2014 MERCEDES-BENZ GL change wheel

Belt
see Seat belts
Belt force limiter
Activation ......................................... 59
Function ........................................... 59
Blind Spot Assist
Activating/deactivating.................281
Display message............................314
Notes/function..............................243
Trailer towing.................................245
see Active Blind Spot Assist
BlueTEC
Adding DEF....................................186
BlueTEC (DEF)....................................448
Brake Assist
see BAS (Brake Assist System)
Brake fluid
Display message............................297
Notes.............................................450
Brake lamps
Changing bulbs..............................140
Display message............................304
Brakes
ABS..................................................67
Adaptive Brake Assist......................71
BAS..................................................68
BAS PLUS........................................68
Brake fluid (notes).........................450
Display message............................291
High-performance brake system....195
Important safety notes..................193
Maintenance..................................194
Parking brake................................189
Riding tips ...................................... 193
Warning lamp ................................. 326
Breakdown
see Flat tire
see Towing away
Bulbs
see Replacing bulbs
C
California
Important notice for retail
customers and lessees....................25
Calling up a malfunction
see Display messages
Car
see Vehicle
Care
360° camera.................................380
Carpets..........................................383
Car wash ........................................ 376
Display...........................................381
Exhaust pipe..................................381
Exterior lights................................379
Gear or selector lever....................382
Interior...........................................381
Matte finish...................................378
Night View Assist Plus...................381
Notes.............................................376
Paint..............................................378
Plastic trim....................................382
Power washer................................377
Rear view camera..........................380
Roof lining ...................................... 383
Seat belt........................................383
Seat cover.....................................383
Sensors.........................................380
Steering wheel...............................382
Trim pieces....................................382
Washing by hand...........................377
Wheels...........................................379
Windows........................................379
Wiper blades..................................379
Wooden trim..................................382
Cargo compartment cover
Notes/how to use.........................346
Cargo compartment enlargement
Important safety notes..................344
Cargo compartment floor
Opening/closing............................347
Stowage well (under).....................347
Cargo tie down rings.........................345
Car key
see SmartKey
Car wash (care).................................376
CD player/CD changer (on-board
computer)..........................................278
Center console
Lower section..................................37
Upper section..................................36
6Index

hot parts of the exhaust system. There is a
risk of fire.
When driving off road or on unpaved roads,
check the vehicle's underside regularly. In
particular, remove parts of plants or other
flammable materials which have become
trapped. In the case of damage, contact a
qualified specialist workshop.
GWARNING
Modifications to electronic components, their
software as well as wiring can impair their
function and/or the function of other
networked components. In particular,
systems relevant to safety could also be
affected. As a result, these may no longer
function as intended and/or jeopardize the
operating safety of the vehicle. There is an
increased risk of an accident and injury.
Never tamper with the wiring as well as
electronic components or their software. You
should have all work to electrical and
electronic equipment carried out at a qualified
specialist workshop.
If you make any changes to the vehicle
electronics, the general operating permit is
rendered invalid.
!There is a risk of damage to the vehicle if:
Rthe vehicle becomes stuck, e.g. on a high
curb or an unpaved road
Ryou drive too fast over an obstacle, e.g.
a curb or a hole in the road
Ra heavy object strikes the undercarriage
or parts of the chassis
In situations like this, the body, the
undercarriage, chassis parts, wheels or
tires could be damaged without the
damage being visible. Components
damaged in this way can unexpectedly fail
or, in the case of an accident, no longer
withstand the strain they are designed to.
If the underbody paneling is damaged,
combustible materials such as leaves,
grass or twigs can gather between the
underbody and the underbody paneling. If
these materials come in contact with hot
parts of the exhaust system, they can catch
fire.
In such situations, have the vehicle
checked and repaired immediately at a
qualified specialist workshop. If on
continuing your journey you notice that
driving safety is impaired, pull over and
stop the vehicle immediately, paying
attention to road and traffic conditions. In
such cases, visit a qualified specialist
workshop.
Declarations of conformity
Vehicle components which receive
and/or transmit radio waves
USA:"The wireless devices of this vehicle
comply with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions: 1) These devices may not cause
harmful interference, and 2) These devices
must accept any interference received,
including interference that may cause
undesired operation. Changes or
modifications not expressly approved by the
party responsible for compliance could void
the user’s authority to operate the
equipment."
Canada:"The wireless devices of this vehicle
comply with Industry Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions: (1) These devices
may not cause interference, and (2) These
devices must accept any interference,
including interference that may cause
undesired operation of the device."
Diagnostics connection
The diagnostics connection is only intended
for the connection of diagnostic equipment at
a qualified specialist workshop.
Introduction27
Z

