2014 MERCEDES-BENZ C-Class COUPE garage door opener

Floormats
.......................................... .266
Fog lamps Switching on/off ........................... 107
Front fog lamps
Display message ............................ 215
Switching on/off ........................... 107
Fuel
Additives ........................................ 335
Consumption statistics ..................191
Displaying the current
consumption .................................. 192
Displaying the range ......................192
Driving tips .................................... 150
Fuel gauge ....................................... 29
Grade (gasoline) ............................ 335
Important safety notes ..................334
Notes for AMG vehicles .................335
Premium-grade unleaded gasoline .335
Problem (malfunction) ...................148
Refueling ........................................ 145
Tank content/reserve fuel .............334
Fuel filler flap
Opening/closing ............................ 146
Fuel level
Calling up the range (on-board
computer) ...................................... 192
Fuel tank
Capacity ........................................ 334
Problem (malfunction) ...................148
Fuse allocation chart (vehicle tool
kit) ...................................................... 282
Fuses Allocation chart ............................. 292
Before changing ............................. 292
Fuse box in the engine
compartment ................................. 293
Fuse box in the trunk .....................293
Important safety notes ..................292 G
Garage door opener Clearing the memory .....................266
Important safety notes ..................263
Opening/closing the garage door ..265
Programming (button in the rear-
view mirror) ................................... 263
Gear indicator (on-board computer) 203Gear or selector lever (cleaning
guidelines)
......................................... 278
Genuine parts ...................................... 20
Glove box ........................................... 247 H
Handbrake see Parking brake
Hazard warning lamps ......................109
Headlamps Adding fluid to cleaning system .....273
Cleaning system (function) ............109
Cleaning system (notes) ................338
Fogging up ..................................... 111
see Automatic headlamp mode
Head restraints
Adjusting ......................................... 95
Adjusting (electrically). ....................95
see NECK-PR Ohead restraints
Heating
see Climate control
High-beam headlamps
Changing bulbs .............................. 114
Display message ............................ 215
Switching on/off ........................... 109
Hill start assist .................................. 134
HOLD function Deactivating ................................... 167
Display message ............................ 221
Function/notes ............................. 166
Hood
Closing .......................................... .270
Display message ............................ 229
Important safety notes ..................269
Opening ......................................... 270
Hydroplaning ..................................... 154 I
Ignition lock see Key positions
Immobilizer .......................................... 69
Indicator lamps see Warning and indicator lamps 10
Index

PASSENGER AIR BAG OFF
Problem (malfunction) .....................49
Problems (malfunction) .................. 213
PASSENGE RAIR BAG OFF indicator
lamp ...................................................... 45
Plastic trim (cleaning instructions) .278
Power washers .................................. 275
Power windows see Side windows
PRE-SAFE ®
(anticipatory occupant
protection) Display message ............................ 209
Operation ........................................ .50
PRE-SAFE ®
Brake
Activating/deactivating .................198
Display message ............................ 210
Function/notes ................................ 67
Warning lamp ................................. 243
Program selector button ..................140
Protection of the environment General notes .................................. 20
Pulling away
Automatic transmission .................134 Q
Qualifie dspecialis tworkshop ...........24 R
RACE START (AMG vehicles) .............167
RACETIMER (on-board computer) ....204
Radar sensor system Activating/deactivating .................202
Display message ............................ 221
Radio
Selecting astation ......................... 194
see separate operating instructions
Radio-wave reception/
transmission in the vehicle
Declaratio nofconformity ................ 24
Reading lamp ..................................... 111
Rear compartment Setting the airv ents...................... 128
Rear fog lamp
Display message ............................ 215
Switching on/off ........................... 108Rear seat (folding the backrest
forwards/back)
................................. 248
Rear view camera Cleaning instructions .....................277
Function/notes ............................. 175
Rear-view mirror
Anti-glar e(manual) ........................ 100
Dipping (automatic) .......................102
Rear window defroster
Problem (malfunction) ...................127
Switching on/off ........................... 126
Refrigerant (air-conditioning
system)
Important safety notes ..................339
Refueling
Fuel gauge ....................................... 29
Important safety notes ..................145
Notes for AMG vehicles .................335
Refueling proces s.......................... 146
see Fuel
Releasing the parking lock
manually (automatic transmission) 145
Remote control Garage door opener .......................263
Programming (garage door opener) 263
Replacing bulbs
Important safety notes ..................112
Overview of bul btypes .................. 113
Reporting safety defects ....................25
Reserve (fuel tank) see Fuel
Reserve fuel
Display message ............................ 220
Warning lamp ................................. 240
see Fuel
Restraint system
see SRS (Supplemental Restraint
System)
Reverse gear
Engaging (automatic transmission) 138
Reversing feature
Panorama sliding sunroo f................ 87
Roller sunblind ................................. 88
Side windows ................................... 84
Trunk lid .......................................... .80
Roadside Assistance (breakdown) ....22 14
Index

