2014 MITSUBISHI LANCER EVOLUTION engine

138 Trip
Check the Histor y
You can check the fuel consumption and Eco
score history.*1
1On the trip screen,
touch
History .
▼
This displays the previously displayed history
screen (with fuel consumption or Eco score
history).
NOTE
• On the eco score history screen, touching
[Mileage History] displays the fuel
consumption history screen.
• On the fuel consumption history screen,
touching [ECO Score] displays the eco
score history screen.
• Eco score history saves the figure
displayed before the engine switch is
turned off.
*1 ECO score is an equipment that only some vehicles have.
Change the Fuel Consumption
Histor y Display
There is a long-term fuel consumption history
and a short-term fuel consumption history.
1On the fuel consumption
history screen, touch
Long-term History .
▼
The display switches from the fuel
consumption (short-term) screen to the
fuel consumption (long-term) screen.
2Touch Short History .
The display switches from the fuel
consumption (long-term) screen to the fuel
consumption (short-term) screen.
Lap Time
You can measure the time, distance, vehicle
speed, and fuel consumption.
1On the trip screen, touch
Lap time .
This displays the lap time screen.
2Touch Start .
▼
Measurement starts. At this time, the
vehicle speed and fuel consumption
are being measured, so they are not
displayed.

152 Maintenance
Equipment by type
Maintenance
You can manage parts replacement timing
for your car.
Displaying
You can check the engine oil, oil filter, etc.
replacement timing.
NOTE
• The distance traveled used in the
maintenance information is calculated
by this product and does not necessarily
match the distance calculated by the car.
• During map updating, program updating,
etc., the distance traveled cannot be
calculated and the distance traveled
during this time is not reflected in the
maintenance information.
1Press the INFO key.
This displays the info menu.
2Touch Maintenance .
▼
This displays the maintenance information.
ADVICE
• When the date approaches on which a
part is scheduled to be replaced or the
travel distance since the last replacement
approaches the distance for part
replacement, this is displayed in yellow.
When that replacement date or distance
is passed, this is displayed in red.
• The communication of the part
replacement timing is sent 10 days before
the scheduled replacement date or when
there are 100 kilometers remaining until
the travel distance for replacement.
3Touch the “part” you want to
look at.
▼
This displays the detailed information.

Maintenance 155
INFO/SETTINGS INFO
Update Maintenance
Information
When parts are replaced, the maintenance
information is updated.
1Press the INFO key.
This displays the info menu.
2Touch Maintenance .
3Touch for the “part” that
was replaced.
4Touch Ye s .
▼
This updates maintenance information.
ADVICE
• When the information is updated, the
current date is set as the “Maintenance
Fixed Date”.
Batch Updating
This updates all the “Engine Oil”, “Oil Filter”,
“Rotate Tires”, “Air Purifier” and “Brake
System” replacement dates, odometer
readings on replacement dates, and remaining
distances until the next replacement.
1Press the INFO key.
This displays the info menu.
2Touch Maintenance .
3Touch Batch .
4Touch Ye s .
▼
Batch updating is complete.
Reset Maintenance
Information
This resets all the maintenance information.
1Press the INFO key.
This displays the info menu.
2Touch Maintenance .
3Touch Reset all .
4Touch Ye s .
▼
The resetting is complete.
Set Maintenance Information
Guidance
If maintenance information guidance is set,
after this product starts, this sets the guidance
display when the parts replacement date
approaches or is past.
1Press the INFO key.
This displays the info menu.
2Touch Maintenance .
3Touch “Guidance” for the part
to have guidance given about.
▼
This sets “Guidance”. : Give guidance : Do not give guidance

Other Settings 215
INFO/SETTINGS SETTINGS
Wipers
Item Settings content
Windshield Wipers Intermittent Operation Sets the operation interval for the windshield wipers.
* Some setting items are disabled for certain grades and vehicle
models.
Wipers Linked to Washer Sets automatic operation of the windshield wipers when the
washer fluid is sprayed.
Intelligent Washer Enables/disables the automatic cleaning function, which
automatically operates the windshield wipers while spraying the
washer fluid intermittently for a certain period of time.
Rear Wiper Intermittent Inter val Sets the operation interval for the rear wipers.
Rear Wiper Activated when in Rever se Sets automatic operation of the rear wipers when the selector
lever is moved to the R (reverse) position.
Exterior Lights/Interior Lights
Item
Settings content
Headlight Auto-Off Sets the function that automatically puts out the headlights if
they are ON and the driver switches OFF the engine and opens
the locked door in order to exit the vehicle.
Sensitivity for Auto Headlight On Timing
*Sets the function that automatically switches ON the headlights
when it becomes dark outside.
Headlight Timeout when exiting Vehicle Sets the duration the headlights stay ON after the driver exits
the vehicle.
Exterior Lights ON with Remote Unlock Sets the function that switches ON the lights when the remote
control Unlock button is pressed.
Interior Light Timeout Sets the duration the passenger compartment lights stays
ON when the engine is switched OFF with the passenger
compartment lights ON.
Interior Light Timeout after Door is Closed Sets duration the passenger compartment stays ON after the
doors are closed.
Charging Lid Light Auto cut-out
*Sets the lighting duration for the charging lid light.

