored.
t
ouch
Set to Address Book to complete.
Set Your Home as the Destination
You can set your pre-registered home as the destination.
1.

Press the
key.


t his displays the destination menu.
2.
T
ouch Go Home. t his displays the guidance start screen.
3. Touch Start.the search for the route
with your home as the
destination is complete and
route guidance
starts.
NOTE
• If a route using the HOV lane is in the search result with
set conditions, a message
confirms the use of the
ho V
lane is displayed.
Y

es: s earch for a ho V lane
route.
No:

s earch for a non- ho V
lane route.

11BLUETOOTH® OPERATION WITH DISPLAY AUDIO AND NAVIGATION SYSTEM (if equipped)
c
alling by e ntering a t
elephone
n umber
1. on the mobile phone screen, enter the telephone number.
2. touch the “OFF HOOK” key.
making a call from a Phonebook
1. Display the vehicle phonebook screen
or the mobile phonebook screen.
**

→ “Display the Phonebook”
2.
s elect and touch the person to call.
incoming calls
the audio guide sounds and the
incoming call screen is displayed.
Registering a bluetooth® Device
Register a bluetooth® device with this product.
1.
Press the
MENU key. t he top menu is displayed.
2.
t
ouch Setting

, and then Bluetooth
® Setting.
3.
touch Register Device
.
4.

Enter the pass key displayed on the screen into the Bluetooth® device.
f

or a list of compatible
b
luetooth
® devices please go to
http://www.mitsubishicars.com/owners
SPEECH button:
c

hange to voice
recognition
PICK-UP button:
a

nswer an
incoming call
HANG-UP button
e

nd a call or voice
recognition
A
B
C
when the connection is complete, a screen is displayed for selecting
the b luetooth® device. for details, refer to the user manual for the b
luetooth® device.
“off hook” key
3. touch the telephone number to call.
4. touch Ye
s.
**see Display audio owner’s manual.
A
B
C
bluetooth® controls

12FAQ’s
Q: What should I do when my engine is hard to start?a: Pressing on the accelerator pedal about half way down while cranking the\
engine may make it easier to start. w hen the engine starts, release your foot
from the accelerator pedal.
Q:

Is my phone compatible with the factory Mitsubishi Bluetooth® Hands Free System?a
:
c
heck the phone approval list, www.mitsubishicars.com/owners to see if the phone is b luetooth® approved.
Q.

Why doesn’t my device (USB, iPhone, Bluetooth® Audio, etc.) work?a
:
Y
ou need to press the
m
ode button to select the appropriate device you want to use.
Q:

How do I use Bluetooth® Audio (if equipped)?a
:
turn the
a
udio
s
ystem power on. Press the c D button several times until b ( b luetooth®) is shown. connect your bluetooth® device via pairing mode.
Playback will start automatically.
Q:

How do I transfer calls from Bluetooth® back to my mobile phone’s handset?a
:
w
hile on the call, press the speech button on your steering wheel and, on\
ce prompted, say “ transfer c all.”
Q:

Why does the FUSE Hands-free Link System
™ take so long to upload my music from my audio music device?
a

:
t
he
m
itsubishi system can read multiple device structures in order to catalog\
the music files for easy playing and listening. Depending on the amount
of music you have on your device, this may take a few minutes.
Q:

What are the different ways of playing music from my portable music play\
er through the stereo system in my vehicle, when equi
pped with the FUSE Hands-free
Link System™?
a

:
t
here are three ways of playing music through your vehicle’s sound system.
• USB

port

-

The

FUSE

system

will find the songs in your device and categorize them according to Artist, Album, and Genre. Then you can have
the

f
U
se
system find and play the song in your device that you prefer without \
physically searching your device. t his is done via voice commands.
n

ote:
i
n this mode the storage device will also be charged.
• Bluetooth
® streaming - once your device is paired to the fUse system, you can stream music from your device through the fUse system to your
vehicle’
s sound system. n o wires or cords. Your music stops and restarts at the same song when you exit and when you\
re-enter the vehicle. Voice
commands are not available.
• RCA

auxiliary ports (if equipped) - Music can be played through a vehicle’s stereo system via the head phone port of your music device (An RCA
to mini headphone jack adapter cable will be needed) Voice command is not available.
Q:

