2014 LEXUS RX270 child restraint

152
1-7. Safety information
RX350/270_EE
Installing child restraints
Follow the child restraint system manufacturer's instructions. Firmly
secure child restraints to the seats using a seat belt or ISOFIX rigid
anchors. Attach the top strap when installing a child restraint.
Installation with a seat belt
(→P. 153)
ISOFIX rigid anchors (ISOFIX
child restraint system)
(→P. 157)
Lower anchors are provided for
the outer rear seats. (Buttons
displaying the location of the
anchors are attached to the
seats.)
Anchor brackets
(for the top strap) (→P. 1 5 8 )
An anchor bracket is provided
for each rear seat.
RX350_270_EE_48D77E.book 152 ページ ２０１４年１月２４日　金曜日　午前１０時４分

153
1-7. Safety information
1
Before driving
RX350/270_EE
Installing child restraints using a seat belt
■Rear-facing  Baby seat/child seat
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
Place the child restraint system on
the rear seat facing the rear of the
vehicle.
Run the seat belt through the child
restraint system and insert the
plate into the buckle. Make sure
that the belt is not twisted.
Follow the directions given in the
child restraint system installation
manual and fix the child restraint
system securely in place.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 153 ページ ２０１４年１月２４日　金曜日　午前１０時４分

154
1-7. Safety information
RX350/270_EEIf your child restraint system is not
equipped with a lock-off (a seat
belt locking feature), secure the
child restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to ensure
that it is installed securely.
■Forward-facing  Child seat
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
Place the child restraint system on
the seat facing the front of the vehi-
cle.
STEP1
STEP2
RX350_270_EE_48D77E.book 154 ページ ２０１４年１月２４日　金曜日　午前１０時４分

155
1-7. Safety information
1
Before driving
RX350/270_EERun the seat belt through the child
restraint system and insert the
plate into the buckle. Make sure
that the belt is not twisted.
Follow the directions given in the
child restraint system installation
manual and fix the child restraint
system securely in place.
If your child restraint system is not
equipped with a lock-off (a seat
belt locking feature), secure the
child restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to ensure
that it is installed securely.
■Junior seat
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
STEP3
STEP1
RX350_270_EE_48D77E.book 155 ページ ２０１４年１月２４日　金曜日　午前１０時４分

156
1-7. Safety information
RX350/270_EEPlace the child restraint system on
the seat facing the front of the vehi-
cle.
Sit the child in the child restraint
system. Fit the seat belt to the child
restraint system according to the
manufacturer's instructions and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
Check that the shoulder belt is cor-
rectly positioned over the child's
shoulder, and that the lap belt is as
low as possible. (→P. 8 9 )
STEP2
STEP3
RX350_270_EE_48D77E.book 156 ページ ２０１４年１月２４日　金曜日　午前１０時４分

157
1-7. Safety information
1
Before driving
RX350/270_EE
Installation with ISOFIX rigid anchors (ISOFIX child restraint system)
Fold the seatback while pulling the
seatback angle adjustment lever.
Return the seatback and secure it
at the first lock position. (→P. 7 7 )
Widen the gap between
the seat cushion and seat-
back slightly.
Latch the buckles onto the
exclusive fixing bars.
If the child restraint has a top strap,
the top strap should be latched
onto the anchor brackets.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 157 ページ ２０１４年１月２４日　金曜日　午前１０時４分

158
1-7. Safety information
RX350/270_EE
Child restraint systems with a top strap
Secure the child restraint system
using the seat belt or ISOFIX rigid
anchors, and remove the head
restraint.
Open the anchor bracket cover,
latch the hook onto the anchor
bracket and tighten the top strap.
Make sure the top strap is securely
latched.
Replace the head restraint and lift
it up to the uppermost lock posi-
tion.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 158 ページ ２０１４年１月２４日　金曜日　午前１０時４分

159
1-7. Safety information
1
Before driving
RX350/270_EE
■When restraining a child restraint system
Depending on the type of your child restraint system, you will need a locking clip to
install a child restraint system properly. Follow the instructions provided by the man-
ufacturer of the system. If your child restraint system does not provide a locking clip,
you can purchase the following item from any authorized Lexus dealer or repairer,
or another duly qualified and equipped professional.
Locking clip for child restraint system
(Part No. 73119-22010)
RX350_270_EE_48D77E.book 159 ページ ２０１４年１月２４日　金曜日　午前１０時４分