216 Other Settings
Theft Alarm
Item
Settings content
Panic Alarm Enables/disables the panic alarm.
Turn Signal
Item Settings content
Operation in Key Position Sets the turn signal operation conditions.
Lane-change Signals (Flash 3 Times with 1 Touch) Enables/disables the function that flashes three times if you
gently operate the direction indicator lever when changing
lanes.
Activation Time for Lane-change Signals Sets the operating time for the direction indicator lever to trigger
the lane-change signal (flash 3 times for 1 touch) function.
Power Door Locks
Item
Settings content
Automatic Relock after Unlocked by Remote
*Sets the duration the door stays unlocked after it is unlocked
with keyless entry or the keyless operation key.
Automatic Unlock Sets automatic door unlocking.
Air Conditioner
Item Settings content
Recirculation Control Enables/disables the function that automatically switches
between recirculate and refresh mode.
A/C Switch Control Sets the A/C switch to Auto or Manual.
Eco Mode
*Allows you to set Eco Mode.(Vehicles with Eco switch)
Foot / Defroster Airflow Ratio Sets the airflow for the feet and defroster.
Face / Foot Airflow Ratio Sets the airflow for the upper body and the feet.
Automatic Rear Defrost at Engine Start Sets whether or not the rear defrost is operated when the
engine is started.

Other Settings 217
INFO/SETTINGS SETTINGS
Others
Item Settings content
Horn Answerback with Remote Engine Start
*Enables/disables the function that sounds the horn when the
engine is started with the remote controller.
Accessor y Power Timeout Sets the duration ACC stays ON when the ignition switch is
ACC.
Reset the Vehicle Settings
1Execute up to Step 2 in “Vehicle
Settings”(P213)
.
▼
2Touch Reset all .
3Touch Ye s .
▼
The resetting of equipment setting is
complete.

224 Troubleshooting
After the Car Batter y Has
Been Replaced
When the car battery is replaced, some of the
memory contents are deleted.
Example: the set route
(The set destination and any waypoints are
retained.)
If This Product Does Not
Start Up
If the map card program is damaged, use the
program disc to use functions other than the
navigation system.
NOTE
• The program disc for updating is
required. For details, please consult your
Mitsubishi Motors Dealer.
• Unlock the MAP card and audio SD card
locks beforehand.
• Do not use the Loading.kwi in the
“Program for Europe,Russia,Australia”
folder inside the program disc.
1Take the map card out of this
product.
ƒ
„
MAP Card
→“Remove the SD Card”(P16)
2Copy the “Loading.kwi” file
in the “Program for North
America” folder inside the
program disc onto an audio SD
card.
Copy from your home computer to the
audio SD card.
3Insert the audio SD card onto
which you copied the extracted
files into the map slot.
Audio SD Card
Map slot
→“Insert an SD Card”(P15)
4Switch the vehicle's engine
switch key to “OFF” first, then
switch to “ACC” or “ON”.
▼
The product starts up.

END USER LICENSE AGREEMENT OF THE NAVTEQ DATABASE 225
Other
END USER LICENSE AGREEMENT OF THE NAVTEQ DATABASE
END-USER TERMS
The data (“Data”) is provided for your personal, internal use on\
ly and not for
resale. It is protected by copyright, and is subject to the following t\
erms and
conditions which are agreed to by you, on the one hand, and NAVTEQ North
America, LLC (“NT”) and its licensors (including their licensor\
s and suppliers) on
the other hand.
© 2012 NAVTEQ. All rights reserved.
This data includes information taken with permission from Canadian autho\
rities,
including © Her Majesty the Queen in Right of Canada, © Queen's Pr\
inter for
Ontario, © Canada Post Corporation, GeoBase.®, © The Department of Natural
Resources Canada. All rights reserved.
NAVTEQ holds a non-exclusive license from the United States Postal Service\
®
to publish and sell ZIP+4® information.
©United States Postal Service® 2012. Prices are not established, \
controlled or
approved by the United States Postal Service®. The following trademarks and
registrations are owned by the USPS: United States Postal Service, USPS\
, and
ZIP+4.
TERMS AND CONDITIONS
Personal Use Only.
You agree to use this Data for the solely personal, non-commercial purpos\
es for
which you were licensed, and not for service bureau, time-sharing or oth\
er similar
purposes. Accordingly, but subject to the restrictions set forth in the following
paragraphs, you may copy this Data only as necessary for your personal u\
se to
(i) view it, and (ii) save it, provided that you do not remove any c\
opyright notices
that appear and do not modify the Data in any way. You agree not to otherwise
reproduce, copy, modify, decompile, disassemble or reverse engineer any portion
of this Data, and may not transfer or distribute it in any form, for any\
purpose,
except to the extent permitted by mandatory laws. Multi-disc sets may o\
nly be
transferred or sold as a complete set as provided by NT and not as a subset
thereof.
Restrictions.
Except where you have been specifically licensed to do so by NT, and without
limiting the preceding paragraph, you may not (a) use this Data with a\
ny
products, systems, or applications installed or otherwise connected to o\
r
in communication with vehicles, capable of vehicle navigation, positioni\
ng,
dispatch, real time route guidance, fleet management or similar applications;
or (b) with or in communication with any positioning devices or any mo\
bile or
wireless-connected electronic or computer devices, including without lim\
itation
cellular phones, palmtop and handheld computers, pagers, and personal di\
gital
assistants or PDAs.
Warning.
The Data may contain inaccurate or incomplete information due to the pas\
sage
of time, changing circumstances, sources used and the nature of collecti\
ng
comprehensive geographic data, any of which may lead to incorrect result\
s.
No Warranty.
This Data is provided to you “as is,” and you agree to use it at y\
our own risk.
NT and its licensors (and their licensors and suppliers) make no guarant\
ees,
representations or warranties of any kind, express or implied, arising b\
y law or
otherwise, including but not limited to, content, quality, accuracy, completeness,
effectiveness, reliability, fitness for a particular purpose, usefulness, use or results
to be obtained from this Data, or that the Data or server will be uninte\
rrupted or
error-free.
Continued on the next page