2014 MERCEDES-BENZ E-Class COUPE battery

[x] Cancel search: battery

Page 321 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual You can wash the vehicle in an automatic car
wash from the very start.
If the vehicle is very dirty, pre-wash it before
cleaning it in an automatic car wash.
After using an automatic car wash, wipe of

Page 332 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual Important safety notes
G
WARNING
When driving in emergency mode, the driving
characteristics deteriorate, e.g. when
cornering, accelerating quickly and when
braking. There is a risk of an accident.
Do

Page 333 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual R
if you push or pull the battery across the
carpet or other synthetic materials
R if you wipe the battery with a cloth G
WARNING
During the charging process, a battery
produces hydrogen gas. If a sho

Page 334 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual Battery acid is caustic. Avoid
contact with skin, eyes or clothing.
Wea
rsuitable protective clothing,
especially gloves, apro nand
faceguard.
Rinse any acid spills immediately
with clear water. Conta

Page 335 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual !
Only use battery chargers with a
maximum charging voltage of 14.8 V.
! Only charge the battery using the jump-
starting connection point.
The jump-starting connection point is in the
engine compartm

Page 336 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual Jump-starting
For the jump-starting procedure, use only the jump-starting connection point, consisting of a
positive terminal and a ground point, in the engine compartment. G
WARNING
Battery acid is c

Page 337 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual R
Only jump-start from batteries with a 12 V voltage rating.
R Only use jumper cables which have a sufficient cross-section and insulated terminal clamps.
R If the battery is fully discharged, leave t

Page 338 of 394

MERCEDES-BENZ E-Class COUPE 2014 C207 Owners Manual X
Before disconnecting the jumper cables, le tthe engine run for several minutes.
X First, remove the jumper cables from earth point 0020and negative terminal 0022, then from
positive clamp 0003and po
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 next >