Why can’t I control the music track selection via voice commands whil\
e Bluetooth® streaming?a
:
t
he
m
itsubishi system is not configured to support this functionality.
Q:

My Lancer is equipped with “Micron Air Filtration”. Where is the fi\
lter located and does it need servicing?a

:
t
he micron air filter is a small filter element which is located in t\
he
h
V
ac

box just behind the glove box. t he filter should be inspected frequently for
debris.
t
he filter works well at filtering incoming air however the filter \
will clog and lead to reduced outlet air volume if not serviced on a regular basis.

13
Q: My Lancer has two 12V accessory outlets. What devices can be plugged int\
o these outlets?a: b oth of these outlets are protected with 15 amp fuses. a lways check the current draw rating of any device prior to use in the ve\
hicle. i f the device is
rated
above 12 amps, this could lead to circuit overload and the electrical fuse opening (no current flow).
Q:

I only have one remote for the remote start system on my Lancer
. Can I get a second one?
a

: n o. o nly one remote can be programmed per vehicle for security reasons.
Q:

How can I get the MPG stated on the window sticker?a

:
V
ehicle driving styles will greatly affect m P g . a
void sudden abrupt starts from a stop and let the vehicle coast to the t\
raffic light.
b oth of these styles
will increase mileage and reduce brake lining wear.
• Vehicles
are designed to achieve the best fuel mileage when they are driven at the speed limits on the freeway. Avoid driving over 65 mph.
• Under
inflated tires will increase rolling resistance and will reduce fuel mileage. Check tire pressure frequently to increase miles per gallon.
Proper tire pressure also ensures optimum tire performance (including t\
ire wear

.)
Q:

How does the Navigation System choose a certain route?a

: t he system takes into account traffic conditions, road types, distance \
and road width to recommend the route.
Q:

Why does my Anti-Lock Braking System (ABS) make a noise?a

: e ach time your vehicle is started and driven a short distance, you will h\
ear the sound of the abs motor operating from the right front engine
compartment.
t his is the normal sound the a nti- l ock b raking s ystem makes when performing a self check.
Q:

Why do my Rain Sensing Windshield Wipers operate on their own when it’\
s not raining?
A: • When
the lever is in the AUTO position, the rain sensor detects rain or snow and automatically turns on the wipers.
• The
wipers may automatically operate when things such as insects or foreign objects are affixed to the windshield on top of the rain sensor or
when the windshield is frosted over

.
• To
stop the wipers, place the lever in the OFF position.
Q:

Why does my check engine light come on after I put gas in my car?a

: t here are many reasons why your check engine light may illuminate. b efore calling your dealership, make sure the fuel cap is fully engaged a\
nd
you have heard three clicks when tightening it.
a fter checking and hearing three clicks and driving for a while, if the l\
ight is still on, contact your
dealership.
Q:

How do I use the emergency key when the F
.A.S.T.-key battery or vehicle battery is run down?
a

:
Remove the emergency key from the
f
.
a . s . t
.-key fob and manually unlock the door
. o nce inside the vehicle remove the ignition switch cover
by pressing the release buttons on the top and bottom of the ignition sw\
itch cover.
o nce the ignition switch cover is removed insert the
emergency key into the ignition switch then re-insert (backwards) the \
f
.
a . s . t
.-key fob onto the emergency key
. o nce the f
.
a . s . t
.-key fob
is re-inserted (backwards) turn the emergency key to start the engine.\
FAQ’s

Owner’s Handbook
(5/13)
www .mitsubishicars.c om
2014 LANCER SERIES
2014 LANCER SERIES
Dieline -DO NOT PRINT!