Problems with the seat ventilation
ProblemPossible causes/consequences andPPSolutions
The seat ventilation has
switched off
prematurely or cannot
be switched on.
The on-board voltage is too low because too many electrical
consumers are switched on.
XSwitch off electrical consumers that you do not need, such as
the rear window defroster or interior lighting.
Once the battery is sufficiently charged, the seat ventilation will
switch back on automatically.
Steering wheel
Important safety notes
GWARNING
You could lose control of your vehicle if you
do the following while driving:
Radjust the driver's seat, head restraint,
steering wheel or mirrors
Rfasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint,
steering wheel and mirror and fasten your
seat belt before starting the engine.
GWARNING
Children could injure themselves if they
adjust the steering wheel. There is a risk of
injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
Adjusting the steering wheel
manually
GWARNING
If the steering wheel is unlocked while the
vehicle is in motion, it could change position
unexpectedly. This could cause you to lose
control of the vehicle. There is a risk of an
accident.
Before starting off, make sure the steering
wheel is locked. Never unlock the steering
wheel while the vehicle is in motion.
CRelease lever
DTo adjust the steering wheel height

Overview: changing bulbs/bulb types
You can change the following bulbs. The bulb
type can be found in the legend.
Halogen headlamps
CLow-beam headlamp: H7 55 W
DHigh-beam headlamp: H7 55 W
Tail lamp
CBrake lamp: P 21 W-L
Changing the front bulbs
Removing and installing the cover in the
front wheel housing
You must remove the cover from the front
wheel housing before you can change the
front bulbs.
XTo remove:switch off the lights.
XTurn the front wheels inwards.
XRemove securing pinDusing a suitable
tool.
XSlide coverCup and remove it.
XTo install:insert coverCagain and slide
it down until it engages.
XInsert securing pinD.
Low-beam headlamps (halogen
headlamps)
XRemove the cover in the front wheel
housing (Ypage 138).
XTurn housing coverCcounter-clockwise
and pull it out.
XTurn bulb holderDcounter-clockwise and
pull it out.
XTake the bulb out of bulb holderD.
XInsert the new bulb into bulb holderD.
XInsert bulb holderDinto the lamp and turn
it clockwise.
138Replacing bulbs
Lights and windshield wipers

DNeutral
Do not shift the transmission toN
while driving. Otherwise, the
automatic transmission could be
damaged.
No power is transmitted from the
engine to the drive wheels.
Releasing the brakes will allow you
to move the vehicle freely, e.g. to
push it or tow it.
If ESP®is deactivated or faulty:
only shift the transmission to
positionNif the vehicle is in danger
of skidding, e.g. on icy roads.
If you switch off the engine using
the SmartKey or the Start/Stop
button, the automatic transmission
shifts to neutralNautomatically.
!Rolling in neutralNcan damage
the drive train.
:Drive
The automatic transmission
changes gear automatically. All
forward gears are available.
Changing gear
The automatic transmission shifts to the
individual gears automatically when it is in
transmission positionD. This automatic
gearshifting behavior is determined by:
Rthe position of the accelerator pedal
Rthe road speed
Driving tips
Kickdown
Use kickdown for maximum acceleration.
XDepress the accelerator pedal beyond the
pressure point.
The automatic transmission shifts to a
lower gear depending on the engine speed.
XEase off the accelerator pedal once the
desired speed is reached.
The automatic transmission shifts back up.
Rocking the vehicle free
Shifting the transmission repeatedly between
gearsDandRmay help to free the vehicle if
it has become stuck in slush or snow. The
vehicle's engine management system limits
the speed to a maximum of 5 mph (9 km/h)
when shifting back and forth. To shift back
and forth between transmission positionsD
andR, move the DIRECT SELECT selector
lever up and down past the point of
resistance.
Towing a trailer
XDrive in the middle of the engine speed
range on uphill gradients.
XDepending on the uphill or downhill
gradient, use left-hand steering wheel
paddle shifter (Ypage 177) to select a
lower gear, even if cruise control or
DISTRONIC PLUS are activated.
176Automatic transmission
Driving an d parking

Program selector button
General notes
Vehicles with the ON&OFFROAD package
XBriefly press program selector buttonC.
The letterMappears in the multifunction
display. The manual drive programMis
activated.
AMG vehiclesXPress program selector buttonC
repeatedly until the letter for the desired
gearshift program appears in the
multifunction display.
The program selector button allows you to
choose between different driving
characteristics.
iThe permanent drive programMis
available on the following vehicles:
RVehicles with the
ON&OFFROAD package
RAMG vehicles
Further information about permanent drive
programM(Ypage 179).
As well as this permanent drive program
M, you can also activate temporary drive
programM(Ypage 178).
iAMG vehicles:the automatic
transmission switches to automatic drive
programCeach time the engine is started.
iDrive programMis not saved after the
engine has been switched off. If required,
you must select the drive program again
after starting the engine.
Drive program on vehicles with the
ON&OFFROAD package
MManualPermanent manual
gearshifting
Drive programs on AMG vehicles
CControlled
Efficiency
Comfortable, economical
driving
SSportSporty driving style
MManualPermanent manual
gearshifting
iFor further information on the automatic
drive program, see (Ypage 178).
Steering wheel paddle shifters
In the manual drive program, you can change
gears manually using steering wheel paddle
shiftersCandD.
Automatic transmission177
Driving and parking
Z

