2014 Lexus IS250 phone

132
2. DESTINATION SEARCH
IS300h/250_Navi_EE
■ROAD PREFERENCES
1Select “Road preference”.
2Select the desired road preferences
and select “OK”.
zThe system will avoid using routes that
include items whose indicators are off.
DESTINATION MAP SCREEN
No.FunctionPage
Select to scroll the map to
the desired point.103
Select to display POIs
around the destination.104
Select to view the name,
address and telephone
number of the selected
point.

Select to change the road
preference.132
Select to determine the
map location of destination.
If a destination has already
been set, “A d d t o ” and
“Replace ” will be dis-
played.
“A d d t o ”: Select to add a
destination.
“Replace ”: Select to de-
lete the existing destina-
tion(s) and set a new one.

If the searched point has
been precisely identified
based on a detailed ad-
dress, appears on the
point.

INFORMATION
●
Even if the motorway indicator is
dimmed, the route cannot avoid including
a motorway in some cases.
●If the calculated route includes a trip by
ferry, the route guidance shows a sea
route. After traveling by ferry, the current
position may be incorrect. Upon recep-
tion of GPS signals, it is automatically
corrected.
IS_Navi_EE_53C71E.book 132 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

152
4. MY MEMORY
IS300h/250_Navi_EE
1Select “Register”.
2Select the desired item to search for the
location. (→P.116)
3Select “OK” when the editing home
screen appears. (→P.152)
1Select “Edit”.
2Select the desired item to be edited.
3Select “OK”.
REGISTERING HOMEEDITING HOME
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.157
Select to edit the home
name.158
Select to display the home
name on the map screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.158
Select to edit the telephone
number.158
IS_Navi_EE_53C71E.book 152 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

154
4. MY MEMORY
IS300h/250_Navi_EE
1Select “Register”.
2Select the desired item to search for the
location. (→P.116)
3Select a position for this quick access.
4Select “OK” when the editing quick ac-
cess screen appears. (→P.154)
1Select “Edit”.
2Select the desired quick access.
3Select the desired item to be edited.
4Select “OK”.
REGISTERING QUICK
ACCESS
INFORMATION
●
Up to 5 preset destinations can be regis-
tered.
EDITING QUICK ACCESS
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.157
Select to edit the quick ac-
cess name.158
Select to display the quick
access name on the map
screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.158
Select to edit the telephone
number.158
IS_Navi_EE_53C71E.book 154 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

156
4. MY MEMORY
IS300h/250_Navi_EE
1Select “Register”.
2Select the desired item to search for the
location. (→P.116)
3Select “OK” when the editing memory
point screen appears. (→P.156)
1Select “Edit”.
2Select the desired memory point.
3Select the desired item to be edited.
4Select “OK”.
REGISTERING MEMORY
POINTS
INFORMATION
●
Up to 500 memory points can be regis-
tered.
●When registering establishments that
were set as destinations using an online
search, select “Previous”.
EDITING MEMORY POINTS
The icon, name, location, telephone
number and/or group of a registered
memory point can be edited.
No.FunctionPage
Select to change the icon to
be displayed on the map
screen.157
Select to edit the memory
point name.158
Select to display the memo-
ry point name on the map
screen.
When set to on, the indica-
tor will illuminate.

Select to edit location infor-
mation.158
Select to edit the telephone
number.158
Select to register group.158
IS_Navi_EE_53C71E.book 156 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

158
4. MY MEMORY
IS300h/250_Navi_EE
■CHANGING THE NAME
1Select “Name”.
2Enter the desired name and select
“OK”.
■CHANGING THE LOCATION
1Select “Location”.
2Scroll the map to the desired point
(→P.103) and select “OK”.
■CHANGING TELEPHONE NUM-
BER
1Select “Tel. no.”.
2Enter the number and select “OK”.
■SETTING THE GROUP
1Select “Group”.
2Select the group the memory point is to
be registered with.
Memory point groups can be set and
changed.
IS_Navi_EE_53C71E.book 158 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