Overhea
dcontrol panel Function Page
0002
0001
Switches the rear-
compartment interior
lighting on/off 112
0003
001C
Switches the
automatic interio rlighting
control on/off 112
0022
0013
Switches the right-
hand reading lamp on/off 111
0021
0002
Opens/closes the
panorama roof with power
tilt/sliding panel with roller
sunblinds 88
001F
0009
MB Info call button
(mbrace system) 258
0020
0008
SOS button (mbrace
system) 256 Function Page
0012
Rear-view mirror 100
0013
Buttons for the garage door
opener 265
0014
Microphone for mbrace
(emergency call system),
telephone and the Voice
Control System 1 0015
0007
Roadside Assistance
call button (mbrace
system) 258
0016
0013
Switches the left-
hand reading lamp on/off 111
0018
0004
Switches the front
interior lighting on/off 112
1
The Voice Control System is only available in combination with COMAND. Observe the additional operating
instructions. 34
Overhead control panelAt a glance

include tex
tmessage, e-mail or an automated
call.
The area can be determined as either a circle
or a polygon with a maximum of ten corners.
You can specify up to ten areas
simultaneously. Different settings are
possible for each area.
USA only: these settings can be called up
under "Owners Online" at http://
www.mbusa.com.
Alternatively, you can trigger an MB Info call
and inform the customer service
representative that you wish to activate geo
fencing.
Currently inactive areas can be activated by
textm essage.
Triggering the vehicle alarm With this function, you can trigger the
vehicle's panic alarm via textm essage. An
alarm sounds and the exterior lighting
flashes. Depending on the setting, the panic
alarm lasts five or ten seconds. Afterwards,
the alarm switches off. Garage door opener
Important safety notes G
WARNING
When you operate or program the garage door
with the integrated garage door opener,
persons in the range of movement of the
garage door can become trapped or struck by
the garage door. There is arisk of injury.
When using the integrated garage door
opener, always make sure that nobody is
within the range of movement of the garage
door. G
WARNING
Combustion engines emit poisonous exhaust
gases such as carbo nmonoxide. Inhaling
these exhaust gases leads to poisoning. There
is a risk of fatal injury. Therefore never leave the engine running in enclosed spaces
without sufficient ventilation.
The HomeLink ®
garage door opener
integrated in the rear-view mirror allows you
to operate up to three different door and gate
systems.
Use the integrated garage door opener only
on garage doors that:
R have safety stop and reverse features and
R meet current U.S. federal safety standards
When programming a garage door opener,
park the vehicle outside the garage.
i Certain garage door drives are
incompatible with the integrated garage
door opener. If you have difficulty
programming the integrated garage door
opener, contact an authorized Mercedes-
Benz Center.
Alternatively, you can call the following
telephone assistance services:
R USA: Mercedes-Benz Customer
Assistance Center at
1-800-FOR-MERCedes
R Canada: Customer Service at
1-800-387-0100
R HomeLink ®
hotline 1-800-355-3515
(free of charge)
More information on HomeLink ®
and/or
compatible products is also available
online at http://www.homelink.com.
i Notes on the declaration of conformity
(Y page 24).
USA: FCC ID: CB2HMIHL4
Canada: IC: 279B-HMIHL4
Programming Programming buttons
Observe the "Important safety notes"
(Y
page 263). Features
263Stowage and features Z

Integrated garage door opener in the rear-view
mirror
Garage door remote control 001Fis not part of
the integrated garage door opener.
X The first time before programming, clear
the integrated garage door opener memory
(Y page 266).
X Turn the SmartKey to position 2in the
ignition lock.
X Press and hold one of buttons 0003to0021 on
the integrated garage door opener.
After a short time, indicator lamp 0002lights
up yellow.
i Indicator lamp 0002lights up yellow as soon
as button 0003,0022or0021 is programmed for
the first time. If the selected button has
already been programmed, indicator
lamp 0002will only lightu p yellow after ten
seconds have elapsed.
X Release button 0003,0022or0021. Indicator
lamp 0002flashes yellow.
X Point garage door remote control 001F
towards buttons 0003to0021 on the rear-view
mirror at a distance of 2 to 8 inches (5 to
20 cm).
i The required distance between remote
control 001Fand the integrated garage door
opener depends on the garage door drive
system. Several attempts might be
necessary. You should test every position
for at least 25 seconds before trying
another position. X
Press and hold button 0020on remot econtrol
001F until indicator lamp 0002lights up green.
If indicator lamp 0002lights up green or
flashes, then programming has been
successful.
X Release button 0020on remote control 001Ffor
the garage door drive system.
X If indicator lamp 0002lights up red: repeat
the programming procedure for the
corresponding button on the rear-view
mirror. When doing so, vary the distance
between remote control 001Fand the rear-
view mirror.
i If the indicator lamp flashes green after
successful programming, the garage door
system is using a rolling code. After
programming, you must synchronize the
garage door opener integrated in the rear-
view mirror with the receiver of the garage
door system.
Synchronizing the rolling code
Observe the "Important safety notes"
(Y page 263).
Your vehicle must be within reach of the
garage door or exterior gate drive. Make sure
that neither your vehicle nor any persons/
objects are present within the sweep of the
door or gate.
X Turn the SmartKey to position 2in the
ignition lock.
X Press the program button of the door or
gate drive (see the door or gate drive
operating instructions, e.g. under
"programming of additional remote
controls").
i Usually, you now have 30seconds to
initiate the next step.
X Press previously programmed button 0003,
0022 or0021 of the integrated garage door
opener until the door closes.
The rolling code synchronization is then
complete. 264
FeaturesStowage and features