Further information about permanent drive
programM(Ypage 179).
Further information about temporary drive
programM(Ypage 178).
iYou can only change gear with the
steering wheel paddle shifters when the
transmission is in positionD.
Automatic drive program (AMG
vehicles)
Automatic drive programs C and S
Drive programCis characterized by the
following:
Rcomfort-oriented engine and transmission
settings
Roptimal fuel consumption resulting from
the automatic transmission shifting up
sooner
Rthe vehicle pulling away more gently in
forward and reverse gears, unless the
accelerator pedal is depressed fully
Rincreased sensitivity. This improves driving
stability on slippery road surfaces, for
example
Rthe automatic transmission shifting up
sooner. This results in the vehicle being
driven at lower engine speeds and the
wheels being less likely to spin
Drive programSis characterized by the
following:
Rsporty engine and transmission settings
Rthe automatic transmission shifting up
later
Rthe fuel consumption possibly being higher
as a result of the later automatic
transmission shift points
Manual drive program M
General notes
In this drive program, you can briefly change
gear yourself by using the steering wheel
paddle shifters. The transmission must be in
positionD.
All vehicles (except AMG vehicles and
vehicles with the
ON&OFFROAD package):you can activate
manual drive programMusing the steering
wheel paddle shifters.
AMG vehicles:you can activate manual drive
programMin automatic drive programsCand
S.
Vehicles with the
ON&OFFROAD package:if manual drive
programMis deactivated using the program
selector button, you can activate manual
drive programMusing the steering wheel
paddle shifters.
iAs well as temporary drive programM,
you can also activate permanent drive
programM(Ypage 177).
Further information about permanent drive
programM(Ypage 179).
Activating
XShift the transmission to positionD.
XPull the left or right steering wheel paddle
shifter (Ypage 177).
Manual drive programMis temporarily
activated. The selected gear andMappear
in the multifunction display.
Shifting gears
If you pull on the left or right steering wheel
paddle shifter, the automatic transmission
switches to manual drive programMfor a
limited amount of time. Depending on which
paddle shifter is pulled, the automatic
transmission immediately shifts into the next
gear down or up, if permitted.
XTo shift up:pull the right-hand steering
wheel paddle shifter (Ypage 177).
The automatic transmission shifts up to the
next gear.
iIf the maximum engine speed on the
currently engaged gear is reached and you
continue to accelerate, the automatic
178Automatic transmission
Driving and parking

transmission automatically shifts up in
order to prevent engine damage.
XTo shift down:pull on the left-hand
steering wheel paddle shifter
(Ypage 177).
The automatic transmission shifts down to
the next gear.
iIf the engine exceeds the maximum
engine speed when shifting down, the
automatic transmission protects against
engine damage by not shifting down.
iAutomatic down shifting occurs when
coasting.
Shift recommendation
The gearshift recommendations assist you in
adopting an economical driving style. The
recommended gear is shown in the
multifunction display.
XShift to recommended gearDaccording
to gearshift recommendationCwhen
shown in the multifunction display of the
instrument cluster.
Deactivating
If you have activated manual drive program
M, it will remain active for a certain amount
of time. Under certain conditions the
minimum amount of time is extended, e.g. in
the case of lateral acceleration, during an
overrun phase or when driving on steep
terrain.
If manual drive programMhas been
deactivated, the automatic transmission
shifts into the automatic drive program that
was last selected.
You can also deactivate manual drive
programMyourself:
XPull on the right-hand steering wheel
paddle shifter and hold it in place
(Ypage 177).
or
XUse the DIRECT SELECT lever to switch the
transmission position.
or
XAMG vehicles:use the program selector
button to change the drive program
(Ypage 177).
Manual drive programMis deactivated.
The automatic transmission switches into
the automatic drive program that was last
selected, i.e.EorS.
or
XVehicles with the
ON&OFFROAD package:use the selector
wheel to switch to the on-road program
(Ypage 253) or the off-road program
(Ypage 258).
Manual drive program
General information
In this drive program, you can permanently
change gear yourself by using the steering
wheel paddle shifters. The transmission must
be in positionD.
iAs well as this permanent drive program
M, you can also activate temporary drive
programM(Ypage 178).
Switching on the manual drive program
In manual drive programM, you can change
gear using the steering wheel paddle shifters
if the transmission is in positionD. You can
see the currently selected drive program and
which gear is engaged in the multifunction
display.
Automatic transmission179
Driving and pa rking
Z