239
3. MEDIA OPERATION
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
4
CAUTION
●Do not operate the player’s controls or connect to the Bluetooth® audio system while driv-
ing.
●Your audio unit is fitted with Bluetooth
® antennas. People with implantable cardiac pace-
makers, cardiac resynchronization therapy-pacemakers or implantable cardioverter
defibrillators should maintain a reasonable distance between themselves and the
Bluetooth
® antennas. The radio waves may affect the operation of such devices.
●Before using Bluetooth
® devices, users of any electrical medical device other than implant-
able cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable
cardioverter defibrillators should consult the manufacturer of the device for information
about its operation under the influence of radio waves. Radio waves could have unexpected
effects on the operation of such medical devices.
NOTICE
●Do not leave your portable player in the vehicle. In particular, high temperatures inside the
vehicle may damage the portable player.
INFORMATION
●Depending on the Bluetooth® device that is connected to the system, the music may start
playing when selecting while it is paused. Conversely, the music may pause when
selecting while it is playing.
●In the following conditions, the system may not function:
• The Bluetooth
® device is turned off.
• The Bluetooth
® device is not connected.
• The Bluetooth
® device has a low battery.
●It may take time to connect the telephone when Bluetooth
® audio is being played.
●For operating the portable player, see the instruction manual that comes with it.
●If the Bluetooth
® device is disconnected due to poor reception from the Bluetooth® net-
work when the engine switch is in ACCESSORY or IGNITION ON mode,
the system automatically reconnects the portable player.
●If the Bluetooth
® device is disconnected on purpose, such as it was turned off, this does not
happen. Reconnect the portable player manually.
●Bluetooth
® device information is registered when the Bluetooth® device is connected to
the Bluetooth® audio system. When selling or disposing of the vehicle, remove the
Bluetooth® audio information from the system. (→P. 8 2 )
IS_Navi_EE_53C71E.book 239 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

258
IS300h/250_Navi_EE
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
1. OPERATING INFORMATION
NOTICE
●To avoid damage to the audio/visual sys-
tem:
• Be careful not to spill beverages over
the audio/visual system.
• Do not put anything other than an
appropriate disc into the disc slot.
INFORMATION
●The use of a cellular phone inside or near
the vehicle may cause a noise from the
speakers of the audio/visual system which
you are listening to. However, this does
not indicate a malfunction.
RADIO
Usually, a problem with radio reception
does not mean there is a problem with
the radio — it is just the normal result of
conditions outside the vehicle.
For example, nearby buildings and ter-
rain can interfere with FM reception.
Power lines or telephone wires can in-
terfere with AM signals. And of course,
radio signals have a limited range. The
farther the vehicle is from a station, the
weaker its signal will be. In addition, re-
ception conditions change constantly as
the vehicle moves.
Here, some common reception prob-
lems that probably do not indicate a
problem with the radio are described.
IS_Navi_EE_53C71E.book 258 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

265
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
IS300h/250_Navi_EE
AUDIO/VISUAL SYSTEM
4z“Made for iPod” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to
iPod or iPhone, respectively, and has been
certified by the developer to meet Apple
performance standards.
zApple is not responsible for the operation
of this device or its compliance with safety
and regulatory standards. Please note that
the use of this accessory with iPod or
iPhone, may affect wireless performance.
ziPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Lightning is a trademark of Apple Inc.
zThe Lightning connector works with
iPhone 5, iPod touch (5th generation), and
iPod nano (7th generation).
zThe 30-pin connector works with iPhone
4S, iPhone 4, iPhone 3GS, iPhone 3G,
iPhone, iPod touch (1st through 4th genera-
tion), iPod classic, and iPod nano (1st
through 6th generation).
zUSB works with iPhone 5, iPhone 4S,
iPhone 4, iPhone 3GS, iPhone 3G, iPhone,
iPod touch (1st through 5th generation),
iPod classic, and iPod nano (1st through 7th
generation).
The following iPod®, iPod nano®, iPod
classic®, iPod touch® and iPhone® devic-
es can be used with this system.
Made for
• iPod touch (5th generation)*
• iPod touch (4th generation)
• iPod touch (3rd generation)
• iPod touch (2nd generation)
• iPod touch (1st generation)
• iPod classic
• iPod with video
• iPod nano (7th generation)*
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod nano (4th generation)
• iPod nano (3rd generation)
• iPod nano (1st generation)
•iPhone 5*
•iPhone 4S
•iPhone 4
•iPhone 3GS
•iPhone 3G
•iPhone
*: iPod video not supported
iPodCOMPATIBLE MODELS
INFORMATION
●Depending on differences between mod-
els or software versions etc., some mod-
els might be incompatible with this
system.
IS_Navi_EE_53C71E.book 265 ページ ２０１４年５月２９日　木曜日　午前１１時２２分