Notes on programming the remote
control
Canadia nradio frequency laws require a
"break" (or interruption) of the transmission
signals after broadcasting for a few seconds.
Therefore, these signals may no tlast long
enough for the integrated garage door
opener. The signal is no trecognized during
programming. Comparable with Canadian
law, some U.S.g arage door openers also
feature a "break".
Proceed as follows:
R if you live in Canada
R if you have difficulties programming the
garage door opener (regardless of where
you live) when using the programming
steps
X Press and hold one of buttons 0003to0021 on
the integrated garage door opener.
Afte rashort time, indicator lamp 0002lights
up yellow.
X Release the button.
Indicator lamp 0002flashes yellow.
X Press button 0020of garage door remote
control 001Ffor two seconds, then release it
for two seconds.
X Press button 0020againf or two seconds.
X Repeat this sequence on button 0020of
remote control 001Funtil indicator lamp 0002
lights up green.
If indicator lamp 0002turns red, repeat the
process.
X Continue with the other programming
steps (see above).
Problems when programming
If you are experiencing problems
programming the integrated garage door
opener on the rear-view mirror, take note of
the following instructions:
R Check the transmitter frequency of garage
door drive remote control 001F.This can
usually be found on the back of the remote
control. The integrated garage door opener is
compatible with devices that have units
which operate in the frequency range of
280to 433MHz.
R Replace the batteries in garage door
remote control 001F.This increases the
likelihood that garage door remote control
001F will transmit a stronga nd precise signal
to the integrated garage door opene rinthe
rear-view mirror.
R When programming, hold remote control
001F at varying distances and angles from the
button that you are programming. Try
various angles at a distance between 2and
12 inches (5to 30 cm) or at the same angle
but at varying distances.
R If another remote control for the same
garage door drive is available, repeat the
same programming steps with this remote
control. Before performing these steps,
make sure that new batteries have been
installed in garage door drive remote
control 001F.
R Note that some remote controls only
transmit for a limited amount of time (the
indicator lamp on the remote control goes
out). Press button 0020on remote control
001F again before transmission ends.
R Align the antenna cable of the garage door
opener unit. This can improve signal
reception/transmission.
Opening/closing the garage door After it has been programmed, the integrated
garage door opener performs the function of
the garage door system remote control.
Please also read the operating instructions
for the garage door system.
X
Turn the SmartKey to position 2in the
ignition lock.
X Press button 0003,0022or0021 which you have
programmed to operate the garage door.
Garage door system with a fixed code:
indicator lamp 0002lights up green. Features
265Stowage and features Z

Garage door system with a rolling code:
indicator lamp
0002flashes green.
i The transmitte rwill transmit a signal as
long as the button is pressed. The
transmission is halted after a maximum of
ten seconds and indicator lamp 0002lights
up yellow. Press button 0003,0022or0021 again
if necessary.
Clearing the memory X
Turn the SmartKey to position 2in the
ignition lock.
X Press buttons 0003and 0021.
The indicator lamp lights up yellow.
X Press and hold buttons 0003and 0021until the
indicator lamp turns green.
i Make sure that you clear the memory of
the integrated garage door opener before
selling the vehicle. Floormat on the driver's side
G
WARNING
Objects in the driver's footwell can restric tthe
pedal travel or obstruct adepressed pedal.
The operating and road safety of the vehicle
is jeopardized. There is a risk of an accident.
Make sure that all objects in the vehicle are
stowed correctly, and that they cannot enter
the driver's footwell. Install the floormats
securely and as specified in order to ensure
sufficien tclearance for the pedals. Do not use
loose floormats and do not place floormats on
top of one another. X
Slide the seat backwards.
X To install: place the floormat in the
footwell.
X Press studs 0002onto retainers 0003.
X To remove: pull the floormat off
retainers 0003.
X Remove the floormat. 266
FeaturesStowage and features