Operating example
Example: setting the radio station to FM
104.5 MHz.
X Press the 002Abutton once or several
times until the FM FMwaveband appears in the
status bar.
X To switch to the submenu bar: slide
00520064 the controller.
X To highlight Radio
Radioin the submenu bar:
Slide 00950052or turn 00790052007Athe controller. X
To confirm your selection: press0098the
controller.
A selection list with the functions in the
Radio Radio submenu appears. X
To highlight the Enter Frequency
Enter Frequency func-
tion:
Slide 009700520064or turn 00790052007Athe controller.
X To confirm your selection: press0098the
controller. i
Only permissible numbers for the fre-
quency range can be entered in front of the
decimal point. If non-permissible numbers
are entered after the decimal point, the
next lowest frequency is set.
X Press the 0080007F0084 number
keys on the keypad.
The station selected is played. Basic functions of Audio 20
Switching Audio 20 on/off
Overview 0043
Button 0043
0044 Thumbwheel
Switching Audio 20 on X
Press button 0043.
or
X If Audio 20 was on the last time the ignition
was switched off, turn the SmartKey to
position 2 in the ignition lock. 20
Basic functions of Audio 20At a glance
Remote control
Overview 0043
Switches the screen on/off
0044 Switches the button lighting on/off
0087 Selects the screen for the remote control
0085 Selects a menu or menu item
0083 Confirms a selection or setting
0084 Switches the sound on/off (for corded
headphones)
006B Adjusts the volume (for corded head-
phones)
006C Skips to a track, fast-forward/fast-rewind
006D Selects a track; direct entry
006E Exits a menu (back) Selecting the screen for the remote
control You can use the remote control to operate
one of the two rear screens at a time. To do
so, you must switch the remote control to the
desired screen.
X
To select the left-hand screen: turn
thumbwheel 0087until "L REAR" is high-
lighted in the window.
X To select the right-hand screen: turn
thumbwheel 0087until "R REAR" is high-
lighted in the window.
Switching the screen on/off i
If the SmartKey is in position 0or 1in the
ignition lock (see the vehicle Operator's
Manual), or the SmartKey is not inserted,
the screens in the rear will switch off after
30 minutes.
Before the screens switch off, they show a
message to this effect.
You can switch the screens back on. How-
ever, this will discharge the starter battery.
X Point the remote control at the rear-com-
partment screen which has been selected
for remote operation.
X Press button 0043on the remote control.
The respective rear screen switches on or
off.
i You can only switch the screens on using
the remote control if the ignition is
switched on.
Switching the button lighting on/off X
Press button 0044on the remote control.
Depending on the previous status, the but-
ton lighting is switched on or off.
i If you do not use the remote control for
about 15 seconds, the button lighting
switches off automatically. Rear Seat Entertainment
25At a glance
