2014 LEXUS RX270 bulb

519
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EEReplace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Connect the connector.
Shake the bulb base gently to
check that it is not loose, turn the
headlight high beams on once and
visually confirm that no light is leak-
ing through the mounting.
When replacing the right side bulb, install by conducting
with the directions reversed.
STEP4
STEP5
STEP5STEP6STEP5STEP1
RX350_270_EE_48D77E.book 519 ページ ２０１４年１月２４日　金曜日　午前１０時４分

520
4-3. Do-it-yourself maintenance
RX350/270_EE■Halogen headlight low beams (if equipped)
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
Replace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Shake the bulb base gently to
check that it is not loose, turn the
headlight low beams on once and
visually confirm that no light is leak-
ing through the mounting.
STEP1
STEP2
STEP3
STEP4
RX350_270_EE_48D77E.book 520 ページ ２０１４年１月２４日　金曜日　午前１０時４分

521
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EE■Front turn signal light
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP1
STEP2
RX350_270_EE_48D77E.book 521 ページ ２０１４年１月２４日　金曜日　午前１０時４分

522
4-3. Do-it-yourself maintenance
RX350/270_EE■Front fog lights
To allow enough working clear-
ance, turn the steering wheel to
the opposite side of the bulb to be
replaced.
Remove the fender liner bolt and
clips, and then partly remove the
fender liner.
Unplug the connector while
depressing the lock release.
Turn the bulb base counterclock-
wise.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 522 ページ ２０１４年１月２４日　金曜日　午前１０時４分

523
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EEReplace the light bulb, and install
the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Connect the connector.
Shake the bulb base gently to
check that it is not loose, turn the
front fog lights on once and visually
confirm that no light is leaking
through the mounting.
When replacing a light bulb, install by conducting with the
directions reversed.
STEP4
STEP5
STEP5STEP6STEP5STEP1
RX350_270_EE_48D77E.book 523 ページ ２０１４年１月２４日　金曜日　午前１０時４分

524
4-3. Do-it-yourself maintenance
RX350/270_EE■Rear turn signal and tail lights
Remove the access hole cover.
Use a flathead screwdriver
wrapped in a cloth.
Turn the bulb base counterclock-
wise.
Tail light
Rear turn signal light
Remove the light bulb.
Tail light
Rear turn signal light
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 524 ページ ２０１４年１月２４日　金曜日　午前１０時４分

525
4-3. Do-it-yourself maintenance
4
Maintenance and care
RX350/270_EE■Tail and back-up lights
Remove the access hole cover.
Use a flathead screwdriver
wrapped in a cloth.
Turn the bulb base counterclock-
wise.
Tail light
Back-up light
Remove the light bulb.
Tail light
Back-up light
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 525 ページ ２０１４年１月２４日　金曜日　午前１０時４分

526
4-3. Do-it-yourself maintenance
RX350/270_EE■Rear fog light (right side)
Remove the bolts using a Phillips-
head screwdriver and remove the
clip.
Removing the clip
Installing the clip
Turn the bulb base counterclock-
wise.
Remove the light bulb.
STEP1
STEP2
STEP3
RX350_270_EE_48D77E.book 526 ページ ２０１４年１月２４日　金曜日　午前１０時４分