2014 LEXUS LX570 cruise control

4413-2. Using the air conditio ning system and defogger
3
Interior features
LX570_OM_OM60L21U_(U) Using the voice command system
Press or to operate
the voice command system.
(  P. 429/“Navigation System
Owner’s Manual”)
Without dynamic radar cruise
control
With dynamic radar cruise con-
trol
Using the automatic mode
Press the “AUTO” button.
The air conditioning system will begin to operate. Air outlets
and fan speed are automatically adjusted according to the
temperature setting. “AUTO” will be displayed on the touch screen.
Press to switch to automatic air intake mode.
The air conditioning system au tomatically switches between
outside air and recirculated air modes.
Press to increase the temperature and to decrease
the temperature. The temperature for the driver’s and front passenger’s seats can be set
separately. A
B
STEP 1
STEP 2
STEP 3

4603-3. Using the audio system
LX570_OM_OM60L21U_(U) Using the voice command system
Press or to operate
the voice command system.
(  P. 429/“Navigation System
Owner’s Manual”)
Without dynamic radar cruise
control
With dynamic radar cruise con-
trol A
B
■
Using cellular phones
Interference may be heard through the audio system’s speakers if a cellular phone is
being used inside or close to the vehi cle while the audio system is operating.■
When using the touch screen
Dimmed screen buttons cannot be operated. ■
Ta b
Touch or , located either side of the screen tabs, to display tabs from the pre-
vious or next page. ■
About Dolby
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.

6313-5. Using the hands-free system (for cellular phone)
3
Interior features
LX570_OM_OM60L21U_(U) Touch the desired tab and choose
the desired data from the list.
Touch or press on the
steering wheel.
■ Calling using voice recognition
You can call by giving a voice command. ( 
P. 4 2 9 )
Ta l k s w i t c h
Without dynamic radar cruise
control
With dynamic radar cruise con-
trol
The “Call ” and “Dial ” operating procedures are
explained here. Other operating procedures are also similar. STEP 3
STEP 4
A
B

7944-3. Do-it-yourself maintenance
LX570_OM_OM60L21U_(U) 9 WIPER 30 A Windshield wiper
10 WSH 20 A Windshield washer
11 RR WIPER 15 A Rear window wiper and washer
12 4WD 20 A Four-wheel drive system
13 LH-IG 5 A Alternator, towing, seat heater and
ventilators, windshield wiper de-icer,
front seat belt, emergency flasher,
inverter switch, shift lever switch
14 ECU-IG No.1 5 A ABS, VSC, tilt and telescopic steer-
ing, gateway ECU, shift lock system,
parking assist system, cruise control
switch, pre-collision system, headlight
cleaner, multi-display assembly, rain-
sensing windshield wiper, driving posi-
tion memory system, power door lock
system
15 S/ROOF 25 A Moon roof
16 RR DOOR RH 20 A Po w e r w i n d o w s
17 MIR 15 A Mirror ECU, outside rear view mirror
defoggers
18 RR DOOR LH 20 A Po w e r w i n d o w s
19 FR DOOR LH 20 A Po w e r w i n d o w s
20 FR DOOR RH 20 A Po w e r w i n d o w sFuse Ampere Circuit

7974-3. Do-it-yourself maintenance
4
Maintenance and care
LX570_OM_OM60L21U_(U) Fuse Ampere Circuit
11 SEAT-A/C FAN 10 A Ventilators
12 SEAT-HTR 20 A Seat heaters
13 AFS 5 A Adaptive Front-lighting System
14 ECU-IG No.3 5 A Adaptive Front-lighting System,
dynamic radar cruise control system
15 STRG HTR 10 A Heated steering wheel
16 TV 10 A Multi-display assembly■
After a fuse is replaced ●
If the lights do not turn on even afte r the fuse has been replaced, a bulb may
need replacement. (  P. 7 9 9 )●
If the replaced fuse blows again, have the vehicle inspected by your Lexus
dealer.■
If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.

8345-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) (If equipped) Indicates a malfunction in the pre-collision system
A buzzer also sounds.
(If equipped) Indicates a malfunction in the intuitive parking assist
The site of malfunction is shown flashing on the dis-
play.
Indicates a malfunction in the cruise control system
Press the “ON-OFF” button once to deactivate the
system, and then press the button again to reactivate
the system.
Indicates a malfunction in the dynamic radar cruise
control system (if equipped)
Press the “ON-OFF” button once to deactivate the
system, and then press the button again to reactivate
the system.Wa r n i n g m e s s a g e Details

8405-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) Wa r n i n g m e s s a g e Details Correction procedure
(Flashes)
(If equipped) Indicates that the pre-
collision system is not
currently functional
because the grille or the
sensor is dirty • Check the grille and the
sensor and clean them if
they are dirty.
• In case of overheating,
the system will become
functional once the sys-
tem cools down.Indicates that the pre-
collision system is not
currently functional due
to overheating.
(If equipped) Indicates that intuitive
parking assist sensor is
dirty or covered with ice Clean the sensor.
(If equipped) Indicates that the
dynamic radar cruise
control sensor is dirty or
covered with ice Clean the sensor.

5
When trouble arises
8415-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) Wa r n i n g m e s s a g e Details Correction procedure
(If equipped) Indicates that the
dynamic radar cruise
control system is unable
to judge vehicle-to-vehi-
cle distance • Switch driving mode to
either normal or power.
• If the windshield wipers
are on, turn them off or
set them to either inter-
mittent or slow mode.
(Flashes)
(If equipped) Indicates that your vehi-
cle is nearing the vehicle
ahead (in vehicle-to-vehi-
cle distance control
mode)
A buzzer also sounds. Slow the vehicle by apply-
ing the brakes.
Indicates that remaining
fuel is approximately 4.0
gal. (15.0L, 3.3 Imp.gal.)
or less Refuel the vehicle.